mbox series

[v2,0/3] Add support for Amlogic HCI UART

Message ID 20240718-btaml-v2-0-1392b2e21183@amlogic.com (mailing list archive)
Headers show
Series Add support for Amlogic HCI UART | expand

Message

Yang Li via B4 Relay July 18, 2024, 7:42 a.m. UTC 
Add support for Amlogic HCI UART, including dt-binding,
and Amlogic Bluetooth driver.

Signed-off-by: Yang Li <yang.li@amlogic.com>
---
Changes in v2:
- Introduce a regulator for powering up the Bluetooth chip instead of power sequencing.
- Use the GPIO Consumer API to manipulate the GPIO pins instead of the legacy API.
- Minor fixes.
- Link to v1: https://lore.kernel.org/r/20240705-btaml-v1-0-7f1538f98cef@amlogic.com

---
Yang Li (3):
      dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth
      Bluetooth: hci_uart: Add support for Amlogic HCI UART
      MAINTAINERS: Add an entry for Amlogic HCI UART (M: Yang Li)

 .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml  |  66 ++
 MAINTAINERS                                        |   7 +
 drivers/bluetooth/Kconfig                          |  12 +
 drivers/bluetooth/Makefile                         |   1 +
 drivers/bluetooth/hci_aml.c                        | 772 +++++++++++++++++++++
 drivers/bluetooth/hci_ldisc.c                      |   8 +-
 drivers/bluetooth/hci_uart.h                       |   8 +-
 7 files changed, 871 insertions(+), 3 deletions(-)
---
base-commit: 54dd4796336de8ce5cbf344db837f9b8448ebcf8
change-id: 20240418-btaml-f9d7b19724ab

Best regards,