diff mbox series

[Bluez,v5,05/10] advertising: Parse intervals and tx power from adv

Message ID 20201029141832.Bluez.v5.5.Ic4a3667da774f5f34477d5168a68a9280657e2da@changeid (mailing list archive)
State New, archived
Headers show
Series Bluetooth: Add new MGMT interface for advertising add | expand

Commit Message

Daniel Winkler Oct. 29, 2020, 9:23 p.m. UTC
This change adds parsers for the advertising intervals and tx power
properties of the LEAdvertisement1 object. It validates that each field
adheres to the 5.2 spec, and that min and max intervals are compatible
with each other, i.e. that min interval is less than max interval.

A note here for maintainers: The tx power that is sent in the hci
parameter command is an int8_t, but as far as I can tell, there is no
clean way to use a signed 8-bit integer in dbus. The dbus byte type
seems incompatible with negative values in high-level languages (python)
without awkward usage manipulation on the client side. For this reason,
I chose to use an int16_t type for the tx power dbus field, which is
then downcasted to the int8_t in bluetoothd, which at least makes the
signed-ness of the type crystal clear to the dbus client that uses it.

This change is manually verified by ensuring the intervals and tx power
parameters are correctly parsed from the LEAdvertisement1 object, and
that the parse fails if the parameters are incorrect or not compatible
with each other.

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
---

Changes in v5:
- Only parse new properties if experimental flag is set

Changes in v4: None
Changes in v3: None
Changes in v2: None

 src/advertising.c | 111 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 111 insertions(+)
diff mbox series

Patch

diff --git a/src/advertising.c b/src/advertising.c
index 7c7599552..25d8ba770 100644
--- a/src/advertising.c
+++ b/src/advertising.c
@@ -54,6 +54,11 @@  struct btd_adv_manager {
 #define AD_TYPE_BROADCAST 0
 #define AD_TYPE_PERIPHERAL 1
 
+/* BLUETOOTH SPECIFICATION Version 5.2 | Vol 4, Part E, page 2585
+ * defines tx power value indicating no preference
+ */
+#define ADV_TX_POWER_NO_PREFERENCE 0x7F
+
 struct btd_adv_client {
 	struct btd_adv_manager *manager;
 	char *owner;
@@ -74,6 +79,9 @@  struct btd_adv_client {
 	struct bt_ad *data;
 	struct bt_ad *scan;
 	uint8_t instance;
+	uint32_t min_interval;
+	uint32_t max_interval;
+	int8_t tx_power;
 };
 
 struct dbus_obj_match {
@@ -937,6 +945,96 @@  static bool parse_secondary(DBusMessageIter *iter,
 	return false;
 }
 
+static bool parse_min_interval(DBusMessageIter *iter,
+					struct btd_adv_client *client)
+{
+	uint32_t min_interval_ms;
+
+	/* Only consider this property if experimental setting is applied */
+	if (!g_dbus_get_flags() & G_DBUS_FLAG_ENABLE_EXPERIMENTAL)
+		return true;
+
+	if (!iter)
+		return false;
+
+	if (dbus_message_iter_get_arg_type(iter) != DBUS_TYPE_UINT32)
+		return false;
+
+	dbus_message_iter_get_basic(iter, &min_interval_ms);
+
+	/* Convert ms to jiffies to be used in adv request */
+	client->min_interval = min_interval_ms / 0.625;
+
+	/* BLUETOOTH SPECIFICATION Version 5.2 | Vol 4, Part E, page 2584
+	 * defines acceptable interval range
+	 */
+	if (client->min_interval < 0x20 || client->min_interval > 0xFFFFFF) {
+		client->min_interval = 0;
+		return false;
+	}
+
+	return true;
+}
+
+static bool parse_max_interval(DBusMessageIter *iter,
+					struct btd_adv_client *client)
+{
+	uint32_t max_interval_ms;
+
+	/* Only consider this property if experimental setting is applied */
+	if (!g_dbus_get_flags() & G_DBUS_FLAG_ENABLE_EXPERIMENTAL)
+		return true;
+
+	if (!iter)
+		return false;
+
+	if (dbus_message_iter_get_arg_type(iter) != DBUS_TYPE_UINT32)
+		return false;
+
+	dbus_message_iter_get_basic(iter, &max_interval_ms);
+
+	/* Convert ms to jiffies to be used in adv request */
+	client->max_interval = max_interval_ms / 0.625;
+
+	/* BLUETOOTH SPECIFICATION Version 5.2 | Vol 4, Part E, page 2584
+	 * defines acceptable interval range
+	 */
+	if (client->max_interval < 0x20 || client->max_interval > 0xFFFFFF) {
+		client->max_interval = 0;
+		return false;
+	}
+
+	return true;
+}
+
+static bool parse_tx_power(DBusMessageIter *iter,
+					struct btd_adv_client *client)
+{
+	int16_t val;
+
+	/* Only consider this property if experimental setting is applied */
+	if (!g_dbus_get_flags() & G_DBUS_FLAG_ENABLE_EXPERIMENTAL)
+		return true;
+
+	if (!iter)
+		return false;
+
+	if (dbus_message_iter_get_arg_type(iter) != DBUS_TYPE_INT16)
+		return false;
+
+	dbus_message_iter_get_basic(iter, &val);
+
+	/* BLUETOOTH SPECIFICATION Version 5.2 | Vol 4, Part E, page 2585
+	 * defines acceptable tx power range
+	 */
+	if (val < -127 || val > 20)
+		return false;
+
+	client->tx_power = val;
+
+	return true;
+}
+
 static struct adv_parser {
 	const char *name;
 	bool (*func)(DBusMessageIter *iter, struct btd_adv_client *client);
@@ -955,6 +1053,9 @@  static struct adv_parser {
 	{ "Discoverable", parse_discoverable },
 	{ "DiscoverableTimeout", parse_discoverable_timeout },
 	{ "SecondaryChannel", parse_secondary },
+	{ "MinInterval", parse_min_interval },
+	{ "MaxInterval", parse_max_interval },
+	{ "TxPower", parse_tx_power },
 	{ },
 };
 
@@ -1083,6 +1184,13 @@  static DBusMessage *parse_advertisement(struct btd_adv_client *client)
 		goto fail;
 	}
 
+	if (client->min_interval > client->max_interval) {
+		/* Min interval must not be bigger than max interval */
+		error("MinInterval must be less than MaxInterval (%lu > %lu)",
+				client->min_interval, client->max_interval);
+		goto fail;
+	}
+
 	err = refresh_adv(client, add_adv_callback, &client->add_adv_id);
 	if (!err)
 		return NULL;
@@ -1158,6 +1266,9 @@  static struct btd_adv_client *client_create(struct btd_adv_manager *manager,
 
 	client->manager = manager;
 	client->appearance = UINT16_MAX;
+	client->tx_power = ADV_TX_POWER_NO_PREFERENCE;
+	client->min_interval = 0;
+	client->max_interval = 0;
 
 	return client;