Message ID | 20200612130219.v2.1.I66864be898aa835ccb66b6cd5220d0b082338a81@changeid (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | [v2] ARM: dts: rockchip: Add marvell BT irq config | expand |
On Fri, 12 Jun 2020 13:02:48 -0700, Abhishek Pandit-Subedi wrote: > Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup > and pinctrl block to devicetree so the btmrvl driver can correctly > configure the wakeup interrupt. Applied, thanks! [1/1] ARM: dts: rockchip: Add marvell BT irq config commit: 6c2b99a2e7a073575b4ee91abf7d16470991c1f4 Best regards,
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 171ba6185b6d39..c15d6865f5a390 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -44,6 +44,21 @@ regulator-state-mem { }; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <13>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + }; +}; + &sdmmc { disable-wp; pinctrl-names = "default";