@@ -144,4 +144,11 @@ static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
}
#endif
+#if LINUX_VERSION_IN_RANGE(4,6,0, 4,11,0)
+extern int mii_ethtool_get_link_ksettings(
+ struct mii_if_info *mii, struct ethtool_link_ksettings *cmd);
+extern int mii_ethtool_set_link_ksettings(
+ struct mii_if_info *mii, const struct ethtool_link_ksettings *cmd);
+#endif /* LINUX_VERSION_IN_RANGE(4,6,0, 4,11,0) */
+
#endif /* __BACKPORT_LINUX_MII_H */
@@ -35,6 +35,7 @@ compat-$(CPTCFG_KERNEL_4_5) += backport-4.5.o
compat-$(CPTCFG_KERNEL_4_6) += backport-4.6.o
compat-$(CPTCFG_KERNEL_4_7) += backport-4.7.o
compat-$(CPTCFG_KERNEL_4_8) += backport-4.8.o
+compat-$(CPTCFG_KERNEL_4_10) += backport-4.10.o
compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o
compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o
new file mode 100644
@@ -0,0 +1,223 @@
+/*
+ * Copyright(c) 2017 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Backport functionality introduced in Linux 4.10.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+#if LINUX_VERSION_IS_GEQ(4,6,0)
+static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
+{
+ int advert;
+
+ advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
+
+ return mii_lpa_to_ethtool_lpa_t(advert);
+}
+
+/**
+ * mii_ethtool_set_link_ksettings - set settings that are specified in @cmd
+ * @mii: MII interfaces
+ * @cmd: requested ethtool_link_ksettings
+ *
+ * Returns 0 for success, negative on error.
+ */
+int mii_ethtool_set_link_ksettings(struct mii_if_info *mii,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct net_device *dev = mii->dev;
+ u32 speed = cmd->base.speed;
+
+ if (speed != SPEED_10 &&
+ speed != SPEED_100 &&
+ speed != SPEED_1000)
+ return -EINVAL;
+ if (cmd->base.duplex != DUPLEX_HALF && cmd->base.duplex != DUPLEX_FULL)
+ return -EINVAL;
+ if (cmd->base.port != PORT_MII)
+ return -EINVAL;
+ if (cmd->base.phy_address != mii->phy_id)
+ return -EINVAL;
+ if (cmd->base.autoneg != AUTONEG_DISABLE &&
+ cmd->base.autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ if ((speed == SPEED_1000) && (!mii->supports_gmii))
+ return -EINVAL;
+
+ /* ignore supported, maxtxpkt, maxrxpkt */
+
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
+ u32 bmcr, advert, tmp;
+ u32 advert2 = 0, tmp2 = 0;
+ u32 advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(
+ &advertising, cmd->link_modes.advertising);
+
+ if ((advertising & (ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full)) == 0)
+ return -EINVAL;
+
+ /* advertise only what has been requested */
+ advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
+ tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (mii->supports_gmii) {
+ advert2 = mii->mdio_read(dev, mii->phy_id,
+ MII_CTRL1000);
+ tmp2 = advert2 &
+ ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+ }
+ tmp |= ethtool_adv_to_mii_adv_t(advertising);
+
+ if (mii->supports_gmii)
+ tmp2 |= ethtool_adv_to_mii_ctrl1000_t(advertising);
+ if (advert != tmp) {
+ mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
+ mii->advertising = tmp;
+ }
+ if ((mii->supports_gmii) && (advert2 != tmp2))
+ mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
+
+ /* turn on autonegotiation, and force a renegotiate */
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
+
+ mii->force_media = 0;
+ } else {
+ u32 bmcr, tmp;
+
+ /* turn off auto negotiation, set speed and duplexity */
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
+ BMCR_SPEED1000 | BMCR_FULLDPLX);
+ if (speed == SPEED_1000)
+ tmp |= BMCR_SPEED1000;
+ else if (speed == SPEED_100)
+ tmp |= BMCR_SPEED100;
+ if (cmd->base.duplex == DUPLEX_FULL) {
+ tmp |= BMCR_FULLDPLX;
+ mii->full_duplex = 1;
+ } else {
+ mii->full_duplex = 0;
+ }
+ if (bmcr != tmp)
+ mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
+
+ mii->force_media = 1;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(mii_ethtool_set_link_ksettings);
+
+
+/**
+ * mii_ethtool_get_link_ksettings - get settings that are specified in @cmd
+ * @mii: MII interface
+ * @cmd: requested ethtool_link_ksettings
+ *
+ * The @cmd parameter is expected to have been cleared before calling
+ * mii_ethtool_get_link_ksettings().
