diff mbox series

[RFC,v11,08/19] uapi|audit|ipe: add ipe auditing support

Message ID 1696457386-3010-9-git-send-email-wufan@linux.microsoft.com (mailing list archive)
State Handled Elsewhere
Delegated to: Paul Moore
Headers show
Series Integrity Policy Enforcement LSM (IPE) | expand

Commit Message

Fan Wu Oct. 4, 2023, 10:09 p.m. UTC
From: Deven Bowers <deven.desai@linux.microsoft.com>

Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malicious actions on their systems with respect to IPE
itself.

This patch introduces 3 new audit events.

AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation
of a resource.
AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy
has been changed to another loaded policy.
AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded
into the kernel.

This patch also adds support for success auditing, allowing users to
identify why an allow decision was made for a resource. However, it is
recommended to use this option with caution, as it is quite noisy.

Here are some examples of the new audit record types:

AUDIT_IPE_ACCESS(1420):

    audit: AUDIT1420 path="/root/vol/bin/hello" dev="sda"
      ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW"

    audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0"
      ino=2 rule="DEFAULT action=DENY"

    audit: AUDIT1420 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs"
      ino=131 rule="DEFAULT action=DENY"

The above three records were generated when the active IPE policy only
allows binaries from the initial booted drive(sda) to run. The three
identical `hello` binary were placed at different locations, only the
first hello from sda was allowed.

Field path followed by the file's path name.

Field dev followed by the device name as found in /dev where the file is
from.
Note that for device mappers it will use the name `dm-X` instead of
the name in /dev/mapper.
For a file in a temp file system, which is not from a device, it will use
`tmpfs` for the field.
The implementation of this part is following another existing use case
LSM_AUDIT_DATA_INODE in security/lsm_audit.c

Field ino followed by the file's inode number.

Field rule followed by the IPE rule made the access decision. The whole
rule must be audited because the decision is based on the combination of
all property conditions in the rule.

Along with the syscall audit event, user can know why a blocked
happened. For example:

    audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0"
      ino=2 rule="DEFAULT action=DENY"
    audit[1956]: SYSCALL arch=c000003e syscall=59
      success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0
      a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0
      gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0
      ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null)

The above two records showed bash used execve to run "hello" and got
blocked by IPE. Note that the IPE records are always prior to a SYSCALL
record.

AUDIT_IPE_CONFIG_CHANGE(1421):

    audit: AUDIT1421
      old_active_pol_name="Allow_All" old_active_pol_version=0.0.0
      old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649
      new_active_pol_name="boot_verified" new_active_pol_version=0.0.0
      new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F
      auid=4294967295 ses=4294967295 lsm=ipe res=1

The above record showed the current IPE active policy switch from
`Allow_All` to `boot_verified` along with the version and the hash
digest of the two policies. Note IPE can only have one policy active
at a time, all access decision evaluation is based on the current active
policy.
The normal procedure to deploy a policy is loading the policy to deploy
into the kernel first, then switch the active policy to it.

AUDIT_IPE_POLICY_LOAD(1422):

audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0
policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD
auid=4294967295 ses=4294967295 lsm=ipe res=1

The above record showed a new policy has been loaded into the kernel
with the policy name, policy version and policy hash.

Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
---

v2:
  + Split evaluation loop, access control hooks,
    and evaluation loop from policy parser and userspace
    interface to pass mailing list character limit

v3:
  + Move ipe_load_properties to patch 04.
  + Remove useless 0-initializations
  + Prefix extern variables with ipe_
  + Remove kernel module parameters, as these are
    exposed through sysctls.
  + Add more prose to the IPE base config option
    help text.
  + Use GFP_KERNEL for audit_log_start.
  + Remove unnecessary caching system.
  + Remove comments from headers
  + Use rcu_access_pointer for rcu-pointer null check
  + Remove usage of reqprot; use prot only.
  + Move policy load and activation audit event to 03/12

v4:
  + Remove sysctls in favor of securityfs nodes
  + Re-add kernel module parameters, as these are now
    exposed through securityfs.
  + Refactor property audit loop to a separate function.

v5:
  + fix minor grammatical errors
  + do not group rule by curly-brace in audit record,
    reconstruct the exact rule.

v6:
  + No changes

v7:
  + Further split lsm creation, the audit system, the evaluation loop,
    and access control hooks into separate patches.
  + Further split audit system patch into two separate patches; one
    for include/uapi, and the usage of the new defines.
  + Split out the permissive functionality into another separate patch,
    for easier review.
  + Correct misuse of audit_log_n_untrusted string to audit_log_format
  + Use get_task_comm instead of comm directly.
  + Quote certain audit values
  + Remove unnecessary help text on choice options - these were
    previously
    idented at the wrong level
  + Correct a stale string constant (ctx_ns_enforce to ctx_enforce)

v8:

  + Change dependency for CONFIG_AUDIT to CONFIG_AUDITSYSCALL
  + Drop ctx_* prefix
  + Reuse, where appropriate, the audit fields from the field
    dictionary. This transforms:
      ctx_pathname  -> path
      ctx_ino       -> ino
      ctx_dev       -> dev

  + Add audit records and event examples to commit description.
  + Remove new_audit_ctx, replace with audit_log_start. All data that
    would provided by new_audit_ctx is already present in the syscall
    audit record, that is always emitted on these actions. The audit
    records should be correlated as such.
  + Change audit types:
    + AUDIT_TRUST_RESULT                -> AUDIT_IPE_ACCESS
      +  This prevents overloading of the AVC type.
    + AUDIT_TRUST_POLICY_ACTIVATE       -> AUDIT_MAC_CONFIG_CHANGE
    + AUDIT_TRUST_POLICY_LOAD           -> AUDIT_MAC_POLICY_LOAD
      + There were no significant difference in meaning between
        these types.

  + Remove enforcing parameter passed from the context structure
    for AUDIT_IPE_ACCESS.
    +  This field can be inferred from the SYSCALL audit event,
       based on the success field.

  + Remove all fields already captured in the syscall record. "hook",
    an IPE specific field, can be determined via the syscall field in
    the syscall record itself, so it has been removed.
      + ino, path, and dev in IPE's record refer to the subject of the
        syscall, while the syscall record refers to the calling process.

