mbox series

[Bluez,v4,0/4] adapter: Reconnect audio when resuming from suspend

Message ID 20200911223037.4127188-1-abhishekpandit@chromium.org (mailing list archive)
Headers show
Series adapter: Reconnect audio when resuming from suspend | expand

Message

Abhishek Pandit-Subedi Sept. 11, 2020, 10:30 p.m. UTC
Hi Luiz and Marcel,

This is a quality of life improvement for the behavior of audio devices
during system suspend. This depends on a kernel change that emits
suspend/resume events:

https://patchwork.kernel.org/project/bluetooth/list/?series=325771

Right now, audio devices will be disconnected as part of suspend but
won't be reconnected when the system resumes without user interaction.
This is annoying to some users as it causes an interruption to their
normal work flow.

This change reconnects audio devices that were disconnected for suspend
using the following logic:

 * In the device disconnect callback, mark any devices with the A2DP
   service uuid for reconnect. The reconnect will not be queued until
   resume.
 * In the controller resume callback, queue any policy items that are
   marked to reconnect on resume for connection with the ResumeDelay
   value (default = 2s).

A reconnect is queued after the controller resumes and the delay
between resume and reconnect is configurable via the ResumeDelay key in
the Policy settings. The 2s delay was chosen arbitrarily and I think
anywhere up to 10s is probably ok. A longer delay is better to account
for spurious wakeups and Wi-Fi reconnection time (avoiding any co-ex
issues) at the downside of reconnection speed.

Here are the tests I have done with this:
- Single suspend and verified the headphones reconnect
- Suspend stress test for 25 iterations and verify both Wi-Fi and
  Bluetooth audio reconnect on resume. (Ran with wake minimum time of
  10s)
- Suspend test with wake time = 1s to verify that BT reconnect isn't
  attempted. Ran 5 iterations with low wake time and then let it stay
  awake to confirm reconnect finally completed on last resume.
- Suspend test with wake time between 1s - 4s. Ran with 5 iterations and
  verified it connected several times in the middle and finally at the
  end.

I've tested this on a Pixelbook Go (AC-9260 controller) and HP
Chromebook 14a (RTL8822CE controller) with GID6B headset.

I've also tested this with the Pixel Buds 2. These earbuds actually
reconnect automatically to the Chromebook (even without this policy
change) and I verified that the new changes don't break the reconnection
mechanism.

Thanks
Abhishek


Changes in v4:
- Set reconnect timer in disconnect if resume events aren't supported
- Only set reconnect timer if adapter matches current notification
- Refactor changes in src/adapter to its own commit
- Refactor enabling A2DP_SINK_UUID into its own commit

Changes in v3:
- Refactored resume notification to use btd_adapter_driver
- Renamed ReconnectAudioDelay to ResumeDelay and set default to 2
- Added A2DP_SINK_UUID to default reconnect list

Changes in v2:
- Refactored to use policy instead of connecting directly in adapter

Abhishek Pandit-Subedi (4):
  adapter: Refactor kernel feature globals
  adapter: Handle controller resume and notify drivers
  policy: Enable reconnect for a2dp-sink in defaults
  policy: Reconnect audio on controller resume

 plugins/policy.c |  87 +++++++++++++++++++++++++++++++++-------
 src/adapter.c    | 102 +++++++++++++++++++++++++++++++++--------------
 src/adapter.h    |  11 +++++
 src/main.c       |   1 +
 src/main.conf    |  11 ++++-
 5 files changed, 168 insertions(+), 44 deletions(-)