From patchwork Fri Feb 16 20:31:57 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13560585 Received: from mail-wm1-f41.google.com (mail-wm1-f41.google.com [209.85.128.41]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 99B161EA90 for ; Fri, 16 Feb 2024 20:33:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.41 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708115596; cv=none; b=TOhXODtq6C5/3hF20/alSdcQLq8dpbBkJsIGFAwT+Bd9+szJt3mddNAIkwbav/Qz4LJlwA53pwdjdAXrYDZZ15FRAfyix86i3EU26TtwZlPVyqINuWtR48vrFFt15E2jP4fI/55Z4gAppBdX8JA36xOyUDT8zrAm+j1FcFEdQoY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1708115596; c=relaxed/simple; bh=3I4CXuk/WeEk7ajjH2UJMRZxlJ3vRUGIIjnrNU23YiU=; h=From:To:Cc:Subject:Date:Message-Id:MIME-Version; b=O3aqpdsuBWssL6j82wFj3cKcEjVFv5kLg/e8wwUVcjs0wc1NDzoINJ4sTx7aNpwfb82chq8cZsgqUY8X5NHgxnyHFHD/SZmTnaky8nYEpGYcxyvKqu2u/UOQKarXDBA7BoslX0q6kPWe1+OHj9LOXmU8nzPC0MnobNnKugMXKwk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=bgdev.pl; spf=none smtp.mailfrom=bgdev.pl; dkim=pass (2048-bit key) header.d=bgdev-pl.20230601.gappssmtp.com header.i=@bgdev-pl.20230601.gappssmtp.com header.b=SvLKzJB9; arc=none smtp.client-ip=209.85.128.41 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=bgdev.pl Authentication-Results: smtp.subspace.kernel.org; spf=none smtp.mailfrom=bgdev.pl Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bgdev-pl.20230601.gappssmtp.com header.i=@bgdev-pl.20230601.gappssmtp.com header.b="SvLKzJB9" Received: by mail-wm1-f41.google.com with SMTP id 5b1f17b1804b1-41232741dc4so7626725e9.3 for ; Fri, 16 Feb 2024 12:33:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20230601.gappssmtp.com; s=20230601; t=1708115591; x=1708720391; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=du2HpBcnUVrMPAnFXWJbJn5zTDGPtwpWkU7k3T+cHvo=; b=SvLKzJB9VJXgKfrQ9ytONVfFAJaAI6+CwMZQXYEwsfjO2w64AwaodUagZLUBaXIkL1 HX3iPF3F670KseCCya9cq19NuzDlOnxlIgk+6hj3mRLXKRP5wYGg5HZvLf4NIYa3WXO6 y9pbmZCFHR5iDxFMfIDqXq5n7it2SA6wcdTqECZK5BmCiHXX8dt/fyZjvDKzyfbSsFfh hOLY6J+d9mcJfKWdanfLk22kZgKfmbh3I4dOcOawiJiNt+joUIM9gbSzqe7pjboM0iks hoBrP7WtegzaMUrFia/BIvi3LhMBPf4Nt8CsxoFsn6SgyQGpQ3WkWLZsVV2bfihKnoZl GPrw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1708115591; x=1708720391; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=du2HpBcnUVrMPAnFXWJbJn5zTDGPtwpWkU7k3T+cHvo=; b=XchPcqX12aPY5Pbn5ie30aG5/+ud/0nyvdypsIgHy95llFDlj6Hzv3Yw7t1/P0DMw/ nIYrr0f0i8SBQbY6UnkFtYj95igLVu8Cwo6BQ/KjxkK74GYHMSGA6e15rW/abXujawtN IPz8EAGFmX/TyTVI/45Y/B5zDLfubv1+bssJmWmv8ocpkwyoKhu6oWV4WoypRtIy5/3U odqJFIXemSJ1wIGpg7X+IbdJ9vLfu9kLTwu4CgLRhcOzX8sKwkDJTuAseSrubNGD6TpU RbhggL9+6IkvMgnnrrTfv1+n3+qtEZRKlconYlG876aifWFYsllnDOULcD7bMipABL94 pzGA== X-Gm-Message-State: AOJu0Yw1UYya2i5Y+Z7MW3pwClqKTv8JWl6xQnCWaEZYr0eC1RwmzXMT pbS+v2+CuXaOhRLxB5rpFbju0wv5OQTUWdSJz39eITzVNZ43e1C0tYaYEYa3ppw= X-Google-Smtp-Source: AGHT+IGzTzleiYxNF4Ad09b1VW2/cZN7zSuS7wcp/+RcNzsR+sQhZvtX/87uodOmQzIiZdILeyK85w== X-Received: by 2002:a05:600c:1553:b0:412:a6b:f3a5 with SMTP id f19-20020a05600c155300b004120a6bf3a5mr4630389wmg.5.1708115590619; Fri, 16 Feb 2024 12:33:10 -0800 (PST) Received: from brgl-uxlite.home ([2a01:cb1d:334:ac00:7758:12d:16:5f19]) by smtp.gmail.com with ESMTPSA id m5-20020a05600c4f4500b0041253d0acd6sm1420528wmq.47.2024.02.16.12.33.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 16 Feb 2024 12:33:10 -0800 (PST) From: Bartosz Golaszewski To: Marcel Holtmann , Luiz Augusto von Dentz , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Kalle Valo , Bjorn Andersson , Konrad Dybcio , Liam Girdwood , Mark Brown , Catalin Marinas , Will Deacon , Bjorn Helgaas , Bartosz Golaszewski , Saravana Kannan , Geert Uytterhoeven , Arnd Bergmann , Neil Armstrong , Marek Szyprowski , Alex Elder , Srini Kandagatla , Greg Kroah-Hartman , Abel Vesa , Manivannan Sadhasivam , Lukas Wunner , Dmitry Baryshkov Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org, linux-pm@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH v5 00/18] power: sequencing: implement the subsystem and add first users Date: Fri, 16 Feb 2024 21:31:57 +0100 Message-Id: <20240216203215.40870-1-brgl@bgdev.pl> X-Mailer: git-send-email 2.40.1 Precedence: bulk X-Mailing-List: linux-bluetooth@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 From: Bartosz Golaszewski First, I'd like to apologize for the somewhat chaotic previous iterations of this series and improper versioning which was rightfully pointed out to