  + remove IPE prefix from policy load/policy activation events
  + fix a bug wherein a policy change audit record was not fired when
    updating a policy

v9:
  + Merge the AUDIT_IPE_ACCESS definition with the audit support commit
  + Change the audit format of policy load and switch
  + Remove the ipe audit kernel switch

v10:
  + Create AUDIT_IPE_CONFIG_CHANGE and AUDIT_IPE_POLICY_LOAD
  + Change field names per upstream feedback

v11:
  + Fix style issues
---
 include/uapi/linux/audit.h |   3 +
 security/ipe/Kconfig       |   2 +-
 security/ipe/Makefile      |   1 +
 security/ipe/audit.c       | 195 +++++++++++++++++++++++++++++++++++++
 security/ipe/audit.h       |  18 ++++
 security/ipe/eval.c        |  32 ++++--
 security/ipe/eval.h        |   8 ++
 security/ipe/fs.c          |  70 +++++++++++++
 security/ipe/policy.c      |   5 +
 9 files changed, 327 insertions(+), 7 deletions(-)
 create mode 100644 security/ipe/audit.c
 create mode 100644 security/ipe/audit.h

Comments

Paul Moore Oct. 24, 2023, 3:52 a.m. UTC | #1
On Oct  4, 2023 Fan Wu <wufan@linux.microsoft.com> wrote:
> 
> Users of IPE require a way to identify when and why an operation fails,
> allowing them to both respond to violations of policy and be notified
> of potentially malicious actions on their systems with respect to IPE
> itself.
> 
> This patch introduces 3 new audit events.
> 
> AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation
> of a resource.
> AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy
> has been changed to another loaded policy.
> AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded
> into the kernel.
> 
> This patch also adds support for success auditing, allowing users to
> identify why an allow decision was made for a resource. However, it is
> recommended to use this option with caution, as it is quite noisy.
> 
> Here are some examples of the new audit record types:
> 
> AUDIT_IPE_ACCESS(1420):
> 
>     audit: AUDIT1420 path="/root/vol/bin/hello" dev="sda"
>       ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW"
> 
>     audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0"
>       ino=2 rule="DEFAULT action=DENY"
> 
>     audit: AUDIT1420 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs"
>       ino=131 rule="DEFAULT action=DENY"
> 
> The above three records were generated when the active IPE policy only
> allows binaries from the initial booted drive(sda) to run. The three
> identical `hello` binary were placed at different locations, only the
> first hello from sda was allowed.
> 
> Field path followed by the file's path name.
> 
> Field dev followed by the device name as found in /dev where the file is
> from.
> Note that for device mappers it will use the name `dm-X` instead of
> the name in /dev/mapper.
> For a file in a temp file system, which is not from a device, it will use
> `tmpfs` for the field.
> The implementation of this part is following another existing use case
> LSM_AUDIT_DATA_INODE in security/lsm_audit.c
> 
> Field ino followed by the file's inode number.
> 
> Field rule followed by the IPE rule made the access decision. The whole
> rule must be audited because the decision is based on the combination of
> all property conditions in the rule.
> 
> Along with the syscall audit event, user can know why a blocked
> happened. For example:
> 
>     audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0"
>       ino=2 rule="DEFAULT action=DENY"
>     audit[1956]: SYSCALL arch=c000003e syscall=59
>       success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0
>       a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0
>       gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0
>       ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null)
> 
> The above two records showed bash used execve to run "hello" and got
> blocked by IPE. Note that the IPE records are always prior to a SYSCALL
> record.
> 
> AUDIT_IPE_CONFIG_CHANGE(1421):
> 
>     audit: AUDIT1421
>       old_active_pol_name="Allow_All" old_active_pol_version=0.0.0
>       old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649
>       new_active_pol_name="boot_verified" new_active_pol_version=0.0.0
>       new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F
>       auid=4294967295 ses=4294967295 lsm=ipe res=1
> 
> The above record showed the current IPE active policy switch from
> `Allow_All` to `boot_verified` along with the version and the hash
> digest of the two policies. Note IPE can only have one policy active
> at a time, all access decision evaluation is based on the current active
> policy.
> The normal procedure to deploy a policy is loading the policy to deploy
> into the kernel first, then switch the active policy to it.
> 
> AUDIT_IPE_POLICY_LOAD(1422):
> 
> audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0
> policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD
> auid=4294967295 ses=4294967295 lsm=ipe res=1
> 
> The above record showed a new policy has been loaded into the kernel
> with the policy name, policy version and policy hash.
> 
> Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
> Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
> ---
> 
> v2:
>   + Split evaluation loop, access control hooks,
>     and evaluation loop from policy parser and userspace
>     interface to pass mailing list character limit
> 
> v3:
>   + Move ipe_load_properties to patch 04.
>   + Remove useless 0-initializations
>   + Prefix extern variables with ipe_
>   + Remove kernel module parameters, as these are
>     exposed through sysctls.
>   + Add more prose to the IPE base config option
>     help text.
>   + Use GFP_KERNEL for audit_log_start.
>   + Remove unnecessary caching system.
>   + Remove comments from headers
>   + Use rcu_access_pointer for rcu-pointer null check
>   + Remove usage of reqprot; use prot only.
>   + Move policy load and activation audit event to 03/12
> 
> v4:
>   + Remove sysctls in favor of securityfs nodes
>   + Re-add kernel module parameters, as these are now
>     exposed through securityfs.
>   + Refactor property audit loop to a separate function.
> 
> v5:
>   + fix minor grammatical errors
>   + do not group rule by curly-brace in audit record,
>     reconstruct the exact rule.
> 
> v6:
>   + No changes
> 
> v7:
>   + Further split lsm creation, the audit system, the evaluation loop,
>     and access control hooks into separate patches.
>   + Further split audit system patch into two separate patches; one
>     for include/uapi, and the usage of the new defines.
>   + Split out the permissive functionality into another separate patch,
>     for easier review.
>   + Correct misuse of audit_log_n_untrusted string to audit_log_format
>   + Use get_task_comm instead of comm directly.
>   + Quote certain audit values
>   + Remove unnecessary help text on choice options - these were
>     previously
>     idented at the wrong level
>   + Correct a stale string constant (ctx_ns_enforce to ctx_enforce)
> 
> v8:
> 
>   + Change dependency for CONFIG_AUDIT to CONFIG_AUDITSYSCALL
>   + Drop ctx_* prefix
>   + Reuse, where appropriate, the audit fields from the field
>     dictionary. This transforms:
>       ctx_pathname  -> path
>       ctx_ino       -> ino
>       ctx_dev       -> dev
> 
>   + Add audit records and event examples to commit description.
>   + Remove new_audit_ctx, replace with audit_log_start. All data that
>     would provided by new_audit_ctx is already present in the syscall
>     audit record, that is always emitted on these actions. The audit
>     records should be correlated as such.
>   + Change audit types:
>     + AUDIT_TRUST_RESULT                -> AUDIT_IPE_ACCESS
>       +  This prevents overloading of the AVC type.
>     + AUDIT_TRUST_POLICY_ACTIVATE       -> AUDIT_MAC_CONFIG_CHANGE
>     + AUDIT_TRUST_POLICY_LOAD           -> AUDIT_MAC_POLICY_LOAD
>       + There were no significant difference in meaning between
>         these types.
> 
>   + Remove enforcing parameter passed from the context structure
>     for AUDIT_IPE_ACCESS.
>     +  This field can be inferred from the SYSCALL audit event,
>        based on the success field.
> 
>   + Remove all fields already captured in the syscall record. "hook",
>     an IPE specific field, can be determined via the syscall field in
>     the syscall record itself, so it has been removed.
>       + ino, path, and dev in IPE's record refer to the subject of the
>         syscall, while the syscall record refers to the calling process.
> 
>   + remove IPE prefix from policy load/policy activation events
>   + fix a bug wherein a policy change audit record was not fired when
>     updating a policy
> 
> v9:
>   + Merge the AUDIT_IPE_ACCESS definition with the audit support commit
>   + Change the audit format of policy load and switch
>   + Remove the ipe audit kernel switch
> 
> v10:
>   + Create AUDIT_IPE_CONFIG_CHANGE and AUDIT_IPE_POLICY_LOAD
>   + Change field names per upstream feedback
> 
> v11:
>   + Fix style issues
> ---
>  include/uapi/linux/audit.h |   3 +
>  security/ipe/Kconfig       |   2 +-
>  security/ipe/Makefile      |   1 +
>  security/ipe/audit.c       | 195 +++++++++++++++++++++++++++++++++++++
>  security/ipe/audit.h       |  18 ++++
>  security/ipe/eval.c        |  32 ++++--
>  security/ipe/eval.h        |   8 ++
>  security/ipe/fs.c          |  70 +++++++++++++
>  security/ipe/policy.c      |   5 +
>  9 files changed, 327 insertions(+), 7 deletions(-)
>  create mode 100644 security/ipe/audit.c
>  create mode 100644 security/ipe/audit.h

