diff mbox series

[Bluez] main: adding configurable eir_max_name_len

Message ID 20200727173720.2700327-1-alainm@chromium.org (mailing list archive)
State New, archived
Headers show
Series [Bluez] main: adding configurable eir_max_name_len | expand

Commit Message

Alain Michaud July 27, 2020, 5:37 p.m. UTC
This change adds support for a configurable eir_max_name_len for
platforms which requires a larger than 48 bytes complete name in EIR.

From bluetoothctl:
[bluetooth]# system-alias
012345678901234567890123456789012345678901234567890123456789
Changing 012345678901234567890123456789012345678901234567890123456789
succeeded
[CHG] Controller DC:71:96:69:02:89 Alias:
012345678901234567890123456789012345678901234567890123456789

From btmon:
< HCI Command: Write Local Name (0x03|0x0013) plen 248             #109
[hci0] 88.567990
        Name:
012345678901234567890123456789012345678901234567890123456789
> HCI Event: Command Complete (0x0e) plen 4                             
   #110 [hci0] 88.663854
      Write Local Name (0x03|0x0013) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Local Name Changed (0x0008) plen 260               
{0x0004} [hci0] 88.663948
        Name:
012345678901234567890123456789012345678901234567890123456789
        Short name:
< HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241 
        FEC: Not required (0x00)
        Name (complete):
012345678901234567890123456789012345678901234567890123456789
        TX power: 12 dBm
        Device ID: Bluetooth SIG assigned (0x0001)
          Vendor: Google (224)
          Product: 0xc405
          Version: 0.5.6 (0x0056)
        16-bit Service UUIDs (complete): 7 entries
          Generic Access Profile (0x1800)
          Generic Attribute Profile (0x1801)
          Device Information (0x180a)
          A/V Remote Control (0x110e)
          A/V Remote Control Target (0x110c)
          Handsfree Audio Gateway (0x111f)
          Audio Source (0x110a)
> HCI Event: Command Complete (0x0e) plen 4                           
      Write Extended Inquiry Response (0x03|0x0052) ncmd 1
        Status: Success (0x00)

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Alain Michaud <alainm@chromium.org>
---

 doc/mgmt-api.txt |  1 +
 src/adapter.c    | 10 +++++++++-
 src/hcid.h       |  1 +
 src/main.c       |  5 +++++
 src/main.conf    |  5 +++++
 5 files changed, 21 insertions(+), 1 deletion(-)