me. I figured that the scope changed so much that it didn't make sense to consider previous submissions part of the same series as the original RFC but others thought otherwise so this one becomes v5 and I'll keep the versioning going forward. This is the summary of the work so far: v1: Original RFC: https://lore.kernel.org/lkml/20240104130123.37115-1-brgl@bgdev.pl/T/ v2: First real patch series (should have been PATCH v2) adding what I referred to back then as PCI power sequencing: https://lore.kernel.org/linux-arm-kernel/2024021413-grumbling-unlivable-c145@gregkh/T/ v3: RFC for the DT representation of the PMU supplying the WLAN and BT modules inside the QCA6391 package (was largely separate from the series but probably should have been called PATCH or RFC v3): https://lore.kernel.org/all/CAMRc=Mc+GNoi57eTQg71DXkQKjdaoAmCpB=h2ndEpGnmdhVV-Q@mail.gmail.com/T/ v4: Second attempt at the full series with changed scope (introduction of the pwrseq subsystem, should have been RFC v4) https://lore.kernel.org/lkml/20240201155532.49707-1-brgl@bgdev.pl/T/ === With that out of the way, I'd like to get down to explaining the two problems I'm trying to solve. Problem statement #1: Dynamic bus chicken-and-egg problem. Certain on-board PCI devices need to be powered up before they are can be detected but their PCI drivers won't get bound until the device is powered-up so enabling the relevant resources in the PCI device driver itself is impossible. Problem statement #2: Sharing inter-dependent resources between devices. Certain devices that use separate drivers (often on different busses) share resources (regulators, clocks, etc.). Typically these resources are reference-counted but in some cases there are additional interactions between them to consider, for example specific power-up sequence timings. === The reason for tackling both of these problems in a single series is the fact the the platform I'm working on - Qualcomm RB5 - deals with both and both need to be addressed in order to enable WLAN and Bluetooth support upstream. The on-board WLAN/BT package - QCA6391 - has a Power Management Unit that takes inputs from the host and exposes LDO outputs consumed by the BT and WLAN modules which can be powered-up and down independently. However a delay of 100ms must be respected between enabling the BT- and WLAN-enable GPIOs[*]. === This series is logically split into several sections. I'll go patch-by-patch and explain each step. Patch 1/18: This is a commit taken from the list by Jonathan Cameron that adds a __free() helper for OF nodes. Not strictly related to the series but until said commit ends in next, I need to carry it with this series. Patch 2/18: This enables the ath12k PCI module in arm64 defconfig as Qualcomm sm8650 and sm8550 reference platforms use it in the WCN7850 module. Patches 3/18-6/18: These contain all relevant DT bindings changes. We add new documents for the QCA6390 PMU and ATH12K devices as well as extend the bindings for the Qualcomm Bluetooth and ATH11K modules with regulators used by them in QCA6390. Patches 7/18-9/18: These contain changes to device-tree sources for the three platforms we work with in this series. As the WCN7850 module doesn't require any specific timings introducing dependencies between the Bluetooth and WLAN modules, while the QCA6390 does, we take two different approaches to how me model them in DT. For WCN7850 we hide the existence of the PMU as modeling it is simply not necessary. The BT and WLAN devices on the device-tree are represented as consuming the inputs (relevant to the functionality of each) of the PMU directly. For QCA6390 on RB5 we add the PMU node as a platform device. It consumes regulators and GPIOs from the host and exposed regulators consumer in turn by the BT and WLAN modules. This represents the internal structure of the package. Patches 10/18-14/18: These contain the bulk of the PCI changes for this series. We introduce a simple framework for powering up PCI devices before detecting them on the bus and the first user of this library in the form of the WCN7850 PCI power control driver. The general approach is as follows: PCI devices that need special treatment before they can be powered up, scanned and bound to their PCI drivers must be described on the device-tree as child nodes of the PCI port node. These devices will be instantiated on the platform bus. They will in fact be generic platform devices with the compatible of the form used for PCI devices already upstream ("pci,). We add a new directory under drivers/pci/pwrctl/ that contains PCI pwrctl drivers. These drivers are platform drivers that will now be matched against the devices instantiated from port children just like any other platform pairs. Both the power control platform device *AND* the associated PCI device reuse the same OF node and have access to the same properties. The goal of the platform driver is to request and bring up any required resources and let the pwrctl framework know that it's now OK to rescan the bus and detect the devices. When the device is bound, we are notified about it by the PCI bus notifier event and can establish a device link between the power control device and the PCI device so that any future extension for power-management will already be able to work with the correct hierachy. The reusing of the OF node is the reason for the small changes to the PCI OF core: as the bootloader can possibly leave the relevant regulators on before booting linux, the PCI device can be detected before its platform abstraction is probed. In this case, we find that device first and mark its OF node as reused. The pwrctl framework handles the opposite case (when the PCI device is detected only after the platform driver successfully enabled it). Patches 15/18-16/18: These add a relatively simple power sequencing subsystem and the first driver using it: the pwrseq module for the QCA6390 PMU. For the record: Bjorn suggested a different solution: a regulator driver that would - based on which regulators are enabled by a consumer - enable relevant resources (drive the enable GPIOs) while respecting the HW-specific delays. This would however require significant and yet unprecised changed to the regulator subsystem as well as be an abuse of the regulator provider API akin to using the reset framework for power sequencing as proposed before. Instead I'm proposing to add a subsystem that allows different devices to use a shared power sequence split into consumer-specific as well as common "units". A power sequence provider driver registers a set of units with pwrseq core. Each unit can be enabled and disabled and contains an optional list of other units which must be enabled before it itself can be. A unit represents a discreet chunk of the power sequence. It also registers a list of targets: a target is an abstraction wrapping a unit which allows consumers to tell pwrseq which unit they want to reach. Real-life example is the driver we're adding here: there's a set of common regulators, two PCIe-specific ones and two enable GPIOs: one for Bluetooth and one for WLAN. The Bluetooth driver requests a descriptor to the power sequencer and names the target it wants to reach: pwrseq = devm_pwrseq_get(dev, "bluetooth"); The pwrseq core then knows that when the driver calls: pwrseq_power_on(pwrseq); It must enable the "bluetooth-enable" unit but it depends on the "regulators-common" unit so this one is enabled first. The provider driver is also in charge of assuring an appropriate delay between enabling the BT and WLAN enable GPIOs. The WLAN-specific resources are handled by the "wlan-enable" unit and so are not enabled until the WLAN driver requests the "wlan" target to be powered on. Another thing worth discussing is the way we associate the consumer with the relevant power sequencer. DT maintainers have expressed a discontent with the existing mmc pwrseq bindings and have NAKed an earlier initiative to introduce global pwrseq bindings to the kernel[1]. In this approach, we model the existing regulators and GPIOs in DT but the pwrseq subsystem requires each provider to provide a .match() callback. Whenever a consumer requests a power sequencer handle, we iterate over the list of pwrseq drivers and call .match() for each. It's up to the driver to verify in a platform-specific way whether it deals with its consumer and let the core pwrseq code know. The advantage of this over reusing the regulator or reset subsystem is that it's more generalized and can handle resources of all kinds as well as deal with any kind of power-on sequences: for instance, Qualcomm has a PCI switch they want a driver for but this switch requires enabling some resources first (PCI pwrctl) and then configuring the device over I2C (which can be handled by the pwrseq provider). Patch 17/18: This patch makes the Qualcomm Bluetooth driver get and use the power sequencer for QCA6390. Patch 18/18: While tiny, this patch is possibly the highlight of the entire series. It uses the two abstraction layers we introduced before to create an elegant power sequencing PCI power control driver and supports the ath11k module on QCA6390. With this series we can now enable BT and WLAN on several new Qualcomm boards upstream. I tested the series on RB5 while Neil tested it on sm8650-qrd and sm8550-qrd. Best Regards, Bartosz Golaszewski It's hard to list the changes between versions here as the scope changed significantly between each iteration and some versions were not even full series but rather RFCs for parts of the solution. For this reason, I'll only start listing changes starting from v6. [*] This is what the docs say. In practice it seems that this delay can be ignored. However the subsequent model - QCA6490 - *does* require users to respect it, so the problem remains valid. [1] https://lore.kernel.org/netdev/20210829131305.534417-1-dmitry.baryshkov@linaro.org/ Bartosz Golaszewski (15): arm64: defconfig: enable ath12k as a module dt-bindings: regulator: describe the PMU module of the QCA6390 package dt-bindings: net: bluetooth: qualcomm: describe regulators for QCA6390 dt-bindings: new: wireless: qcom,ath11k: describe the ath11k on QCA6390 dt-bindings: new: wireless: describe the ath12k PCI module arm64: dts: qcom: qrb5165-rb5: model the PMU of the QCA6391 PCI: hold the rescan mutex when scanning for the first time PCI/pwrctl: reuse the OF node for power controlled devices PCI/pwrctl: create platform devices for child OF nodes of the port node PCI/pwrctl: add PCI power control core code PCI/pwrctl: add a power control driver for WCN7850 power: sequencing: implement the pwrseq core power: pwrseq: add a driver for the QCA6390 PMU module Bluetooth: qca: use the power sequencer for QCA6390 PCI/pwrctl: add a PCI power control driver for power sequenced devices Jonathan Cameron (1): of: Add cleanup.h based auto release via __free(device_node) markings. Neil Armstrong (2): arm64: dts: qcom: sm8550-qrd: add the Wifi node arm64: dts: qcom: sm8650-qrd: add the Wifi node .../net/bluetooth/qualcomm-bluetooth.yaml | 17 + .../net/wireless/qcom,ath11k-pci.yaml | 28 + .../net/wireless/qcom,ath12k-pci.yaml | 103 ++ .../bindings/regulator/qcom,qca6390-pmu.yaml | 166 +++ MAINTAINERS | 8 + arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 123 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 + arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 37 + arch/arm64/boot/dts/qcom/sm8550.dtsi | 10 + arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 29 + arch/arm64/boot/dts/qcom/sm8650.dtsi | 10 + arch/arm64/configs/defconfig | 1 + drivers/bluetooth/hci_qca.c | 31 + drivers/pci/Kconfig | 1 + drivers/pci/Makefile | 1 + drivers/pci/bus.c | 9 +- drivers/pci/of.c | 14 +- drivers/pci/probe.c | 2 + drivers/pci/pwrctl/Kconfig | 25 + drivers/pci/pwrctl/Makefile | 7 + drivers/pci/pwrctl/core.c | 136 +++ drivers/pci/pwrctl/pci-pwrctl-pwrseq.c | 84 ++ drivers/pci/pwrctl/pci-pwrctl-wcn7850.c | 202 ++++ drivers/pci/remove.c | 2 + drivers/power/Kconfig | 1 + drivers/power/Makefile | 1 + drivers/power/sequencing/Kconfig | 28 + drivers/power/sequencing/Makefile | 6 + drivers/power/sequencing/core.c | 1065 +++++++++++++++++ drivers/power/sequencing/pwrseq-qca6390.c | 353 ++++++ include/linux/of.h | 2 + include/linux/pci-pwrctl.h | 51 + include/linux/pwrseq/consumer.h | 56 + include/linux/pwrseq/provider.h | 75 ++ 34 files changed, 2678 insertions(+), 16 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,ath12k-pci.yaml create mode 100644 Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml create mode 100644 drivers/pci/pwrctl/Kconfig create mode 100644 drivers/pci/pwrctl/Makefile create mode 100644 drivers/pci/pwrctl/core.c create mode 100644 drivers/pci/pwrctl/pci-pwrctl-pwrseq.c create mode 100644 drivers/pci/pwrctl/pci-pwrctl-wcn7850.c create mode 100644 drivers/power/sequencing/Kconfig create mode 100644 drivers/power/sequencing/Makefile create mode 100644 drivers/power/sequencing/core.c create mode 100644 drivers/power/sequencing/pwrseq-qca6390.c create mode 100644 include/linux/pci-pwrctl.h create mode 100644 include/linux/pwrseq/consumer.h create mode 100644 include/linux/pwrseq/provider.h Tested-by: Neil Armstrong # on SM8650-QRD Tested-by: Neil Armstrong # on SM8550-QRD Tested-by: Amit Pundir # On RB5 running AOSP