diff mbox series

[2/3] Bluetooth: Add quirk to power down on suspend

Message ID 20201118154349.2.Ia5f019f5309cc9f2be9070484a001dc7ddaca354@changeid (mailing list archive)
State New, archived
Headers show
Series Bluetooth: Power down controller when suspending | expand

Commit Message

Abhishek Pandit-Subedi Nov. 18, 2020, 11:43 p.m. UTC
Some older controllers fail to enter a quiescent state reliably when
supporting remote wake. For those cases, add a quirk that will power
down the controller when suspending and power it back up when resuming.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
---

 include/net/bluetooth/hci.h      |  7 +++++
 include/net/bluetooth/hci_core.h |  4 +++
 net/bluetooth/hci_core.c         | 48 ++++++++++++++++++++++++++++++--
 net/bluetooth/hci_request.c      | 26 ++++++++++++++++-
 4 files changed, 82 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c8e67042a3b14c..88d5c9554e4840 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -238,6 +238,13 @@  enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_ERR_DATA_REPORTING,
+
+	/* When this quirk is set, the adapter will be powered down during
+	 * system suspend and powerd up on resume. This should be used on
+	 * controllers that don't behave well during suspend, either causing
+	 * spurious wakeups or not entering a suspend state reliably.
+	 */
+	HCI_QUIRK_POWER_DOWN_SYSTEM_SUSPEND,
 };
 
 /* HCI device flags */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index ff32d5a856f17f..e7dc6e3efbf246 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -90,6 +90,7 @@  struct discovery_state {
 };
 
 #define SUSPEND_NOTIFIER_TIMEOUT	msecs_to_jiffies(2000) /* 2 seconds */
+#define SUSPEND_POWER_DOWN_TIMEOUT	msecs_to_jiffies(1000)
 
 enum suspend_tasks {
 	SUSPEND_PAUSE_DISCOVERY,
@@ -112,6 +113,9 @@  enum suspended_state {
 	BT_RUNNING = 0,
 	BT_SUSPEND_DISCONNECT,
 	BT_SUSPEND_CONFIGURE_WAKE,
+	BT_SUSPEND_DO_POWER_DOWN,
+	BT_SUSPEND_DO_POWER_UP,
+	BT_SUSPEND_POWERED_DOWN,	/* Powered down prior to suspend */
 };
 
 struct hci_conn_hash {
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 8e90850d6d769e..d73e097d3ce16b 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3562,6 +3562,7 @@  static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
 		container_of(nb, struct hci_dev, suspend_notifier);
 	int ret = 0;
 	u8 state = BT_RUNNING;
+	bool powered;
 
 	/* If powering down, wait for completion. */
 	if (mgmt_powering_down(hdev)) {
@@ -3571,8 +3572,51 @@  static int hci_suspend_notifier(struct notifier_block *nb, unsigned long action,
 			goto done;
 	}
 
-	/* Suspend notifier should only act on events when powered. */
-	if (!hdev_is_powered(hdev))
+	powered = hdev_is_powered(hdev);
+
+	/* Update the suspend state when entering suspend if the system is
+	 * currently powered off or if it is powered on but was previously
+	 * powered off.
+	 */
+	if (action == PM_SUSPEND_PREPARE) {
+		/* Must hold dev lock when modifying suspend state. */
+		hci_dev_lock(hdev);
+		if (powered && hdev->suspend_state == BT_SUSPEND_POWERED_DOWN)
+			hdev->suspend_state = BT_RUNNING;
+		else if (!powered &&
+			 hdev->suspend_state != BT_SUSPEND_POWERED_DOWN)
+			hdev->suspend_state = BT_SUSPEND_POWERED_DOWN;
+
+		hci_dev_unlock(hdev);
+	}
+
+	/* When the power down quirk is set, we power down the adapter when
+	 * suspending and power it up when resuming. If the adapter was already
+	 * powered down before suspend, we don't do anything here.
+	 */
+	if (test_bit(HCI_QUIRK_POWER_DOWN_SYSTEM_SUSPEND, &hdev->quirks) &&
+	    hdev->suspend_state != BT_SUSPEND_POWERED_DOWN) {
+		if (action == PM_SUSPEND_PREPARE && powered) {
+			state = BT_SUSPEND_DO_POWER_DOWN;
+			ret = hci_change_suspend_state(hdev, state);
+
+			/* Emit that we're powering down for suspend */
+			hci_clear_wake_reason(hdev);
+			mgmt_suspending(hdev, state);
+			goto done;
+		} else if (action == PM_POST_SUSPEND && !powered) {
+			/* Emit that we're resuming before powering up. */
+			mgmt_resuming(hdev, hdev->wake_reason, &hdev->wake_addr,
+				      hdev->wake_addr_type);
+
+			state = BT_SUSPEND_DO_POWER_UP;
+			ret = hci_change_suspend_state(hdev, state);
+			goto done;
+		}
+	}
+
+	/* Skip to end if we weren't powered. */
+	if (!powered)
 		goto done;
 
 	if (action == PM_SUSPEND_PREPARE) {
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 048d4db9d4ea53..804bd0652edd1c 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -1194,6 +1194,7 @@  void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
 	struct hci_request req;
 	u8 page_scan;
 	int disconnect_counter;
+	int err;
 
 	if (next == hdev->suspend_state) {
 		bt_dev_dbg(hdev, "Same state before and after: %d", next);
@@ -1273,7 +1274,7 @@  void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
 		/* Pause scan changes again. */
 		hdev->scanning_paused = true;
 		hci_req_run(&req, suspend_req_complete);
-	} else {
+	} else if (next == BT_RUNNING) {
 		hdev->suspended = false;
 		hdev->scanning_paused = false;
 
@@ -1306,6 +1307,29 @@  void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
 		}
 
 		hci_req_run(&req, suspend_req_complete);
+	} else if (next == BT_SUSPEND_DO_POWER_DOWN) {
+		hdev->suspended = true;
+		hdev->scanning_paused = true;
+
+		err = hci_clean_up_state(hdev);
+
+		if (!err)
+			queue_delayed_work(hdev->req_workqueue,
+					   &hdev->power_off,
+					   SUSPEND_POWER_DOWN_TIMEOUT);
+
+		if (err == -ENODATA) {
+			cancel_delayed_work(&hdev->power_off);
+			queue_work(hdev->req_workqueue, &hdev->power_off.work);
+			err = 0;
+		}
+
+		set_bit(SUSPEND_POWERING_DOWN, hdev->suspend_tasks);
+	} else if (next == BT_SUSPEND_DO_POWER_UP) {
+		hdev->suspended = false;
+		hdev->scanning_paused = false;
+
+		queue_work(hdev->req_workqueue, &hdev->power_on);
 	}
 
 	hdev->suspend_state = next;