...

> diff --git a/security/ipe/audit.c b/security/ipe/audit.c
> new file mode 100644
> index 000000000000..e123701d5e3b
> --- /dev/null
> +++ b/security/ipe/audit.c
> @@ -0,0 +1,195 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) Microsoft Corporation. All rights reserved.
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/audit.h>
> +#include <linux/types.h>
> +#include <crypto/hash.h>
> +
> +#include "ipe.h"
> +#include "eval.h"
> +#include "hooks.h"
> +#include "policy.h"
> +#include "audit.h"
> +
> +#define ACTSTR(x) ((x) == IPE_ACTION_ALLOW ? "ALLOW" : "DENY")
> +
> +#define IPE_AUDIT_HASH_ALG "sha256"
> +
> +#define AUDIT_POLICY_LOAD_FMT "policy_name=\"%s\" policy_version=%hu.%hu.%hu "\
> +			      "policy_digest=" IPE_AUDIT_HASH_ALG ":"
> +#define AUDIT_OLD_ACTIVE_POLICY_FMT "old_active_pol_name=\"%s\" "\
> +				    "old_active_pol_version=%hu.%hu.%hu "\
> +				    "old_policy_digest=" IPE_AUDIT_HASH_ALG ":"
> +#define AUDIT_NEW_ACTIVE_POLICY_FMT "new_active_pol_name=\"%s\" "\
> +				    "new_active_pol_version=%hu.%hu.%hu "\
> +				    "new_policy_digest=" IPE_AUDIT_HASH_ALG ":"
> +
> +static const char *const audit_op_names[__IPE_OP_MAX] = {
> +	"EXECUTE",
> +	"FIRMWARE",
> +	"KMODULE",
> +	"KEXEC_IMAGE",
> +	"KEXEC_INITRAMFS",
> +	"IMA_POLICY",
> +	"IMA_X509_CERT",
> +};
> +
> +static const char *const audit_prop_names[__IPE_PROP_MAX] = {
> +	"boot_verified=FALSE",
> +	"boot_verified=TRUE",
> +};

I would suggest taking the same approach for both @audit_op_names and
@audit_prop_names; either include the field name in the string array
for both or leave it out of both.

> +/**
> + * audit_rule - audit an IPE policy rule approximation.
> + * @ab: Supplies a pointer to the audit_buffer to append to.
> + * @r: Supplies a pointer to the ipe_rule to approximate a string form for.
> + */
> +static void audit_rule(struct audit_buffer *ab, const struct ipe_rule *r)
> +{
> +	const struct ipe_prop *ptr;
> +
> +	audit_log_format(ab, "rule=\"op=%s ", audit_op_names[r->op]);
> +
> +	list_for_each_entry(ptr, &r->props, next)
> +		audit_log_format(ab, "%s ", audit_prop_names[ptr->type]);
> +
> +	audit_log_format(ab, "action=%s\"", ACTSTR(r->action));
> +}
> +
> +/**
> + * ipe_audit_match - audit a match for IPE policy.
> + * @ctx: Supplies a pointer to the evaluation context that was used in the
> + *	 evaluation.
> + * @match_type: Supplies the scope of the match: rule, operation default,
> + *		global default.
> + * @act: Supplies the IPE's evaluation decision, deny or allow.
> + * @r: Supplies a pointer to the rule that was matched, if possible.
> + * @enforce: Supplies the enforcement/permissive state at the point
> + *	     the enforcement decision was made.
> + */

Does it make sense to move @match_type into the ipe_eval_ctx struct?