Comments

Marcel Holtmann July 28, 2020, 6:58 a.m. UTC | #1
Hi Alain,

> This change adds support for a configurable eir_max_name_len for
> platforms which requires a larger than 48 bytes complete name in EIR.
> 
> From bluetoothctl:
> [bluetooth]# system-alias
> 012345678901234567890123456789012345678901234567890123456789
> Changing 012345678901234567890123456789012345678901234567890123456789
> succeeded
> [CHG] Controller DC:71:96:69:02:89 Alias:
> 012345678901234567890123456789012345678901234567890123456789
> 
> From btmon:
> < HCI Command: Write Local Name (0x03|0x0013) plen 248             #109
> [hci0] 88.567990
>         Name:
> 012345678901234567890123456789012345678901234567890123456789
>> HCI Event: Command Complete (0x0e) plen 4                             
>    #110 [hci0] 88.663854
>       Write Local Name (0x03|0x0013) ncmd 1
>         Status: Success (0x00)
> @ MGMT Event: Local Name Changed (0x0008) plen 260               
> {0x0004} [hci0] 88.663948
>         Name:
> 012345678901234567890123456789012345678901234567890123456789
>         Short name:
> < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241 
>         FEC: Not required (0x00)
>         Name (complete):
> 012345678901234567890123456789012345678901234567890123456789
>         TX power: 12 dBm
>         Device ID: Bluetooth SIG assigned (0x0001)
>           Vendor: Google (224)
>           Product: 0xc405
>           Version: 0.5.6 (0x0056)
>         16-bit Service UUIDs (complete): 7 entries
>           Generic Access Profile (0x1800)
>           Generic Attribute Profile (0x1801)
>           Device Information (0x180a)
>           A/V Remote Control (0x110e)
>           A/V Remote Control Target (0x110c)
>           Handsfree Audio Gateway (0x111f)
>           Audio Source (0x110a)
>> HCI Event: Command Complete (0x0e) plen 4                           
>       Write Extended Inquiry Response (0x03|0x0052) ncmd 1
>         Status: Success (0x00)
> 
> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
> Signed-off-by: Alain Michaud <alainm@chromium.org>
> ---
> 
> doc/mgmt-api.txt |  1 +
> src/adapter.c    | 10 +++++++++-
> src/hcid.h       |  1 +
> src/main.c       |  5 +++++
> src/main.conf    |  5 +++++
> 5 files changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
> index ca0d38469..1bc0f0c12 100644
> --- a/doc/mgmt-api.txt
> +++ b/doc/mgmt-api.txt
> @@ -3279,6 +3279,7 @@ Read Default System Configuration Command
> 		0x0019	LE Connection Latency
> 		0x001a	LE Connection Supervision Timeout
> 		0x001b	LE Autoconnect Timeout
> +		0x001c	Max EIR Name Length

we can certainly do this, but I prefer that do this for LE and BR/EDR and name it that way as well.

> 
> 	This command can be used at any time and will return a list of
> 	supported default parameters as well as their current value.
> diff --git a/src/adapter.c b/src/adapter.c
> index 5e896a9f0..3adc67b63 100644
> --- a/src/adapter.c
> +++ b/src/adapter.c
> @@ -2375,7 +2375,7 @@ static bool parse_pathloss(DBusMessageIter *value,
> 	return true;
> }
> 
> -static bool parse_transport(DBusMessageIter *value, 
> +static bool parse_transport(DBusMessageIter *value,
> 					struct discovery_filter *filter)
> {
> 	char *transport_str;
> @@ -4435,6 +4435,14 @@ static void load_default_system_params(struct btd_adapter *adapter)
> 		len += sizeof(params[i].u16);
> 	}
> 
> +	if (main_opts.default_params.eir_max_name_len) {
> +		params[i].entry.type = 0x001c;
> +		params[i].entry.length = sizeof(params[i].u16);
> +		params[i].u16 = main_opts.default_params.eir_max_name_len;
> +		++i;
> +		len += sizeof(params[i].u16);
> +	}
> +

Do you really want to keep it as uint16_t or is that just laziness since changing the kernel to support anything other than uint16_t is complicated?

On a side note, you need to provide a uint16_t value in little endian to the MGMT wire protocol.

> 	err = mgmt_send(adapter->mgmt, MGMT_OP_SET_DEF_SYSTEM_CONFIG,
> 			adapter->dev_id, len, params, NULL, NULL, NULL);
> 	if (!err)
> diff --git a/src/hcid.h b/src/hcid.h
> index 5f249ebf9..c9b59a374 100644
> --- a/src/hcid.h
> +++ b/src/hcid.h
> @@ -93,6 +93,7 @@ struct main_opts {
> 		uint16_t	le_conn_latency;
> 		uint16_t	le_conn_lsto;
> 		uint16_t	le_autoconnect_timeout;
> +		uint16_t	eir_max_name_len;
> 	} default_params;
> 
> 
> diff --git a/src/main.c b/src/main.c
> index ec7a9fbd7..74876e01d 100644
> --- a/src/main.c
> +++ b/src/main.c
> @@ -123,6 +123,7 @@ static const char *controller_options[] = {
> 	"LEConnectionLatency",
> 	"LEConnectionSupervisionTimeout",
> 	"LEAutoconnecttimeout",
> +	"EirMaxNameLength",
> 	NULL
> };
> 
> @@ -433,6 +434,10 @@ static void parse_controller_config(GKeyFile *config)
> 		  &main_opts.default_params.le_autoconnect_timeout,
> 		  0x0001,
> 		  0x4000},
> +		{ "EirMaxNameLength",
> +		  &main_opts.default_params.eir_max_name_len,
> +		  0x0001,
> +		  0x00EE},
> 	};
> 	uint16_t i;
> 
> diff --git a/src/main.conf b/src/main.conf
> index f41203b96..7ecac5930 100644
> --- a/src/main.conf
> +++ b/src/main.conf
> @@ -148,6 +148,11 @@
> #LEConnectionSupervisionTimeout=
> #LEAutoconnecttimeout=
> 
> +# EIR Max Name. This is the maximum length for the COMPLETE_NAME EIR section.
> +# If the name length exceeds this size, a SHORT_NAME section is used.
> +# Default: 48
> +#EirMaxNameLength = 48
> +
> [GATT]
> # GATT attribute cache.
> # Possible values:

Regards

Marcel
Alain Michaud July 28, 2020, 1:10 p.m. UTC | #2
On Tue, Jul 28, 2020 at 2:58 AM Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Alain,
>
> > This change adds support for a configurable eir_max_name_len for
> > platforms which requires a larger than 48 bytes complete name in EIR.
> >
> > From bluetoothctl:
> > [bluetooth]# system-alias
> > 012345678901234567890123456789012345678901234567890123456789
> > Changing 012345678901234567890123456789012345678901234567890123456789
> > succeeded
> > [CHG] Controller DC:71:96:69:02:89 Alias:
> > 012345678901234567890123456789012345678901234567890123456789
> >
> > From btmon:
> > < HCI Command: Write Local Name (0x03|0x0013) plen 248             #109
> > [hci0] 88.567990
> >         Name:
> > 012345678901234567890123456789012345678901234567890123456789
> >> HCI Event: Command Complete (0x0e) plen 4
> >    #110 [hci0] 88.663854
> >       Write Local Name (0x03|0x0013) ncmd 1
> >         Status: Success (0x00)
> > @ MGMT Event: Local Name Changed (0x0008) plen 260
> > {0x0004} [hci0] 88.663948
> >         Name:
> > 012345678901234567890123456789012345678901234567890123456789
> >         Short name:
> > < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
> >         FEC: Not required (0x00)
> >         Name (complete):
> > 012345678901234567890123456789012345678901234567890123456789
> >         TX power: 12 dBm
> >         Device ID: Bluetooth SIG assigned (0x0001)
> >           Vendor: Google (224)
> >           Product: 0xc405
> >           Version: 0.5.6 (0x0056)
> >         16-bit Service UUIDs (complete): 7 entries
> >           Generic Access Profile (0x1800)
> >           Generic Attribute Profile (0x1801)
> >           Device Information (0x180a)
> >           A/V Remote Control (0x110e)
> >           A/V Remote Control Target (0x110c)
> >           Handsfree Audio Gateway (0x111f)
> >           Audio Source (0x110a)
> >> HCI Event: Command Complete (0x0e) plen 4
> >       Write Extended Inquiry Response (0x03|0x0052) ncmd 1
> >         Status: Success (0x00)
> >
> > Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
> > Signed-off-by: Alain Michaud <alainm@chromium.org>
> > ---
> >
> > doc/mgmt-api.txt |  1 +
> > src/adapter.c    | 10 +++++++++-
> > src/hcid.h       |  1 +
> > src/main.c       |  5 +++++
> > src/main.conf    |  5 +++++
> > 5 files changed, 21 insertions(+), 1 deletion(-)
> >
> > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
> > index ca0d38469..1bc0f0c12 100644
> > --- a/doc/mgmt-api.txt
> > +++ b/doc/mgmt-api.txt
> > @@ -3279,6 +3279,7 @@ Read Default System Configuration Command
> >               0x0019  LE Connection Latency
> >               0x001a  LE Connection Supervision Timeout
> >               0x001b  LE Autoconnect Timeout
> > +             0x001c  Max EIR Name Length
>
> we can certainly do this, but I prefer that do this for LE and BR/EDR and name it that way as well.
I do think that we need distinct values for br/edr and le since the
available space is different.  I don't think a single value makes
sense for both transports.

