diff mbox series

[BlueZ,v6] doc: Describe the new Advertisement Monitor support

Message ID 20200507145354.BlueZ.v6.1.If9f6be992cbaeaa35423de29da6db28675b35fcc@changeid (mailing list archive)
State Superseded
Headers show
Series [BlueZ,v6] doc: Describe the new Advertisement Monitor support | expand

Commit Message

Miao-chen Chou May 7, 2020, 9:54 p.m. UTC
This describes the following commands and event.
- Read Advertisement Monitor Features command
- Add Advertisement Patterns Monitor command
- Remove Advertisement Monitor command
- Advertisement Monitor Added event
- Advertisement Monitor Removed event
Note that the content of a monitor can differ based on its type. For now we
introduce only pattern-based monitor, so you may find that unlike the
command of removing monitor(s), the Add command is tied to a specific type.
---

Changes in v6:
- Refine the description of commands.
- Add Monitor_Handle as the return parameter of Remove Advertisement
Monitor command.

Changes in v5:
- Add more fields in the return value of Read Advertisement Monitor
Features command.
- Refine the description of commands and events.

Changes in v4:
- In Read Advertisement Monitor Features command, rename
Adopted_Features to Enabled_Features.

Changes in v3:
- Remove Advertisement Monitor can perform the removal of one monitor
or all monitors.
- Add Read Advertisement Monitor Features command.
- Add Advertisement Monitor Added event and dvertisement Monitor Removed
event.

Changes in v2:
- Combine commands to remove one monitor and remove all monitors. The
refined command takes multiple handles and an extra field to indicate
whether to remove all monitors.

 doc/mgmt-api.txt | 147 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

Comments

Miao-chen Chou May 18, 2020, 9:17 p.m. UTC | #1
Hi Marcel and Luiz,

Can you help with giving more comments if any?

Thanks,
Miao

On Thu, May 7, 2020 at 2:54 PM Miao-chen Chou <mcchou@chromium.org> wrote:
>
> This describes the following commands and event.
> - Read Advertisement Monitor Features command
> - Add Advertisement Patterns Monitor command
> - Remove Advertisement Monitor command
> - Advertisement Monitor Added event
> - Advertisement Monitor Removed event
> Note that the content of a monitor can differ based on its type. For now we
> introduce only pattern-based monitor, so you may find that unlike the
> command of removing monitor(s), the Add command is tied to a specific type.
> ---
>
> Changes in v6:
> - Refine the description of commands.
> - Add Monitor_Handle as the return parameter of Remove Advertisement
> Monitor command.
>
> Changes in v5:
> - Add more fields in the return value of Read Advertisement Monitor
> Features command.
> - Refine the description of commands and events.
>
> Changes in v4:
> - In Read Advertisement Monitor Features command, rename
> Adopted_Features to Enabled_Features.
>
> Changes in v3:
> - Remove Advertisement Monitor can perform the removal of one monitor
> or all monitors.
> - Add Read Advertisement Monitor Features command.
> - Add Advertisement Monitor Added event and dvertisement Monitor Removed
> event.
>
> Changes in v2:
> - Combine commands to remove one monitor and remove all monitors. The
> refined command takes multiple handles and an extra field to indicate
> whether to remove all monitors.
>
>  doc/mgmt-api.txt | 147 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 147 insertions(+)
>
> diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
> index 39f23c456..3290cc76f 100644
> --- a/doc/mgmt-api.txt
> +++ b/doc/mgmt-api.txt
> @@ -3138,6 +3138,125 @@ Read Security Information Command
>                                 Invalid Index
>
>
> +Read Advertisement Monitor Features Command
> +===========================================
> +
> +       Command Code:           0x0049
> +       Controller Index:       <controller id>
> +       Command Parameters:
> +       Return Parameters:      Supported_Features (4 Octets)
> +                               Enabled_Features (4 Octets)
> +                               Max_Num_Handles (2 Octets)
> +                               Max_Num_Patterns (1 Octet)
> +                               Num_Handles (2 Octets)
> +                               Handle1 (2 Octets)
> +                               Handle2 (2 Octets)
> +                               ...
> +
> +       This command is used to read the advertisement monitor features
> +       supported by the controller and stack. Supported_Features lists all
> +       related features supported by the controller while Enabled_Features
> +       lists the ones currently used by the kernel.
> +
> +       Supported_Features and Enabled_Features are bitmasks with currently
> +       the following available bits:
> +
> +               1       Advertisement content monitoring based on patterns with
> +                       logic OR.
> +
> +       Max_Num_Handles indicates the maximum number of supported
> +       advertisement monitors. Note that the actual number of supported
> +       ones might be less depending on the limitation of the controller.
> +
> +       Max_Num_Pattern indicates the maximum number of supported patterns
> +       in an advertisement patterns monitor. Note that the actual number
> +       of supported ones might be less depending on the limitation of the
> +       controller.
> +
> +       Num_Handles indicates the number of added advertisement monitors,
> +       and it is followed by a list of handles.
> +
> +       This command can be used when the controller is not powered.
> +
> +
> +Add Advertisement Patterns Monitor Command
> +=========================================
> +
> +       Command Code:           0x004A
> +       Controller Index:       <controller id>
> +       Command Parameters:     Pattern_Count (1 Octet)
> +                               Pattern1 {
> +                                       AD_Type (1 Octet)
> +                                       Offset (1 Octet)
> +                                       Length (1 Octet)
> +                                       Value (31 Octets)
> +                               }
> +                               Pattern2 { }
> +                               ...
> +       Return Parameters:      Monitor_Handle (2 Octets)
> +
> +       This command is used to add an advertisement monitor whose
> +       filtering conditions are patterns. The kernel will trigger scanning
> +       if there is at least one monitor added. If the controller supports
> +       advertisement filtering, the kernel would offload the content
> +       filtering to the controller in order to reduce power consumption;
> +       otherwise the kernel ignores the content of the monitor. Note that
> +       if the there are more than one patterns, OR logic would applied
> +       among patterns during filtering. In other words, any advertisement
> +       matching at least one pattern in a given monitor would be
> +       considered as a match.
> +
> +       A pattern contains the following fields.
> +               AD_Data_Type    Advertising Data Type. The possible values
> +                               are defined in Core Specification
> +                               Supplement.
> +               Offset          The start index where pattern matching
> +                               shall be performed with in the AD data.
> +               Length          The length of the pattern value in bytes.
> +               Value           The value of the pattern in bytes.
> +
> +       Here is an example of a pattern.
> +               {
> +                       0x16, // Service Data - 16-bit UUID
> +                       0x02, // Skip the UUID part.
> +                       0x04,
> +                       {0x11, 0x22, 0x33, 0x44},
> +               }
> +
> +       This command can be used when the controller is not powered and
> +       all settings will be programmed once powered.
> +
> +       Possible errors:        Failed
> +                               Busy
> +                               No Resources
> +                               Invalid Parameters
> +
> +
> +Remove Advertisement Monitor Command
> +====================================
> +
> +       Command Code:           0x004B
> +       Controller Index:       <controller id>
> +       Command Parameters:     Monitor_Handle (2 Octets)
> +       Return Parameters:      Monitor_Handle (2 Octets)
> +
> +       This command is used to remove advertisement monitor(s). The kernel
> +       would remove the monitor(s) with Monitor_Handle and update the LE
> +       scanning.
> +
> +       When the Monitor_Handle is set to zero, then all previously added
> +       handles will be removed.
> +
> +       Removing a monitor while it is being added will be ignored.
> +
> +       This command can be used when the controller is not powered and
> +       all settings will be programmed once powered.
> +
> +       Possible errors:        Failed
> +                               Busy
> +                               Invalid Index
> +
> +
>  Command Complete Event
>  ======================
>
> @@ -4020,3 +4139,31 @@ PHY Configuration Changed Event
>         one through which the change was triggered.
>
>         Refer Get PHY Configuration command for PHYs parameter.
> +
> +
> +Advertisement Monitor Added Event
> +=================================
> +
> +       Event Code:             0x0027
> +       Controller Index:       <controller id>
> +       Event Parameters:       Monitor_Handle (2 Octets)
> +
> +       This event indicates that an advertisement monitor has been added
> +       using the Add Advertisement Monitor command.
> +
> +       The event will only be sent to management sockets other than the
> +       one through which the command was sent.
> +
> +
> +Advertisement Monitor Removed Event
> +===================================
> +
> +       Event Code:             0x0028
> +       Controller Index:       <controller id>
> +       Event Parameters:       Monitor_Handle (2 Octets)
> +
> +       This event indicates that an advertisement monitor has been removed
> +       using the Remove Advertisement Monitor command.
> +
> +       The event will only be sent to management sockets other than the
> +       one through which the command was sent.
> --
> 2.24.1
>
diff mbox series

Patch

diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index 39f23c456..3290cc76f 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -3138,6 +3138,125 @@  Read Security Information Command
 				Invalid Index
 
 
+Read Advertisement Monitor Features Command
+===========================================
+
+	Command Code:		0x0049
+	Controller Index:	<controller id>
+	Command Parameters:
+	Return Parameters:	Supported_Features (4 Octets)
+				Enabled_Features (4 Octets)
+				Max_Num_Handles (2 Octets)
+				Max_Num_Patterns (1 Octet)
+				Num_Handles (2 Octets)
+				Handle1 (2 Octets)
+				Handle2 (2 Octets)
+				...
+
+	This command is used to read the advertisement monitor features
+	supported by the controller and stack. Supported_Features lists all
+	related features supported by the controller while Enabled_Features
+	lists the ones currently used by the kernel.
+
+	Supported_Features and Enabled_Features are bitmasks with currently
+	the following available bits:
+
+		1	Advertisement content monitoring based on patterns with
+			logic OR.
+
+	Max_Num_Handles indicates the maximum number of supported
+	advertisement monitors. Note that the actual number of supported
+	ones might be less depending on the limitation of the controller.
+
+	Max_Num_Pattern indicates the maximum number of supported patterns
+	in an advertisement patterns monitor. Note that the actual number
+	of supported ones might be less depending on the limitation of the
+	controller.
+
+	Num_Handles indicates the number of added advertisement monitors,
+	and it is followed by a list of handles.
+
+	This command can be used when the controller is not powered.
+
+
+Add Advertisement Patterns Monitor Command
+=========================================
+
+	Command Code:		0x004A
+	Controller Index:	<controller id>
+	Command Parameters:	Pattern_Count (1 Octet)
+				Pattern1 {
+					AD_Type (1 Octet)
+					Offset (1 Octet)
+					Length (1 Octet)
+					Value (31 Octets)
+				}
+				Pattern2 { }
+				...
+	Return Parameters:	Monitor_Handle (2 Octets)
+
+	This command is used to add an advertisement monitor whose
+	filtering conditions are patterns. The kernel will trigger scanning
+	if there is at least one monitor added. If the controller supports
+	advertisement filtering, the kernel would offload the content
+	filtering to the controller in order to reduce power consumption;
+	otherwise the kernel ignores the content of the monitor. Note that
+	if the there are more than one patterns, OR logic would applied
+	among patterns during filtering. In other words, any advertisement
+	matching at least one pattern in a given monitor would be
+	considered as a match.
+
+	A pattern contains the following fields.
+		AD_Data_Type	Advertising Data Type. The possible values
+				are defined in Core Specification
+				Supplement.
+		Offset		The start index where pattern matching
+				shall be performed with in the AD data.
+		Length		The length of the pattern value in bytes.
+		Value		The value of the pattern in bytes.
+
+	Here is an example of a pattern.
+		{
+			0x16, // Service Data - 16-bit UUID
+			0x02, // Skip the UUID part.
+			0x04,
+			{0x11, 0x22, 0x33, 0x44},
+		}
+
+	This command can be used when the controller is not powered and
+	all settings will be programmed once powered.
+
+	Possible errors:	Failed
+				Busy
+				No Resources
+				Invalid Parameters
+
+
+Remove Advertisement Monitor Command
+====================================
+
+	Command Code:		0x004B
+	Controller Index:	<controller id>
+	Command Parameters:	Monitor_Handle (2 Octets)
+	Return Parameters:	Monitor_Handle (2 Octets)
+
+	This command is used to remove advertisement monitor(s). The kernel
+	would remove the monitor(s) with Monitor_Handle and update the LE
+	scanning.
+
+	When the Monitor_Handle is set to zero, then all previously added
+	handles will be removed.
+
+	Removing a monitor while it is being added will be ignored.
+
+	This command can be used when the controller is not powered and
+	all settings will be programmed once powered.
+
+	Possible errors:	Failed
+				Busy
+				Invalid Index
+
+
 Command Complete Event
 ======================
 
@@ -4020,3 +4139,31 @@  PHY Configuration Changed Event
 	one through which the change was triggered.
 
 	Refer Get PHY Configuration command for PHYs parameter.
+
+
+Advertisement Monitor Added Event
+=================================
+
+	Event Code:		0x0027
+	Controller Index:	<controller id>
+	Event Parameters:	Monitor_Handle (2 Octets)
+
+	This event indicates that an advertisement monitor has been added
+	using the Add Advertisement Monitor command.
+
+	The event will only be sent to management sockets other than the
+	one through which the command was sent.
+
+
+Advertisement Monitor Removed Event
+===================================
+
+	Event Code:		0x0028
+	Controller Index:	<controller id>
+	Event Parameters:	Monitor_Handle (2 Octets)
+
+	This event indicates that an advertisement monitor has been removed
+	using the Remove Advertisement Monitor command.
+
+	The event will only be sent to management sockets other than the
+	one through which the command was sent.