> +void ipe_audit_match(const struct ipe_eval_ctx *const ctx,
> +		     enum ipe_match match_type,
> +		     enum ipe_action_type act, const struct ipe_rule *const r)
> +{
> +	struct inode *inode;
> +	struct audit_buffer *ab;
> +	const char *op = audit_op_names[ctx->op];
> +
> +	if (act != IPE_ACTION_DENY && !READ_ONCE(success_audit))
> +		return;
> +
> +	ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS);
> +	if (!ab)
> +		return;
> +
> +	if (ctx->file) {
> +		audit_log_d_path(ab, "path=", &ctx->file->f_path);
> +		inode = file_inode(ctx->file);
> +		if (inode) {
> +			audit_log_format(ab, " dev=");
> +			audit_log_untrustedstring(ab, inode->i_sb->s_id);
> +			audit_log_format(ab, " ino=%lu ", inode->i_ino);
> +		}
> +	}
> +
> +	if (match_type == IPE_MATCH_RULE)
> +		audit_rule(ab, r);
> +	else if (match_type == IPE_MATCH_TABLE)
> +		audit_log_format(ab, "rule=\"DEFAULT op=%s action=%s\"", op,
> +				 ACTSTR(act));
> +	else
> +		audit_log_format(ab, "rule=\"DEFAULT action=%s\"",
> +				 ACTSTR(act));
> +
> +	audit_log_end(ab);
> +}

--
paul-moore.com
Fan Wu Nov. 2, 2023, 10:55 p.m. UTC | #2
On 10/23/2023 8:52 PM, Paul Moore wrote:
> On Oct  4, 2023 Fan Wu <wufan@linux.microsoft.com> wrote:
>>
>> Users of IPE require a way to identify when and why an operation fails,
>> allowing them to both respond to violations of policy and be notified
>> of potentially malicious actions on their systems with respect to IPE
>> itself.
>>
>> This patch introduces 3 new audit events.
>>
>> AUDIT_IPE_ACCESS(1420) indicates the result of an IPE policy evaluation
>> of a resource.
>> AUDIT_IPE_CONFIG_CHANGE(1421) indicates the current active IPE policy
>> has been changed to another loaded policy.
>> AUDIT_IPE_POLICY_LOAD(1422) indicates a new IPE policy has been loaded
>> into the kernel.
>>
>> This patch also adds support for success auditing, allowing users to
>> identify why an allow decision was made for a resource. However, it is
>> recommended to use this option with caution, as it is quite noisy.
>>
>> Here are some examples of the new audit record types:
>>
>> AUDIT_IPE_ACCESS(1420):
>>
>>      audit: AUDIT1420 path="/root/vol/bin/hello" dev="sda"
>>        ino=3897 rule="op=EXECUTE boot_verified=TRUE action=ALLOW"
>>
>>      audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0"
>>        ino=2 rule="DEFAULT action=DENY"
>>
>>      audit: AUDIT1420 path="/tmp/tmpdp2h1lub/deny/bin/hello" dev="tmpfs"
>>        ino=131 rule="DEFAULT action=DENY"
>>
>> The above three records were generated when the active IPE policy only
>> allows binaries from the initial booted drive(sda) to run. The three
>> identical `hello` binary were placed at different locations, only the
>> first hello from sda was allowed.
>>
>> Field path followed by the file's path name.
>>
>> Field dev followed by the device name as found in /dev where the file is
>> from.
>> Note that for device mappers it will use the name `dm-X` instead of
>> the name in /dev/mapper.
>> For a file in a temp file system, which is not from a device, it will use
>> `tmpfs` for the field.
>> The implementation of this part is following another existing use case
>> LSM_AUDIT_DATA_INODE in security/lsm_audit.c
>>
>> Field ino followed by the file's inode number.
>>
>> Field rule followed by the IPE rule made the access decision. The whole
>> rule must be audited because the decision is based on the combination of
>> all property conditions in the rule.
>>
>> Along with the syscall audit event, user can know why a blocked
>> happened. For example:
>>
>>      audit: AUDIT1420 path="/mnt/ipe/bin/hello" dev="dm-0"
>>        ino=2 rule="DEFAULT action=DENY"
>>      audit[1956]: SYSCALL arch=c000003e syscall=59
>>        success=no exit=-13 a0=556790138df0 a1=556790135390 a2=5567901338b0
>>        a3=ab2a41a67f4f1f4e items=1 ppid=147 pid=1956 auid=4294967295 uid=0
>>        gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts0
>>        ses=4294967295 comm="bash" exe="/usr/bin/bash" key=(null)
>>
>> The above two records showed bash used execve to run "hello" and got
>> blocked by IPE. Note that the IPE records are always prior to a SYSCALL
>> record.
>>
>> AUDIT_IPE_CONFIG_CHANGE(1421):
>>
>>      audit: AUDIT1421
>>        old_active_pol_name="Allow_All" old_active_pol_version=0.0.0
>>        old_policy_digest=sha256:E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649
>>        new_active_pol_name="boot_verified" new_active_pol_version=0.0.0
>>        new_policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F
>>        auid=4294967295 ses=4294967295 lsm=ipe res=1
>>
>> The above record showed the current IPE active policy switch from
>> `Allow_All` to `boot_verified` along with the version and the hash
>> digest of the two policies. Note IPE can only have one policy active
>> at a time, all access decision evaluation is based on the current active
>> policy.
>> The normal procedure to deploy a policy is loading the policy to deploy
>> into the kernel first, then switch the active policy to it.
>>
>> AUDIT_IPE_POLICY_LOAD(1422):
>>
>> audit: AUDIT1422 policy_name="boot_verified" policy_version=0.0.0
>> policy_digest=sha256:820EEA5B40CA42B51F68962354BA083122A20BB846F26765076DD
>> auid=4294967295 ses=4294967295 lsm=ipe res=1
>>
>> The above record showed a new policy has been loaded into the kernel
>> with the policy name, policy version and policy hash.
>>
>> Signed-off-by: Deven Bowers <deven.desai@linux.microsoft.com>
>> Signed-off-by: Fan Wu <wufan@linux.microsoft.com>
...
>> ---
>>   include/uapi/linux/audit.h |   3 +
>>   security/ipe/Kconfig       |   2 +-
>>   security/ipe/Makefile      |   1 +
>>   security/ipe/audit.c       | 195 +++++++++++++++++++++++++++++++++++++
>>   security/ipe/audit.h       |  18 ++++
>>   security/ipe/eval.c        |  32 ++++--
>>   security/ipe/eval.h        |   8 ++
>>   security/ipe/fs.c          |  70 +++++++++++++
>>   security/ipe/policy.c      |   5 +
>>   9 files changed, 327 insertions(+), 7 deletions(-)
>>   create mode 100644 security/ipe/audit.c
>>   create mode 100644 security/ipe/audit.h
> 
> ...
> 
>> diff --git a/security/ipe/audit.c b/security/ipe/audit.c
>> new file mode 100644
>> index 000000000000..e123701d5e3b
>> --- /dev/null
>> +++ b/security/ipe/audit.c
>> @@ -0,0 +1,195 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) Microsoft Corporation. All rights reserved.
>> + */
>> +
>> +#include <linux/slab.h>
>> +#include <linux/audit.h>
>> +#include <linux/types.h>
>> +#include <crypto/hash.h>
>> +
>> +#include "ipe.h"
>> +#include "eval.h"
>> +#include "hooks.h"
>> +#include "policy.h"
>> +#include "audit.h"
>> +
>> +#define ACTSTR(x) ((x) == IPE_ACTION_ALLOW ? "ALLOW" : "DENY")
>> +
>> +#define IPE_AUDIT_HASH_ALG "sha256"
>> +
>> +#define AUDIT_POLICY_LOAD_FMT "policy_name=\"%s\" policy_version=%hu.%hu.%hu "\
>> +			      "policy_digest=" IPE_AUDIT_HASH_ALG ":"
>> +#define AUDIT_OLD_ACTIVE_POLICY_FMT "old_active_pol_name=\"%s\" "\
>> +				    "old_active_pol_version=%hu.%hu.%hu "\
>> +				    "old_policy_digest=" IPE_AUDIT_HASH_ALG ":"
>> +#define AUDIT_NEW_ACTIVE_POLICY_FMT "new_active_pol_name=\"%s\" "\
>> +				    "new_active_pol_version=%hu.%hu.%hu "\
>> +				    "new_policy_digest=" IPE_AUDIT_HASH_ALG ":"
>> +
>> +static const char *const audit_op_names[__IPE_OP_MAX] = {
>> +	"EXECUTE",
>> +	"FIRMWARE",
>> +	"KMODULE",
>> +	"KEXEC_IMAGE",
>> +	"KEXEC_INITRAMFS",
>> +	"IMA_POLICY",
>> +	"IMA_X509_CERT",
>> +};
>> +
>> +static const char *const audit_prop_names[__IPE_PROP_MAX] = {
>> +	"boot_verified=FALSE",
>> +	"boot_verified=TRUE",
>> +};
> 
> I would suggest taking the same approach for both @audit_op_names and
> @audit_prop_names; either include the field name in the string array
> for both or leave it out of both.
>
Yes sure, I will move the "op=" into audit_op_names.