>
> >
> >       This command can be used at any time and will return a list of
> >       supported default parameters as well as their current value.
> > diff --git a/src/adapter.c b/src/adapter.c
> > index 5e896a9f0..3adc67b63 100644
> > --- a/src/adapter.c
> > +++ b/src/adapter.c
> > @@ -2375,7 +2375,7 @@ static bool parse_pathloss(DBusMessageIter *value,
> >       return true;
> > }
> >
> > -static bool parse_transport(DBusMessageIter *value,
> > +static bool parse_transport(DBusMessageIter *value,
> >                                       struct discovery_filter *filter)
> > {
> >       char *transport_str;
> > @@ -4435,6 +4435,14 @@ static void load_default_system_params(struct btd_adapter *adapter)
> >               len += sizeof(params[i].u16);
> >       }
> >
> > +     if (main_opts.default_params.eir_max_name_len) {
> > +             params[i].entry.type = 0x001c;
> > +             params[i].entry.length = sizeof(params[i].u16);
> > +             params[i].u16 = main_opts.default_params.eir_max_name_len;
> > +             ++i;
> > +             len += sizeof(params[i].u16);
> > +     }
> > +
>
> Do you really want to keep it as uint16_t or is that just laziness since changing the kernel to support anything other than uint16_t is complicated?
Yes, this is to re-use the existing infra without complicating the
buffer structure.  There are a couple more values that are effectively
uint8_t but use uint16_t above (like page scan type).

>
> On a side note, you need to provide a uint16_t value in little endian to the MGMT wire protocol.
Sounds like this is a separate issue that needs to be fixed for all
values then.  I'd rather keep that as a separate patch.

>
> >       err = mgmt_send(adapter->mgmt, MGMT_OP_SET_DEF_SYSTEM_CONFIG,
> >                       adapter->dev_id, len, params, NULL, NULL, NULL);
> >       if (!err)
> > diff --git a/src/hcid.h b/src/hcid.h
> > index 5f249ebf9..c9b59a374 100644
> > --- a/src/hcid.h
> > +++ b/src/hcid.h
> > @@ -93,6 +93,7 @@ struct main_opts {
> >               uint16_t        le_conn_latency;
> >               uint16_t        le_conn_lsto;
> >               uint16_t        le_autoconnect_timeout;
> > +             uint16_t        eir_max_name_len;
> >       } default_params;
> >
> >
> > diff --git a/src/main.c b/src/main.c
> > index ec7a9fbd7..74876e01d 100644
> > --- a/src/main.c
> > +++ b/src/main.c
> > @@ -123,6 +123,7 @@ static const char *controller_options[] = {
> >       "LEConnectionLatency",
> >       "LEConnectionSupervisionTimeout",
> >       "LEAutoconnecttimeout",
> > +     "EirMaxNameLength",
> >       NULL
> > };
> >
> > @@ -433,6 +434,10 @@ static void parse_controller_config(GKeyFile *config)
> >                 &main_opts.default_params.le_autoconnect_timeout,
> >                 0x0001,
> >                 0x4000},
> > +             { "EirMaxNameLength",
> > +               &main_opts.default_params.eir_max_name_len,
> > +               0x0001,
> > +               0x00EE},
> >       };
> >       uint16_t i;
> >
> > diff --git a/src/main.conf b/src/main.conf
> > index f41203b96..7ecac5930 100644
> > --- a/src/main.conf
> > +++ b/src/main.conf
> > @@ -148,6 +148,11 @@
> > #LEConnectionSupervisionTimeout=
> > #LEAutoconnecttimeout=
> >
> > +# EIR Max Name. This is the maximum length for the COMPLETE_NAME EIR section.
> > +# If the name length exceeds this size, a SHORT_NAME section is used.
> > +# Default: 48
> > +#EirMaxNameLength = 48
> > +
> > [GATT]
> > # GATT attribute cache.
> > # Possible values:
>
> Regards
>
> Marcel
>
diff mbox series

