diff mbox series

[BlueZ,v3,06/10] mesh: Clean up handling of config relay messages

Message ID 20200804201744.23327-6-inga.stotland@intel.com (mailing list archive)
State Superseded
Headers show
Series [BlueZ,v3,01/10] mesh: Clean up handling of config subscription messages | expand

Commit Message

Stotland, Inga Aug. 4, 2020, 8:17 p.m. UTC
This modification allows using a single point for sending out
the composed status messages by the Config Server.
---
 mesh/cfgmod-server.c | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/mesh/cfgmod-server.c b/mesh/cfgmod-server.c
index 030f9e744..6ca1c1dd1 100644
--- a/mesh/cfgmod-server.c
+++ b/mesh/cfgmod-server.c
@@ -396,6 +396,30 @@  static uint16_t model_app_bind(struct mesh_node *node, const uint8_t *pkt,
 	return n;
 }
 
+static uint16_t cfg_relay_msg(struct mesh_node *node, const uint8_t *pkt,
+								int opcode)
+{
+	uint8_t count;
+	uint16_t interval;
+	uint16_t n;
+
+	if (pkt[0] > 0x01)
+		return 0;
+
+	if (opcode == OP_CONFIG_RELAY_SET) {
+		count = (pkt[1] & 0x7) + 1;
+		interval = ((pkt[1] >> 3) + 1) * 10;
+		node_relay_mode_set(node, !!pkt[0], count, interval);
+	}
+
+	n = mesh_model_opcode_set(OP_CONFIG_RELAY_STATUS, msg);
+
+	msg[n++] = node_relay_mode_get(node, &count, &interval);
+	msg[n++] = (count - 1) + ((interval/10 - 1) << 3);
+
+	return n;
+}
+
 static void hb_pub_timeout_func(struct l_timeout *timeout, void *user_data)
 {
 	struct mesh_net *net = user_data;
@@ -765,24 +789,14 @@  static bool cfg_srv_pkt(uint16_t src, uint16_t dst, uint16_t app_idx,
 		break;
 
 	case OP_CONFIG_RELAY_SET:
-		if (size != 2 || pkt[0] > 0x01)
+		if (size != 2)
 			return true;
-
-		count = (pkt[1] & 0x7) + 1;
-		interval = ((pkt[1] >> 3) + 1) * 10;
-		node_relay_mode_set(node, !!pkt[0], count, interval);
 		/* Fall Through */
-
 	case OP_CONFIG_RELAY_GET:
 		if (opcode == OP_CONFIG_RELAY_GET && size != 0)
 			return true;
 
-		n = mesh_model_opcode_set(OP_CONFIG_RELAY_STATUS, msg);
-
-		msg[n++] = node_relay_mode_get(node, &count, &interval);
-		msg[n++] = (count - 1) + ((interval/10 - 1) << 3);
-
-		l_debug("Get/Set Relay Config (%d)", msg[n-1]);
+		n = cfg_relay_msg(node, pkt, opcode);
 		break;
 
 	case OP_CONFIG_NETWORK_TRANSMIT_SET: