diff mbox series

[BlueZ,3/3] main:read default system configuration from the conf file.

Message ID 20200529145007.198906-4-alainm@chromium.org (mailing list archive)
State Superseded
Headers show
Series Load default system configuration from file. | expand

Commit Message

Alain Michaud May 29, 2020, 2:50 p.m. UTC 
This change adds support for reading the configurations from the
main.conf file.

---

 src/main.c    | 162 ++++++++++++++++++++++++++++++++++++++++++++++++++
 src/main.conf |  65 ++++++++++++++++++++
 2 files changed, 227 insertions(+)

Comments

bluez.test.bot@gmail.com May 29, 2020, 3:09 p.m. UTC | #1 
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
While we are preparing for reviewing the patches, we found the following
issue/warning.

Test Result:
checkgitlint Failed

Outputs:
1: T3 Title has trailing punctuation (.): "main:read default system configuration from the conf file."



---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/src/main.c b/src/main.c
index 98621fddf..ca27f313d 100644
--- a/src/main.c
+++ b/src/main.c
@@ -54,6 +54,7 @@ 
 #include "shared/att-types.h"
 #include "shared/mainloop.h"
 #include "lib/uuid.h"
+#include "shared/util.h"
 #include "hcid.h"
 #include "sdpd.h"
 #include "adapter.h"
@@ -97,6 +98,37 @@  static const char *supported_options[] = {
 	NULL
 };
 
+static const char * const controller_options[] = {
+	"BRPageScanType",
+	"BRPageScanInterval",
+	"BRPageScanWindow",
+	"BRInquiryScanType",
+	"BRInquiryScanInterval",
+	"BRInquiryScanWindow",
+	"BRLinkSupervisionTimeout",
+	"BRPageTimeout",
+	"BRMinSniffInterval",
+	"BRMaxSniffInterval",
+	"LEMinAdvertisementInterval",
+	"LEMaxAdvertisementInterval",
+	"LEMultiAdvertisementRotationInterval",
+	"LEScanIntervalAutoConnect",
+	"LEScanWindowAutoConnect",
+	"LEScanIntervalSuspend",
+	"LEScanWindowSuspend",
+	"LEScanIntervalDiscovery",
+	"LEScanWindowDiscovery",
+	"LEScanIntervalAdvMonitoring",
+	"LEScanWindowAdvMonitoring",
+	"LEScanIntervalConnect",
+	"LEScanWindowConnect",
+	"LEMinConnectionInterval",
+	"LEMaxConnectionInterval",
+	"LEConnectionLatency",
+	"LEConnectionSupervisionTimeout",
+	NULL
+};
+
 static const char *policy_options[] = {
 	"ReconnectUUIDs",
 	"ReconnectAttempts",
@@ -118,6 +150,7 @@  static const struct group_table {
 	const char **options;
 } valid_groups[] = {
 	{ "General",	supported_options },
+	{ "Controller", controller_options },
 	{ "Policy",	policy_options },
 	{ "GATT",	gatt_options },
 	{ }
@@ -283,6 +316,129 @@  static int get_mode(const char *str)
 	return BT_MODE_DUAL;
 }
 
+static void parse_controller_config(GKeyFile *config)
+{
+	static const struct {
+		const char * const val_name;
+		uint16_t * const val;
+		const uint16_t min;
+		const uint16_t max;
+	} params[] = {
+		{ "BRPageScanType",
+		  &main_opts.default_params.br_page_scan_type,
+		  0,
+		  1},
+		{ "BRPageScanInterval",
+		  &main_opts.default_params.br_page_scan_interval,
+		  0x0012,
+		  0x1000},
+		{ "BRPageScanWindow",
+		  &main_opts.default_params.br_page_scan_window,
+		  0x0011,
+		  0x1000},
+		{ "BRInquiryScanType",
+		  &main_opts.default_params.br_inquiry_scan_type,
+		  0,
+		  1},
+		{ "BRInquiryScanInterval",
+		  &main_opts.default_params.br_inquiry_scan_interval,
+		  0x0012,
+		  0x1000},
+		{ "BRInquiryScanWindow",
+		  &main_opts.default_params.br_inquiry_scan_window,
+		  0x0011,
+		  0x1000},
+		{ "BRLinkSupervisionTimeout",
+		  &main_opts.default_params.br_link_supervision_timeout,
+		  0x0001,
+		  0xFFFF},
+		{ "BRPageTimeout",
+		  &main_opts.default_params.br_page_timeout,
+		  0x0001,
+		  0xFFFF},
+		{ "BRMinSniffInterval",
+		  &main_opts.default_params.br_min_sniff_interval,
+		  0x0001,
+		  0xFFFE},
+		{ "BRMaxSniffInterval",
+		  &main_opts.default_params.br_max_sniff_interval,
+		  0x0001,
+		  0xFFFE},
+		{ "LEMinAdvertisementInterval",
+		  &main_opts.default_params.le_min_adv_interval,
+		  0x0020,
+		  0x4000},
+		{ "LEMaxAdvertisementInterval",
+		  &main_opts.default_params.le_max_adv_interval,
+		  0x0020,
+		  0x4000},
+		{ "LEMultiAdvertisementRotationInterval",
+		  &main_opts.default_params.le_multi_adv_rotation_interval,
+		  0x0001,
+		  0xFFFF},
+		{ "LEScanIntervalAutoConnect",
+		  &main_opts.default_params.le_scan_interval_autoconnect,
+		  0x0004,
+		  0x4000},
+		{ "LEScanWindowAutoConnect",
+		  &main_opts.default_params.le_scan_window_autoconnect,
+		  0x0004,
+		  0x4000},
+		{ "LEScanIntervalSuspend",
+		  &main_opts.default_params.le_scan_interval_suspend,
+		  0x0004,
+		  0x4000},
+		{ "LEScanWindowSuspend",
+		  &main_opts.default_params.le_scan_window_suspend,
+		  0x0004,
+		  0x4000},
+		{ "LEScanIntervalDiscovery",
+		  &main_opts.default_params.le_scan_interval_discovery,
+		  0x0004,
+		  0x4000},
+		{ "LEScanWindowDiscovery",
+		  &main_opts.default_params.le_scan_window_discovery,
+		  0x0004,
+		  0x4000},
+		{ "LEScanIntervalAdvMonitor",
+		  &main_opts.default_params.le_scan_interval_adv_monitor,
+		  0x0004,
+		  0x4000},
+		{ "LEScanWindowAdvMonitor",
+		  &main_opts.default_params.le_scan_window_adv_monitor,
+		  0x0004,
+		  0x4000},
+		{ "LEScanIntervalConnect",
+		  &main_opts.default_params.le_scan_interval_connect,
+		  0x0004,
+		  0x4000},
+		{ "LEScanWindowConnect",
+		  &main_opts.default_params.le_scan_window_connect,
+		  0x0004,
+		  0x4000},
+	};
+	uint16_t i;
+
+	if (!config)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(params); ++i) {
+		GError *err = NULL;
+		int val = g_key_file_get_integer(config, "Controller",
+						params[i].val_name, &err);
+		if (err) {
+			g_clear_error(&err);
+		} else {
+			DBG("%s=%d", params[i].val_name, val);
+
+			val = MIN(val, params[i].min);
+			val = MAX(val, params[i].max);
+			*params[i].val = val;
+			++main_opts.default_params.num_set_params;
+		}
+	}
+}
+
 static void parse_config(GKeyFile *config)
 {
 	GError *err = NULL;
@@ -484,6 +640,8 @@  static void parse_config(GKeyFile *config)
 		val = MAX(val, 1);
 		main_opts.gatt_channels = val;
 	}
+
+	parse_controller_config(config);
 }
 