Patch

diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index ca0d38469..1bc0f0c12 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -3279,6 +3279,7 @@  Read Default System Configuration Command
 		0x0019	LE Connection Latency
 		0x001a	LE Connection Supervision Timeout
 		0x001b	LE Autoconnect Timeout
+		0x001c	Max EIR Name Length
 
 	This command can be used at any time and will return a list of
 	supported default parameters as well as their current value.
diff --git a/src/adapter.c b/src/adapter.c
index 5e896a9f0..3adc67b63 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -2375,7 +2375,7 @@  static bool parse_pathloss(DBusMessageIter *value,
 	return true;
 }
 
-static bool parse_transport(DBusMessageIter *value, 
+static bool parse_transport(DBusMessageIter *value,
 					struct discovery_filter *filter)
 {
 	char *transport_str;
@@ -4435,6 +4435,14 @@  static void load_default_system_params(struct btd_adapter *adapter)
 		len += sizeof(params[i].u16);
 	}
 
+	if (main_opts.default_params.eir_max_name_len) {
+		params[i].entry.type = 0x001c;
+		params[i].entry.length = sizeof(params[i].u16);
+		params[i].u16 = main_opts.default_params.eir_max_name_len;
+		++i;
+		len += sizeof(params[i].u16);
+	}
+
 	err = mgmt_send(adapter->mgmt, MGMT_OP_SET_DEF_SYSTEM_CONFIG,
 			adapter->dev_id, len, params, NULL, NULL, NULL);
 	if (!err)
diff --git a/src/hcid.h b/src/hcid.h
index 5f249ebf9..c9b59a374 100644
--- a/src/hcid.h
+++ b/src/hcid.h
@@ -93,6 +93,7 @@  struct main_opts {
 		uint16_t	le_conn_latency;
 		uint16_t	le_conn_lsto;
 		uint16_t	le_autoconnect_timeout;
+		uint16_t	eir_max_name_len;
 	} default_params;
 
 
diff --git a/src/main.c b/src/main.c
index ec7a9fbd7..74876e01d 100644
--- a/src/main.c
+++ b/src/main.c
@@ -123,6 +123,7 @@  static const char *controller_options[] = {
 	"LEConnectionLatency",
 	"LEConnectionSupervisionTimeout",
 	"LEAutoconnecttimeout",
+	"EirMaxNameLength",
 	NULL
 };
 
@@ -433,6 +434,10 @@  static void parse_controller_config(GKeyFile *config)
 		  &main_opts.default_params.le_autoconnect_timeout,
 		  0x0001,
 		  0x4000},
+		{ "EirMaxNameLength",
+		  &main_opts.default_params.eir_max_name_len,
+		  0x0001,
+		  0x00EE},
 	};
 	uint16_t i;
 
diff --git a/src/main.conf b/src/main.conf
index f41203b96..7ecac5930 100644
--- a/src/main.conf
+++ b/src/main.conf
@@ -148,6 +148,11 @@ 
 #LEConnectionSupervisionTimeout=
 #LEAutoconnecttimeout=
 
+# EIR Max Name. This is the maximum length for the COMPLETE_NAME EIR section.
+# If the name length exceeds this size, a SHORT_NAME section is used.
+# Default: 48
+#EirMaxNameLength = 48
+
 [GATT]
 # GATT attribute cache.
 # Possible values: