diff mbox series

[v4,2/3] Bluetooth: btmtk: introduce btmtk reset work

Message ID 037a3ab699b7f545884b493c5ea5a4b7e7b667a8.1682549719.git.objelf@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v4,1/3] Bluetooth: btusb: mediatek: use readx_poll_timeout instead of open coding | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/CheckPatch success CheckPatch PASS
tedd_an/GitLint success Gitlint PASS
tedd_an/SubjectPrefix success Gitlint PASS
tedd_an/IncrementalBuild success Incremental Build PASS

Commit Message

Sean Wang April 26, 2023, 11:08 p.m. UTC
From: Jing Cai <jing.cai@mediatek.com>

Introduce btmtk_reset_work which can be called whenever the firmware abort,
HCI command timeout, other fatal error happen.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
---
v2, v3, v4: rebase onto the latest codebase
---
 drivers/bluetooth/btmtk.c |  16 ++++++
 drivers/bluetooth/btmtk.h |  14 +++++
 drivers/bluetooth/btusb.c | 106 ++++++++++++++++++++------------------
 3 files changed, 86 insertions(+), 50 deletions(-)

Comments

Luiz Augusto von Dentz April 27, 2023, 12:14 a.m. UTC | #1
Hi Sean,

On Wed, Apr 26, 2023 at 4:08 PM <sean.wang@mediatek.com> wrote:
>
> From: Jing Cai <jing.cai@mediatek.com>
>
> Introduce btmtk_reset_work which can be called whenever the firmware abort,
> HCI command timeout, other fatal error happen.
>
> Co-developed-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Jing Cai <jing.cai@mediatek.com>
> ---
> v2, v3, v4: rebase onto the latest codebase
> ---
>  drivers/bluetooth/btmtk.c |  16 ++++++
>  drivers/bluetooth/btmtk.h |  14 +++++
>  drivers/bluetooth/btusb.c | 106 ++++++++++++++++++++------------------
>  3 files changed, 86 insertions(+), 50 deletions(-)
>
> diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
> index 809762d64fc6..77df7b5c3ef3 100644
> --- a/drivers/bluetooth/btmtk.c
> +++ b/drivers/bluetooth/btmtk.c
> @@ -53,6 +53,8 @@ struct btmtk_section_map {
>         };
>  } __packed;
>
> +static struct btmtk_reset_work reset_work;
> +
>  int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
>                               wmt_cmd_sync_func_t wmt_cmd_sync)
>  {
> @@ -280,6 +282,20 @@ int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
>  }
>  EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
>
> +void btmtk_init_reset_work(struct hci_dev *hdev, work_func_t func)
> +{
> +       reset_work.hdev = hdev;
> +       INIT_WORK(&reset_work.work, func);
> +}
> +EXPORT_SYMBOL_GPL(btmtk_init_reset_work);
> +
> +void btmtk_reset_sync(struct hci_dev *hdev)
> +{
> +       schedule_work(&reset_work.work);
> +       flush_work(&reset_work.work);
> +}
> +EXPORT_SYMBOL_GPL(btmtk_reset_sync);

Lets stop assuming there is only one controller in the system, so
works like reset_work need to be store on a per hdev basis, not using
a global variable, also Im not sure why you would need dedicated work
for reset? Can't you use hci_cmd_sync_queue/hci_cmd_sync_submit?

>  MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
>  MODULE_AUTHOR("Mark Chen <mark-yw.chen@mediatek.com>");
>  MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
> diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
> index 2a88ea8e475e..22d39f637652 100644
> --- a/drivers/bluetooth/btmtk.h
> +++ b/drivers/bluetooth/btmtk.h
> @@ -119,6 +119,11 @@ struct btmtk_hci_wmt_params {
>         u32 *status;
>  };
>
> +struct btmtk_reset_work {
> +       struct hci_dev *hdev;
> +       struct work_struct work;
> +};
> +
>  typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
>                                    struct btmtk_hci_wmt_params *);
>
> @@ -131,6 +136,8 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
>
>  int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
>                          wmt_cmd_sync_func_t wmt_cmd_sync);
> +void btmtk_init_reset_work(struct hci_dev *hdev, work_func_t func);
> +void btmtk_reset_sync(struct hci_dev *hdev);
>  #else
>
>  static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
> @@ -151,4 +158,11 @@ static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
>         return -EOPNOTSUPP;
>  }
>
> +static void btmtk_init_reset_work(struct hci_dev *hdev, work_func_t func)
> +{
> +}
> +
> +static void btmtk_reset_sync(struct hci_dev *hdev)
> +{
> +}
>  #endif
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 275e0666503d..e84f1a8d03a3 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -2946,6 +2946,59 @@ static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
>         return val & MTK_BT_RST_DONE;
>  }
>
> +static void btusb_mtk_reset_work(struct work_struct *work)
> +{
> +       struct btmtk_reset_work *info = container_of(work,
> +                                                    struct btmtk_reset_work,
> +                                                    work);
> +       struct hci_dev *hdev = info->hdev;
> +       struct btusb_data *data = hci_get_drvdata(hdev);
> +       u32 val;
> +       int err;
> +
> +       /* It's MediaTek specific bluetooth reset mechanism via USB */
> +       if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
> +               bt_dev_err(hdev, "last reset failed? Not resetting again");
> +               return;
> +       }
> +
> +       err = usb_autopm_get_interface(data->intf);
> +       if (err < 0)
> +               return;
> +
> +       btusb_stop_traffic(data);
> +       usb_kill_anchored_urbs(&data->tx_anchor);
> +
> +       /* It's Device EndPoint Reset Option Register */
> +       bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
> +       btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
> +       btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
> +
> +       /* Reset the bluetooth chip via USB interface. */
> +       btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
> +       btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> +       btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> +       btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> +       btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> +       /* MT7921 need to delay 20ms between toggle reset bit */
> +       msleep(20);
> +       btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
> +       btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> +
> +       err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
> +                                val & MTK_BT_RST_DONE, 20000, 1000000);
> +       if (err < 0)
> +               bt_dev_err(hdev, "Reset timeout");
> +
> +       btusb_mtk_id_get(data, 0x70010200, &val);
> +       if (!val)
> +               bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
> +
> +       usb_queue_reset_device(data->intf);
> +
> +       clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
> +}
> +
>  static int btusb_mtk_setup(struct hci_dev *hdev)
>  {
>         struct btusb_data *data = hci_get_drvdata(hdev);
> @@ -2982,6 +3035,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
>                 }
>         }
>
> +       btmtk_init_reset_work(hdev, btusb_mtk_reset_work);
> +
>         switch (dev_id) {
>         case 0x7663:
>                 fwname = FIRMWARE_MT7663;
> @@ -3131,55 +3186,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
>         return 0;
>  }
>
> -static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
> -{
> -       struct btusb_data *data = hci_get_drvdata(hdev);
> -       u32 val;
> -       int err;
> -
> -       /* It's MediaTek specific bluetooth reset mechanism via USB */
> -       if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
> -               bt_dev_err(hdev, "last reset failed? Not resetting again");
> -               return;
> -       }
> -
> -       err = usb_autopm_get_interface(data->intf);
> -       if (err < 0)
> -               return;
> -
> -       btusb_stop_traffic(data);
> -       usb_kill_anchored_urbs(&data->tx_anchor);
> -
> -       /* It's Device EndPoint Reset Option Register */
> -       bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
> -       btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
> -       btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
> -
> -       /* Reset the bluetooth chip via USB interface. */
> -       btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
> -       btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> -       btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> -       btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> -       btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> -       /* MT7921 need to delay 20ms between toggle reset bit */
> -       msleep(20);
> -       btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
> -       btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> -
> -       err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
> -                                val & MTK_BT_RST_DONE, 20000, 1000000);
> -       if (err < 0)
> -               bt_dev_err(hdev, "Reset timeout");
> -
> -       btusb_mtk_id_get(data, 0x70010200, &val);
> -       if (!val)
> -               bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
> -
> -       usb_queue_reset_device(data->intf);
> -
> -       clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
> -}
> -
>  static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
>  {
>         struct btusb_data *data = hci_get_drvdata(hdev);
> @@ -4301,7 +4307,7 @@ static int btusb_probe(struct usb_interface *intf,
>                 hdev->setup = btusb_mtk_setup;
>                 hdev->shutdown = btusb_mtk_shutdown;
>                 hdev->manufacturer = 70;
> -               hdev->cmd_timeout = btusb_mtk_cmd_timeout;
> +               hdev->cmd_timeout = btmtk_reset_sync;
>                 hdev->set_bdaddr = btmtk_set_bdaddr;
>                 set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
>                 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 809762d64fc6..77df7b5c3ef3 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -53,6 +53,8 @@  struct btmtk_section_map {
 	};
 } __packed;
 
+static struct btmtk_reset_work reset_work;
+
 int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 			      wmt_cmd_sync_func_t wmt_cmd_sync)
 {
@@ -280,6 +282,20 @@  int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 }
 EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
 