+ *
+ * Returns 0 for success, negative on error.
+ */
+int mii_ethtool_get_link_ksettings(struct mii_if_info *mii,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct net_device *dev = mii->dev;
+ u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
+ u32 nego, supported, advertising, lp_advertising;
+
+ supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
+ if (mii->supports_gmii)
+ supported |= SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full;
+
+ /* only supports twisted-pair */
+ cmd->base.port = PORT_MII;
+
+ /* this isn't fully supported at higher layers */
+ cmd->base.phy_address = mii->phy_id;
+ cmd->base.mdio_support = ETH_MDIO_SUPPORTS_C22;
+
+ advertising = ADVERTISED_TP | ADVERTISED_MII;
+
+ bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
+ bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
+ if (mii->supports_gmii) {
+ ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
+ stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
+ }
+ if (bmcr & BMCR_ANENABLE) {
+ advertising |= ADVERTISED_Autoneg;
+ cmd->base.autoneg = AUTONEG_ENABLE;
+
+ advertising |= mii_get_an(mii, MII_ADVERTISE);
+ if (mii->supports_gmii)
+ advertising |= mii_ctrl1000_to_ethtool_adv_t(ctrl1000);
+
+ if (bmsr & BMSR_ANEGCOMPLETE) {
+ lp_advertising = mii_get_an(mii, MII_LPA);
+ lp_advertising |=
+ mii_stat1000_to_ethtool_lpa_t(stat1000);
+ } else {
+ lp_advertising = 0;
+ }
+
+ nego = advertising & lp_advertising;
+
+ if (nego & (ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseT_Half)) {
+ cmd->base.speed = SPEED_1000;
+ cmd->base.duplex = !!(nego & ADVERTISED_1000baseT_Full);
+ } else if (nego & (ADVERTISED_100baseT_Full |
+ ADVERTISED_100baseT_Half)) {
+ cmd->base.speed = SPEED_100;
+ cmd->base.duplex = !!(nego & ADVERTISED_100baseT_Full);
+ } else {
+ cmd->base.speed = SPEED_10;
+ cmd->base.duplex = !!(nego & ADVERTISED_10baseT_Full);
+ }
+ } else {
+ cmd->base.autoneg = AUTONEG_DISABLE;
+
+ cmd->base.speed = ((bmcr & BMCR_SPEED1000 &&
+ (bmcr & BMCR_SPEED100) == 0) ?
+ SPEED_1000 :
+ ((bmcr & BMCR_SPEED100) ?
+ SPEED_100 : SPEED_10));
+ cmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+
+ lp_advertising = 0;
+ }
+
+ mii->full_duplex = cmd->base.duplex;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising,
+ lp_advertising);
+
+ /* ignore maxtxpkt, maxrxpkt for now */
+
+ return 0;
+}
+EXPORT_SYMBOL(mii_ethtool_get_link_ksettings);
+#endif /* LINUX_VERSION_IS_GEQ(4,6,0) */
@@ -153,3 +153,7 @@ LIBERTAS 4.3
# some prototypes changed - might be fixable but I'm lazy
NFC_WILINK 4.8
+
+# struct ethtool_link_ksettings is missing, I'm lazy
+USB_USBNET 4.6
+USB_NET_RNDIS_WLAN 4.6
This function was added in kernel 4.10 and is needed by the usbnet drivers. These functions were added in upstream commit: bc8ee596afe8f3 ("net: mii: add generic function to support ksetting support") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- backport/backport-include/linux/mii.h | 7 ++ backport/compat/Makefile | 1 + backport/compat/backport-4.10.c | 223 ++++++++++++++++++++++++++++++++++ dependencies | 4 + 4 files changed, 235 insertions(+) create mode 100644 backport/compat/backport-4.10.c