>> +/**
>> + * audit_rule - audit an IPE policy rule approximation.
>> + * @ab: Supplies a pointer to the audit_buffer to append to.
>> + * @r: Supplies a pointer to the ipe_rule to approximate a string form for.
>> + */
>> +static void audit_rule(struct audit_buffer *ab, const struct ipe_rule *r)
>> +{
>> +	const struct ipe_prop *ptr;
>> +
>> +	audit_log_format(ab, "rule=\"op=%s ", audit_op_names[r->op]);
>> +
>> +	list_for_each_entry(ptr, &r->props, next)
>> +		audit_log_format(ab, "%s ", audit_prop_names[ptr->type]);
>> +
>> +	audit_log_format(ab, "action=%s\"", ACTSTR(r->action));
>> +}
>> +
>> +/**
>> + * ipe_audit_match - audit a match for IPE policy.
>> + * @ctx: Supplies a pointer to the evaluation context that was used in the
>> + *	 evaluation.
>> + * @match_type: Supplies the scope of the match: rule, operation default,
>> + *		global default.
>> + * @act: Supplies the IPE's evaluation decision, deny or allow.
>> + * @r: Supplies a pointer to the rule that was matched, if possible.
>> + * @enforce: Supplies the enforcement/permissive state at the point
>> + *	     the enforcement decision was made.
>> + */
> 
> Does it make sense to move @match_type into the ipe_eval_ctx struct?
> 
I feel the @match_type is part of the evaluation result information, 
which is the result of the context against the active policy. So I 
prefer keeping it as a local variable in the evaluation loop.

-Fan
>> +void ipe_audit_match(const struct ipe_eval_ctx *const ctx,
>> +		     enum ipe_match match_type,
>> +		     enum ipe_action_type act, const struct ipe_rule *const r)
>> +{
>> +	struct inode *inode;
>> +	struct audit_buffer *ab;
>> +	const char *op = audit_op_names[ctx->op];
>> +
>> +	if (act != IPE_ACTION_DENY && !READ_ONCE(success_audit))
>> +		return;
>> +
>> +	ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS);
>> +	if (!ab)
>> +		return;
>> +
>> +	if (ctx->file) {
>> +		audit_log_d_path(ab, "path=", &ctx->file->f_path);
>> +		inode = file_inode(ctx->file);
>> +		if (inode) {
>> +			audit_log_format(ab, " dev=");
>> +			audit_log_untrustedstring(ab, inode->i_sb->s_id);
>> +			audit_log_format(ab, " ino=%lu ", inode->i_ino);
>> +		}
>> +	}
>> +
>> +	if (match_type == IPE_MATCH_RULE)
>> +		audit_rule(ab, r);
>> +	else if (match_type == IPE_MATCH_TABLE)
>> +		audit_log_format(ab, "rule=\"DEFAULT op=%s action=%s\"", op,
>> +				 ACTSTR(act));
>> +	else
>> +		audit_log_format(ab, "rule=\"DEFAULT action=%s\"",
>> +				 ACTSTR(act));
>> +
>> +	audit_log_end(ab);
>> +}
> 
> --
> paul-moore.com
diff mbox series