 static void init_defaults(void)
@@ -500,6 +658,10 @@  static void init_defaults(void)
 	main_opts.name_resolv = TRUE;
 	main_opts.debug_keys = FALSE;
 
+	main_opts.default_params.num_set_params = 0;
+	main_opts.default_params.br_page_scan_type = 0xFFFF;
+	main_opts.default_params.br_inquiry_scan_type = 0xFFFF;
+
 	if (sscanf(VERSION, "%hhu.%hhu", &major, &minor) != 2)
 		return;
 
diff --git a/src/main.conf b/src/main.conf
index 16701ebe4..92d937f0c 100644
--- a/src/main.conf
+++ b/src/main.conf
@@ -77,6 +77,71 @@ 
 # Defaults to "never"
 #JustWorksRepairing = never
 
+[Controller]
+# The following values are used to load default adapter parameters.  BlueZ loads
+# the values into the kernel before the adapter is powered if the kernel
+# supports the MGMT_LOAD_DEFAULT_PARAMETERS command. If a value isn't provided,
+# the kernel will be initialized to it's default value.  The actual value will
+# vary based on the kernel version and thus aren't provided here.
+# The Bluetooth Core Specification should be consulted for the meaning and valid
+# domain of each of these values.
+
+# BR/EDR Page scan activity configuration
+#BRPageScanType=
+#BRPageScanInterval=
+#BRPageScanWindow=
+
+# BR/EDR Inquiry scan activity configuration
+#BRInquiryScanType=
+#BRInquiryScanInterval=
+#BRInquiryScanWindow=
+
+# BR/EDR Link supervision timeout
+#BRLinkSupervisionTimeout=
+
+# BR/EDR Page Timeout
+#BRPageTimeout=
+
+# BR/EDR Sniff Intervals
+#BRMinSniffInterval=
+#BRMaxSniffInterval=
+
+# LE advertisement interval (used for legacy advertisement interface only)
+#LEMinAdvertisementInterval=
+#LEMaxAdvertisementInterval=
+#LEMultiAdvertisementRotationInterval=
+
+# LE scanning parameters used for passive scanning supporting auto connect
+# scenarios
+#LEScanIntervalAutoConnect=
+#LEScanWindowAutoConnect=
+
+# LE scanning parameters used for passive scanning supporting wake from suspend
+# scenarios
+#LEScanIntervalSuspend=
+#LEScanWindowSuspend=
+
+# LE scanning parameters used for active scanning supporting discovery
+# proceedure
+#LEScanIntervalDiscovery=
+#LEScanWindowDiscovery=
+
+# LE scanning parameters used for passive scanning supporting the advertisement
+# monitor Apis
+#LEScanIntervalAdvMonitor=
+#LEScanWindowAdvMonitor=
+
+# LE scanning parameters used for connection establishment.
+#LEScanIntervalConnect=
+#LEScanWindowConnect=
+
+# LE default connection parameters.  These values are superceeded by any
+# specific values provided via the Load Connection Parameters interface
+#LEMinConnectionInterval=
+#LEMaxConnectionInterval=
+#LEConnectionLatency=
+#LEConnectionSupervisionTimeout=
+
 [GATT]
 # GATT attribute cache.
 # Possible values: