| Message ID | 20200425155531.2816584-3-alistair@alistair23.me (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Marcel Holtmann |
| Headers | show |
| Series | [v4,1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth | expand |
Hi Alistair, > The sopine board has an optional RTL8723BS WiFi + BT module that can be > connected to UART1. Add this to the device tree so that it will work > for users if connected. > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > .../allwinner/sun50i-a64-sopine-baseboard.dts | 29 +++++++++++++++++++ > 1 file changed, 29 insertions(+) so I am bit confused on what to do with this series? Do you want me to apply a subset of patches or do you require specific reviews or acks? Regards Marcel
Hi Marcel, On Tue, Apr 28, 2020 at 11:51:24AM +0200, Marcel Holtmann wrote: > Hi Alistair, > > > The sopine board has an optional RTL8723BS WiFi + BT module that can be > > connected to UART1. Add this to the device tree so that it will work > > for users if connected. > > > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > > --- > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 29 +++++++++++++++++++ > > 1 file changed, 29 insertions(+) > > so I am bit confused on what to do with this series? Do you want me to apply a > subset of patches or do you require specific reviews or acks? Applying 1 and 2 and leaving 3 aside would be great :) Thanks! Maxime
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 2f6ea9f3f6a2..34357ba143cb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -42,6 +42,11 @@ reg_vcc1v8: vcc1v8 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; }; &ac_power_supply { @@ -103,6 +108,17 @@ ext_rgmii_phy: ethernet-phy@1 { }; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo4>; + vqmmc-supply = <®_eldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + bus-width = <4>; + status = "okay"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; @@ -174,6 +190,19 @@ &uart0 { status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts = <1>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + }; +}; + /* On Pi-2 connector */ &uart2 { pinctrl-names = "default";
The sopine board has an optional RTL8723BS WiFi + BT module that can be connected to UART1. Add this to the device tree so that it will work for users if connected. Signed-off-by: Alistair Francis <alistair@alistair23.me> --- .../allwinner/sun50i-a64-sopine-baseboard.dts | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+)