Patch

diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index d676ed2b246e..75e21a135483 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -143,6 +143,9 @@ 
 #define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
 #define AUDIT_MAC_CALIPSO_ADD	1418	/* NetLabel: add CALIPSO DOI entry */
 #define AUDIT_MAC_CALIPSO_DEL	1419	/* NetLabel: del CALIPSO DOI entry */
+#define AUDIT_IPE_ACCESS	1420	/* IPE denial or grant */
+#define AUDIT_IPE_CONFIG_CHANGE	1421	/* IPE config change */
+#define AUDIT_IPE_POLICY_LOAD	1422	/* IPE policy load */
 
 #define AUDIT_FIRST_KERN_ANOM_MSG   1700
 #define AUDIT_LAST_KERN_ANOM_MSG    1799
diff --git a/security/ipe/Kconfig b/security/ipe/Kconfig
index e4875fb04883..ac4d558e69d5 100644
--- a/security/ipe/Kconfig
+++ b/security/ipe/Kconfig
@@ -5,7 +5,7 @@ 
 
 menuconfig SECURITY_IPE
 	bool "Integrity Policy Enforcement (IPE)"
-	depends on SECURITY && SECURITYFS
+	depends on SECURITY && SECURITYFS && AUDIT && AUDITSYSCALL
 	select PKCS7_MESSAGE_PARSER
 	select SYSTEM_DATA_VERIFICATION
 	help
diff --git a/security/ipe/Makefile b/security/ipe/Makefile
index cfbed03a8885..2279eaa3cea3 100644
--- a/security/ipe/Makefile
+++ b/security/ipe/Makefile
@@ -13,3 +13,4 @@  obj-$(CONFIG_SECURITY_IPE) += \
 	policy.o \
 	policy_fs.o \
 	policy_parser.o \
+	audit.o \
diff --git a/security/ipe/audit.c b/security/ipe/audit.c
new file mode 100644
index 000000000000..e123701d5e3b
--- /dev/null
+++ b/security/ipe/audit.c
@@ -0,0 +1,195 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Microsoft Corporation. All rights reserved.
+ */
+
+#include <linux/slab.h>
+#include <linux/audit.h>
+#include <linux/types.h>
+#include <crypto/hash.h>
+
+#include "ipe.h"
+#include "eval.h"
+#include "hooks.h"
+#include "policy.h"
+#include "audit.h"
+
+#define ACTSTR(x) ((x) == IPE_ACTION_ALLOW ? "ALLOW" : "DENY")
+
+#define IPE_AUDIT_HASH_ALG "sha256"
+
+#define AUDIT_POLICY_LOAD_FMT "policy_name=\"%s\" policy_version=%hu.%hu.%hu "\
+			      "policy_digest=" IPE_AUDIT_HASH_ALG ":"
+#define AUDIT_OLD_ACTIVE_POLICY_FMT "old_active_pol_name=\"%s\" "\
+				    "old_active_pol_version=%hu.%hu.%hu "\
+				    "old_policy_digest=" IPE_AUDIT_HASH_ALG ":"
+#define AUDIT_NEW_ACTIVE_POLICY_FMT "new_active_pol_name=\"%s\" "\
+				    "new_active_pol_version=%hu.%hu.%hu "\
+				    "new_policy_digest=" IPE_AUDIT_HASH_ALG ":"
+
+static const char *const audit_op_names[__IPE_OP_MAX] = {
+	"EXECUTE",
+	"FIRMWARE",
+	"KMODULE",
+	"KEXEC_IMAGE",
+	"KEXEC_INITRAMFS",
+	"IMA_POLICY",
+	"IMA_X509_CERT",
+};
+
+static const char *const audit_prop_names[__IPE_PROP_MAX] = {
+	"boot_verified=FALSE",
+	"boot_verified=TRUE",
+};
+
+/**
+ * audit_rule - audit an IPE policy rule approximation.
+ * @ab: Supplies a pointer to the audit_buffer to append to.
+ * @r: Supplies a pointer to the ipe_rule to approximate a string form for.
+ */
+static void audit_rule(struct audit_buffer *ab, const struct ipe_rule *r)
+{
+	const struct ipe_prop *ptr;
+
+	audit_log_format(ab, "rule=\"op=%s ", audit_op_names[r->op]);
+
+	list_for_each_entry(ptr, &r->props, next)
+		audit_log_format(ab, "%s ", audit_prop_names[ptr->type]);
+
+	audit_log_format(ab, "action=%s\"", ACTSTR(r->action));
+}
+
+/**
+ * ipe_audit_match - audit a match for IPE policy.
+ * @ctx: Supplies a pointer to the evaluation context that was used in the
+ *	 evaluation.
+ * @match_type: Supplies the scope of the match: rule, operation default,
+ *		global default.
+ * @act: Supplies the IPE's evaluation decision, deny or allow.
+ * @r: Supplies a pointer to the rule that was matched, if possible.
+ * @enforce: Supplies the enforcement/permissive state at the point
+ *	     the enforcement decision was made.
+ */
+void ipe_audit_match(const struct ipe_eval_ctx *const ctx,
+		     enum ipe_match match_type,
+		     enum ipe_action_type act, const struct ipe_rule *const r)
+{
+	struct inode *inode;
+	struct audit_buffer *ab;
+	const char *op = audit_op_names[ctx->op];
+
+	if (act != IPE_ACTION_DENY && !READ_ONCE(success_audit))
+		return;
+
+	ab = audit_log_start(audit_context(), GFP_KERNEL, AUDIT_IPE_ACCESS);
+	if (!ab)
+		return;
+
+	if (ctx->file) {
+		audit_log_d_path(ab, "path=", &ctx->file->f_path);
+		inode = file_inode(ctx->file);
+		if (inode) {
+			audit_log_format(ab, " dev=");
+			audit_log_untrustedstring(ab, inode->i_sb->s_id);
+			audit_log_format(ab, " ino=%lu ", inode->i_ino);
+		}
+	}
+
+	if (match_type == IPE_MATCH_RULE)
+		audit_rule(ab, r);
+	else if (match_type == IPE_MATCH_TABLE)
+		audit_log_format(ab, "rule=\"DEFAULT op=%s action=%s\"", op,
+				 ACTSTR(act));
+	else
+		audit_log_format(ab, "rule=\"DEFAULT action=%s\"",
+				 ACTSTR(act));
+
+	audit_log_end(ab);
+}
+
+/**
+ * audit_policy - Audit a policy's name, version and thumbprint to @ab.
+ * @ab: Supplies a pointer to the audit buffer to append to.
+ * @p: Supplies a pointer to the policy to audit.
+ */
+static void audit_policy(struct audit_buffer *ab,
+			 const char *audit_format,
+			 const struct ipe_policy *const p)
+{
+	u8 *digest = NULL;
+	struct crypto_shash *tfm;
+	SHASH_DESC_ON_STACK(desc, tfm);
+
+	tfm = crypto_alloc_shash(IPE_AUDIT_HASH_ALG, 0, 0);
+	if (IS_ERR(tfm))
+		return;
+
+	desc->tfm = tfm;
+
+	digest = kzalloc(crypto_shash_digestsize(tfm), GFP_KERNEL);
+	if (!digest)
+		goto out;
+
+	if (crypto_shash_init(desc))
+		goto out;
+
+	if (crypto_shash_update(desc, p->pkcs7, p->pkcs7len))
+		goto out;
+
+	if (crypto_shash_final(desc, digest))
+		goto out;
+
+	audit_log_format(ab, audit_format, p->parsed->name,
+			 p->parsed->version.major, p->parsed->version.minor,
+			 p->parsed->version.rev);
+	audit_log_n_hex(ab, digest, crypto_shash_digestsize(tfm));
+
+out:
+	kfree(digest);
+	crypto_free_shash(tfm);
+}
+
+/**
+ * ipe_audit_policy_activation - Audit a policy being made the active policy.
+ * @p: Supplies a pointer to the policy to audit.
+ */
+void ipe_audit_policy_activation(const struct ipe_policy *const op,
+				 const struct ipe_policy *const np)
+{
+	struct audit_buffer *ab;
+
+	ab = audit_log_start(audit_context(), GFP_KERNEL,
+			     AUDIT_IPE_CONFIG_CHANGE);
+	if (!ab)
+		return;
+
+	audit_policy(ab, AUDIT_OLD_ACTIVE_POLICY_FMT, op);
+	audit_log_format(ab, " ");
+	audit_policy(ab, AUDIT_NEW_ACTIVE_POLICY_FMT, np);
+	audit_log_format(ab, " auid=%u ses=%u lsm=ipe res=1",
+			 from_kuid(&init_user_ns, audit_get_loginuid(current)),
+			 audit_get_sessionid(current));
+
+	audit_log_end(ab);
+}
+
+/**
+ * ipe_audit_policy_load - Audit a policy being loaded into the kernel.
+ * @p: Supplies a pointer to the policy to audit.
+ */
+void ipe_audit_policy_load(const struct ipe_policy *const p)
+{
+	struct audit_buffer *ab;
+
+	ab = audit_log_start(audit_context(), GFP_KERNEL,
+			     AUDIT_IPE_POLICY_LOAD);
+	if (!ab)
+		return;
+
+	audit_policy(ab, AUDIT_POLICY_LOAD_FMT, p);
+	audit_log_format(ab, " auid=%u ses=%u lsm=ipe res=1",
+			 from_kuid(&init_user_ns, audit_get_loginuid(current)),
+			 audit_get_sessionid(current));
+
+	audit_log_end(ab);
+}
diff --git a/security/ipe/audit.h b/security/ipe/audit.h
new file mode 100644
index 000000000000..0ff5a06808de
--- /dev/null
+++ b/security/ipe/audit.h
@@ -0,0 +1,18 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Microsoft Corporation. All rights reserved.
+ */
+
+#ifndef _IPE_AUDIT_H
+#define _IPE_AUDIT_H
+
+#include "policy.h"
+
+void ipe_audit_match(const struct ipe_eval_ctx *const ctx,
+		     enum ipe_match match_type,
+		     enum ipe_action_type act, const struct ipe_rule *const r);
+void ipe_audit_policy_load(const struct ipe_policy *const p);
+void ipe_audit_policy_activation(const struct ipe_policy *const op,
+				 const struct ipe_policy *const np);
+
+#endif /* _IPE_AUDIT_H */
diff --git a/security/ipe/eval.c b/security/ipe/eval.c
index bdac4abc0ddb..499b6b3338f2 100644
--- a/security/ipe/eval.c
+++ b/security/ipe/eval.c
@@ -10,12 +10,15 @@ 
 #include <linux/sched.h>
 #include <linux/rcupdate.h>
 #include <linux/spinlock.h>
+#include <linux/moduleparam.h>
 
 #include "ipe.h"
 #include "eval.h"
 #include "policy.h"
+#include "audit.h"
 
 struct ipe_policy __rcu *ipe_active_policy;
+bool success_audit;
 
 static const struct super_block *pinned_sb;
 static DEFINE_SPINLOCK(pin_lock);
@@ -112,6 +115,7 @@  int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx)
 {
 	bool match = false;
 	enum ipe_action_type action;
+	enum ipe_match match_type;
 	struct ipe_policy *pol = NULL;
 	const struct ipe_rule *rule = NULL;
 	const struct ipe_op_table *rules = NULL;
@@ -127,9 +131,9 @@  int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx)
 
 	if (ctx->op == IPE_OP_INVALID) {
 		rcu_read_unlock();
-		if (pol->parsed->global_default_action == IPE_ACTION_DENY)
-			return -EACCES;
-		return 0;
+		action = pol->parsed->global_default_action;
+		match_type = IPE_MATCH_GLOBAL;
+		goto eval;
 	}
 
 	rules = &pol->parsed->rules[ctx->op];
@@ -147,14 +151,21 @@  int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx)
 			break;
 	}
 
-	if (match)
+	if (match) {
 		action = rule->action;
-	else if (rules->default_action != IPE_ACTION_INVALID)
+		match_type = IPE_MATCH_RULE;
+	} else if (rules->default_action != IPE_ACTION_INVALID) {
 		action = rules->default_action;
-	else
+		match_type = IPE_MATCH_TABLE;
+	} else {
 		action = pol->parsed->global_default_action;
+		match_type = IPE_MATCH_GLOBAL;
+	}
 
 	rcu_read_unlock();
+eval:
+	ipe_audit_match(ctx, match_type, action, rule);
+
 	if (action == IPE_ACTION_DENY)
 		return -EACCES;
 