+void btmtk_init_reset_work(struct hci_dev *hdev, work_func_t func)
+{
+	reset_work.hdev = hdev;
+	INIT_WORK(&reset_work.work, func);
+}
+EXPORT_SYMBOL_GPL(btmtk_init_reset_work);
+
+void btmtk_reset_sync(struct hci_dev *hdev)
+{
+	schedule_work(&reset_work.work);
+	flush_work(&reset_work.work);
+}
+EXPORT_SYMBOL_GPL(btmtk_reset_sync);
+
 MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
 MODULE_AUTHOR("Mark Chen <mark-yw.chen@mediatek.com>");
 MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index 2a88ea8e475e..22d39f637652 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -119,6 +119,11 @@  struct btmtk_hci_wmt_params {
 	u32 *status;
 };
 
+struct btmtk_reset_work {
+	struct hci_dev *hdev;
+	struct work_struct work;
+};
+
 typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
 				   struct btmtk_hci_wmt_params *);
 
@@ -131,6 +136,8 @@  int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
 
 int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
 			 wmt_cmd_sync_func_t wmt_cmd_sync);
+void btmtk_init_reset_work(struct hci_dev *hdev, work_func_t func);
+void btmtk_reset_sync(struct hci_dev *hdev);
 #else
 
 static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
@@ -151,4 +158,11 @@  static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
 	return -EOPNOTSUPP;
 }
 
+static void btmtk_init_reset_work(struct hci_dev *hdev, work_func_t func)
+{
+}
+
+static void btmtk_reset_sync(struct hci_dev *hdev)
+{
+}
 #endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 275e0666503d..e84f1a8d03a3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2946,6 +2946,59 @@  static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
 	return val & MTK_BT_RST_DONE;
 }
 
+static void btusb_mtk_reset_work(struct work_struct *work)
+{
+	struct btmtk_reset_work *info = container_of(work,
+						     struct btmtk_reset_work,
+						     work);
+	struct hci_dev *hdev = info->hdev;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u32 val;
+	int err;
+
+	/* It's MediaTek specific bluetooth reset mechanism via USB */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return;
+	}
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		return;
+
+	btusb_stop_traffic(data);
+	usb_kill_anchored_urbs(&data->tx_anchor);
+
+	/* It's Device EndPoint Reset Option Register */
+	bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
+	btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
+	btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
+
+	/* Reset the bluetooth chip via USB interface. */
+	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
+	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+	/* MT7921 need to delay 20ms between toggle reset bit */
+	msleep(20);
+	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
+	btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+
+	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+				 val & MTK_BT_RST_DONE, 20000, 1000000);
+	if (err < 0)
+		bt_dev_err(hdev, "Reset timeout");
+
+	btusb_mtk_id_get(data, 0x70010200, &val);
+	if (!val)
+		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
+
+	usb_queue_reset_device(data->intf);
+
+	clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
+}
+
 static int btusb_mtk_setup(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2982,6 +3035,8 @@  static int btusb_mtk_setup(struct hci_dev *hdev)
 		}
 	}
 
+	btmtk_init_reset_work(hdev, btusb_mtk_reset_work);
+
 	switch (dev_id) {
 	case 0x7663:
 		fwname = FIRMWARE_MT7663;
@@ -3131,55 +3186,6 @@  static int btusb_mtk_shutdown(struct hci_dev *hdev)
 	return 0;
 }
 
-static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
-{
-	struct btusb_data *data = hci_get_drvdata(hdev);
-	u32 val;
-	int err;
-
-	/* It's MediaTek specific bluetooth reset mechanism via USB */
-	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
-		bt_dev_err(hdev, "last reset failed? Not resetting again");
-		return;
-	}
-
-	err = usb_autopm_get_interface(data->intf);
-	if (err < 0)
-		return;
-
-	btusb_stop_traffic(data);
-	usb_kill_anchored_urbs(&data->tx_anchor);
-
-	/* It's Device EndPoint Reset Option Register */
-	bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
-	btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
-	btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
-
-	/* Reset the bluetooth chip via USB interface. */
-	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
-	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
-	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
-	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
-	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
-	/* MT7921 need to delay 20ms between toggle reset bit */
-	msleep(20);
-	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
-	btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
-
-	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
-				 val & MTK_BT_RST_DONE, 20000, 1000000);
-	if (err < 0)
-		bt_dev_err(hdev, "Reset timeout");
-
-	btusb_mtk_id_get(data, 0x70010200, &val);
-	if (!val)
-		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
-
-	usb_queue_reset_device(data->intf);
-
-	clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
-}
-
 static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -4301,7 +4307,7 @@  static int btusb_probe(struct usb_interface *intf,
 		hdev->setup = btusb_mtk_setup;
 		hdev->shutdown = btusb_mtk_shutdown;
 		hdev->manufacturer = 70;
-		hdev->cmd_timeout = btusb_mtk_cmd_timeout;
+		hdev->cmd_timeout = btmtk_reset_sync;
 		hdev->set_bdaddr = btmtk_set_bdaddr;
 		set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);