@@ -178,3 +189,12 @@  void ipe_invalidate_pinned_sb(const struct super_block *mnt_sb)
 
 	spin_unlock(&pin_lock);
 }
+
+/* Set the right module name */
+#ifdef KBUILD_MODNAME
+#undef KBUILD_MODNAME
+#define KBUILD_MODNAME "ipe"
+#endif
+
+module_param(success_audit, bool, 0400);
+MODULE_PARM_DESC(success_audit, "Start IPE with success auditing enabled");
diff --git a/security/ipe/eval.h b/security/ipe/eval.h
index 9769da42c65f..5473f712566c 100644
--- a/security/ipe/eval.h
+++ b/security/ipe/eval.h
@@ -14,6 +14,7 @@ 
 #define IPE_EVAL_CTX_INIT ((struct ipe_eval_ctx){ 0 })
 
 extern struct ipe_policy __rcu *ipe_active_policy;
+extern bool success_audit;
 
 struct ipe_eval_ctx {
 	enum ipe_op_type op;
@@ -22,6 +23,13 @@  struct ipe_eval_ctx {
 	bool from_init_sb;
 };
 
+enum ipe_match {
+	IPE_MATCH_RULE = 0,
+	IPE_MATCH_TABLE,
+	IPE_MATCH_GLOBAL,
+	__IPE_MATCH_MAX
+};
+
 void build_eval_ctx(struct ipe_eval_ctx *ctx, const struct file *file, enum ipe_op_type op);
 int ipe_evaluate_event(const struct ipe_eval_ctx *const ctx);
 void ipe_invalidate_pinned_sb(const struct super_block *mnt_sb);
diff --git a/security/ipe/fs.c b/security/ipe/fs.c
index 522162af741a..dda7a5afc60c 100644
--- a/security/ipe/fs.c
+++ b/security/ipe/fs.c
@@ -8,11 +8,64 @@ 
 
 #include "ipe.h"
 #include "fs.h"
+#include "eval.h"
 #include "policy.h"
+#include "audit.h"
 
 static struct dentry *np __ro_after_init;
 static struct dentry *root __ro_after_init;
 struct dentry *policy_root __ro_after_init;
+static struct dentry *audit_node __ro_after_init;
+
+/**
+ * setaudit - Write handler for the securityfs node, "ipe/success_audit"
+ * @f: Supplies a file structure representing the securityfs node.
+ * @data: Supplies a buffer passed to the write syscall.
+ * @len: Supplies the length of @data.
+ * @offset: unused.
+ *
+ * Return:
+ * * >0	- Success, Length of buffer written
+ * * <0	- Error
+ */
+static ssize_t setaudit(struct file *f, const char __user *data,
+			size_t len, loff_t *offset)
+{
+	int rc = 0;
+	bool value;
+
+	if (!file_ns_capable(f, &init_user_ns, CAP_MAC_ADMIN))
+		return -EPERM;
+
+	rc = kstrtobool_from_user(data, len, &value);
+	if (rc)
+		return rc;
+
+	WRITE_ONCE(success_audit, value);
+
+	return len;
+}
+
+/**
+ * getaudit - Read handler for the securityfs node, "ipe/success_audit"
+ * @f: Supplies a file structure representing the securityfs node.
+ * @data: Supplies a buffer passed to the read syscall.
+ * @len: Supplies the length of @data.
+ * @offset: unused.
+ *
+ * Return:
+ * * >0	- Success, Length of buffer written
+ * * <0	- Error
+ */
+static ssize_t getaudit(struct file *f, char __user *data,
+			size_t len, loff_t *offset)
+{
+	const char *result;
+
+	result = ((READ_ONCE(success_audit)) ? "1" : "0");
+
+	return simple_read_from_buffer(data, len, offset, result, 1);
+}
 
 /**
  * new_policy - Write handler for the securityfs node, "ipe/new_policy".
@@ -46,6 +99,10 @@  static ssize_t new_policy(struct file *f, const char __user *data,
 	}
 
 	rc = ipe_new_policyfs_node(p);
+	if (rc)
+		goto out;
+
+	ipe_audit_policy_load(p);
 
 out:
 	if (rc < 0 && !IS_ERR(p))
@@ -58,6 +115,11 @@  static const struct file_operations np_fops = {
 	.write = new_policy,
 };
 
+static const struct file_operations audit_fops = {
+	.write = setaudit,
+	.read = getaudit,
+};
+
 /**
  * ipe_init_securityfs - Initialize IPE's securityfs tree at fsinit.
  *
@@ -78,6 +140,13 @@  static int __init ipe_init_securityfs(void)
 		goto err;
 	}
 
+	audit_node = securityfs_create_file("success_audit", 0600, root,
+					    NULL, &audit_fops);
+	if (IS_ERR(audit_node)) {
+		rc = PTR_ERR(audit_node);
+		goto err;
+	}
+
 	policy_root = securityfs_create_dir("policies", root);
 	if (IS_ERR(policy_root)) {
 		rc = PTR_ERR(policy_root);
@@ -94,6 +163,7 @@  static int __init ipe_init_securityfs(void)
 err:
 	securityfs_remove(np);
 	securityfs_remove(policy_root);
+	securityfs_remove(audit_node);
 	securityfs_remove(root);
 	return rc;
 }
diff --git a/security/ipe/policy.c b/security/ipe/policy.c
index 33bbc43f0d6f..7a0729246bbd 100644
--- a/security/ipe/policy.c
+++ b/security/ipe/policy.c
@@ -11,6 +11,7 @@ 
 #include "fs.h"
 #include "policy.h"
 #include "policy_parser.h"
+#include "audit.h"
 
 /* lock for synchronizing writers across ipe policy */
 DEFINE_MUTEX(ipe_policy_lock);
@@ -124,6 +125,8 @@  struct ipe_policy *ipe_update_policy(struct inode *root,
 
 	swap(new->policyfs, old->policyfs);
 
+	ipe_audit_policy_load(new);
+
 	return old;
 err:
 	ipe_free_policy(new);
@@ -209,5 +212,7 @@  int ipe_set_active_pol(const struct ipe_policy *p)
 
 	rcu_assign_pointer(ipe_active_policy, p);
 
+	ipe_audit_policy_activation(ap, p);
+
 	return 0;
 }