diff mbox series

bluetooth: fix potential gfp

Message ID 20210501150445.4055-1-paskripkin@gmail.com (mailing list archive)
State New, archived
Headers show
Series bluetooth: fix potential gfp | expand

Commit Message

Pavel Skripkin May 1, 2021, 3:04 p.m. UTC
In qca_power_shutdown() qcadev local variable is
initialized by hu->serdev.dev private data, but
hu->serdev can be NULL and there is a check for it.

Since, qcadev is not used before

	if (!hu->serdev)
		return;

we can move its initialization after this "if" to
prevent gfp.

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
---
 drivers/bluetooth/hci_qca.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

bluez.test.bot@gmail.com May 1, 2021, 4:14 p.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=476045

---Test result---

##############################
Test: CheckPatch - PASS


##############################
Test: CheckGitLint - FAIL
bluetooth: fix potential gfp
9: B3 Line contains hard tab characters (\t): "	if (!hu->serdev)"
10: B3 Line contains hard tab characters (\t): "		return;"


##############################
Test: CheckBuildK - PASS


##############################
Test: CheckTestRunner: Setup - PASS


##############################
Test: CheckTestRunner: l2cap-tester - PASS
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: bnep-tester - PASS
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: mgmt-tester - PASS
Total: 416, Passed: 399 (95.9%), Failed: 0, Not Run: 17

##############################
Test: CheckTestRunner: rfcomm-tester - PASS
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: sco-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: smp-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: CheckTestRunner: userchan-tester - PASS
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0



---
Regards,
Linux Bluetooth
Johan Hovold May 3, 2021, 7:57 a.m. UTC | #2
On Sat, May 01, 2021 at 06:04:45PM +0300, Pavel Skripkin wrote:
> In qca_power_shutdown() qcadev local variable is
> initialized by hu->serdev.dev private data, but
> hu->serdev can be NULL and there is a check for it.
> 
> Since, qcadev is not used before
> 
> 	if (!hu->serdev)
> 		return;
> 
> we can move its initialization after this "if" to
> prevent gfp.

Good catch. The commit message needs to be improved however.

First, what's a "gfp"? Did you mean GPF?

Second, I'd expect you to try to point to the commit that introduced
this issue (e.g. using a Fixes tag) and CC the person responsible. This
appears to be commit 5559904ccc08 ("Bluetooth: hci_qca: Add QCA Rome
power off support to the qca_power_shutdown()") but you should verify
that.

Third, this looks like it could be triggered by user space so you should
CC stable too so that the fix is backported.

Fourth, your commit summary (Subject) is missing the driver component
(i.e. "hci_qca").

> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> ---
>  drivers/bluetooth/hci_qca.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index de36af63e182..9589ef6c0c26 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1820,8 +1820,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
>  	unsigned long flags;
>  	enum qca_btsoc_type soc_type = qca_soc_type(hu);
>  
> -	qcadev = serdev_device_get_drvdata(hu->serdev);
> -
>  	/* From this point we go into power off state. But serial port is
>  	 * still open, stop queueing the IBS data and flush all the buffered
>  	 * data in skb's.
> @@ -1837,6 +1835,8 @@ static void qca_power_shutdown(struct hci_uart *hu)
>  	if (!hu->serdev)
>  		return;
>  
> +	qcadev = serdev_device_get_drvdata(hu->serdev);
> +
>  	if (qca_is_wcn399x(soc_type)) {
>  		host_set_baudrate(hu, 2400);
>  		qca_send_power_pulse(hu, false);

Johan
Pavel Skripkin May 3, 2021, 8:37 a.m. UTC | #3
Hi!

On Mon, 3 May 2021 09:57:12 +0200
Johan Hovold <johan@kernel.org> wrote:
> On Sat, May 01, 2021 at 06:04:45PM +0300, Pavel Skripkin wrote:
> > In qca_power_shutdown() qcadev local variable is
> > initialized by hu->serdev.dev private data, but
> > hu->serdev can be NULL and there is a check for it.
> > 
> > Since, qcadev is not used before
> > 
> > 	if (!hu->serdev)
> > 		return;
> > 
> > we can move its initialization after this "if" to
> > prevent gfp.
> 
> Good catch. The commit message needs to be improved however.
> 
> First, what's a "gfp"? Did you mean GPF?

Yes, it's typo :(

> 
> Second, I'd expect you to try to point to the commit that introduced
> this issue (e.g. using a Fixes tag) and CC the person responsible.
> This appears to be commit 5559904ccc08 ("Bluetooth: hci_qca: Add QCA
> Rome power off support to the qca_power_shutdown()") but you should
> verify that.
> 
> Third, this looks like it could be triggered by user space so you
> should CC stable too so that the fix is backported.
> 
> Fourth, your commit summary (Subject) is missing the driver component
> (i.e. "hci_qca").
>

Ok, I'll fix it all and send v2 soon.

Thanks for your feedback!

> > Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> > ---
> >  drivers/bluetooth/hci_qca.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/bluetooth/hci_qca.c
> > b/drivers/bluetooth/hci_qca.c index de36af63e182..9589ef6c0c26
> > 100644 --- a/drivers/bluetooth/hci_qca.c
> > +++ b/drivers/bluetooth/hci_qca.c
> > @@ -1820,8 +1820,6 @@ static void qca_power_shutdown(struct
> > hci_uart *hu) unsigned long flags;
> >  	enum qca_btsoc_type soc_type = qca_soc_type(hu);
> >  
> > -	qcadev = serdev_device_get_drvdata(hu->serdev);
> > -
> >  	/* From this point we go into power off state. But serial
> > port is
> >  	 * still open, stop queueing the IBS data and flush all
> > the buffered
> >  	 * data in skb's.
> > @@ -1837,6 +1835,8 @@ static void qca_power_shutdown(struct
> > hci_uart *hu) if (!hu->serdev)
> >  		return;
> >  
> > +	qcadev = serdev_device_get_drvdata(hu->serdev);
> > +
> >  	if (qca_is_wcn399x(soc_type)) {
> >  		host_set_baudrate(hu, 2400);
> >  		qca_send_power_pulse(hu, false);
> 
> Johan


With regards,
Pavel Skripkin
Marcel Holtmann May 7, 2021, 8:27 a.m. UTC | #4
Hi Pavel,

> In qca_power_shutdown() qcadev local variable is
> initialized by hu->serdev.dev private data, but
> hu->serdev can be NULL and there is a check for it.
> 
> Since, qcadev is not used before
> 
> 	if (!hu->serdev)
> 		return;
> 
> we can move its initialization after this "if" to
> prevent gfp.
> 
> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> ---
> drivers/bluetooth/hci_qca.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel
Johan Hovold May 7, 2021, 1:11 p.m. UTC | #5
On Fri, May 07, 2021 at 10:27:39AM +0200, Marcel Holtmann wrote:
> Hi Pavel,
> 
> > In qca_power_shutdown() qcadev local variable is
> > initialized by hu->serdev.dev private data, but
> > hu->serdev can be NULL and there is a check for it.
> > 
> > Since, qcadev is not used before
> > 
> > 	if (!hu->serdev)
> > 		return;
> > 
> > we can move its initialization after this "if" to
> > prevent gfp.
> > 
> > Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> > ---
> > drivers/bluetooth/hci_qca.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> 
> patch has been applied to bluetooth-next tree.

Why did you pick the v1 when it is clear from thread that a v2 has been
posted?

Johan
Marcel Holtmann May 7, 2021, 3:20 p.m. UTC | #6
Hi Johan,

>>> In qca_power_shutdown() qcadev local variable is
>>> initialized by hu->serdev.dev private data, but
>>> hu->serdev can be NULL and there is a check for it.
>>> 
>>> Since, qcadev is not used before
>>> 
>>> 	if (!hu->serdev)
>>> 		return;
>>> 
>>> we can move its initialization after this "if" to
>>> prevent gfp.
>>> 
>>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
>>> ---
>>> drivers/bluetooth/hci_qca.c | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>> 
>> patch has been applied to bluetooth-next tree.
> 
> Why did you pick the v1 when it is clear from thread that a v2 has been
> posted?

because I only saw that email after I applied the patch and the v2 is nowhere in sight as it seems. If it shows up, I replace this one then.

Regards

Marcel
Johan Hovold May 7, 2021, 3:30 p.m. UTC | #7
On Fri, May 07, 2021 at 05:20:11PM +0200, Marcel Holtmann wrote:
> Hi Johan,
> 
> >>> In qca_power_shutdown() qcadev local variable is
> >>> initialized by hu->serdev.dev private data, but
> >>> hu->serdev can be NULL and there is a check for it.
> >>> 
> >>> Since, qcadev is not used before
> >>> 
> >>> 	if (!hu->serdev)
> >>> 		return;
> >>> 
> >>> we can move its initialization after this "if" to
> >>> prevent gfp.
> >>> 
> >>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> >>> ---
> >>> drivers/bluetooth/hci_qca.c | 4 ++--
> >>> 1 file changed, 2 insertions(+), 2 deletions(-)
> >> 
> >> patch has been applied to bluetooth-next tree.
> > 
> > Why did you pick the v1 when it is clear from thread that a v2 has been
> > posted?
> 
> because I only saw that email after I applied the patch and the v2 is
> nowhere in sight as it seems. If it shows up, I replace this one then.

Here it is

	https://lore.kernel.org/lkml/20210503100605.5223-1-paskripkin@gmail.com/

Johan
Marcel Holtmann May 7, 2021, 4:07 p.m. UTC | #8
Hi Johan,

>>>>> In qca_power_shutdown() qcadev local variable is
>>>>> initialized by hu->serdev.dev private data, but
>>>>> hu->serdev can be NULL and there is a check for it.
>>>>> 
>>>>> Since, qcadev is not used before
>>>>> 
>>>>> 	if (!hu->serdev)
>>>>> 		return;
>>>>> 
>>>>> we can move its initialization after this "if" to
>>>>> prevent gfp.
>>>>> 
>>>>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
>>>>> ---
>>>>> drivers/bluetooth/hci_qca.c | 4 ++--
>>>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>> 
>>>> patch has been applied to bluetooth-next tree.
>>> 
>>> Why did you pick the v1 when it is clear from thread that a v2 has been
>>> posted?
>> 
>> because I only saw that email after I applied the patch and the v2 is
>> nowhere in sight as it seems. If it shows up, I replace this one then.
> 
> Here it is
> 
> 	https://lore.kernel.org/lkml/20210503100605.5223-1-paskripkin@gmail.com/

seems to have missed my inbox. Fixed now.

Regards

Marcel
Johan Hovold May 7, 2021, 4:16 p.m. UTC | #9
On Fri, May 07, 2021 at 06:07:50PM +0200, Marcel Holtmann wrote:
> Hi Johan,
> 
> >>>>> In qca_power_shutdown() qcadev local variable is
> >>>>> initialized by hu->serdev.dev private data, but
> >>>>> hu->serdev can be NULL and there is a check for it.
> >>>>> 
> >>>>> Since, qcadev is not used before
> >>>>> 
> >>>>> 	if (!hu->serdev)
> >>>>> 		return;
> >>>>> 
> >>>>> we can move its initialization after this "if" to
> >>>>> prevent gfp.
> >>>>> 
> >>>>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
> >>>>> ---
> >>>>> drivers/bluetooth/hci_qca.c | 4 ++--
> >>>>> 1 file changed, 2 insertions(+), 2 deletions(-)
> >>>> 
> >>>> patch has been applied to bluetooth-next tree.
> >>> 
> >>> Why did you pick the v1 when it is clear from thread that a v2 has been
> >>> posted?
> >> 
> >> because I only saw that email after I applied the patch and the v2 is
> >> nowhere in sight as it seems. If it shows up, I replace this one then.
> > 
> > Here it is
> > 
> > 	https://lore.kernel.org/lkml/20210503100605.5223-1-paskripkin@gmail.com/
> 
> seems to have missed my inbox. Fixed now.

Would you mind adding my Reviewed-by tag from the reply to that patch as
well?

I don't know if you're using b4 yet but it can be used to fetch it all
from lore.

Johan
Marcel Holtmann May 7, 2021, 7:22 p.m. UTC | #10
Hi Johan,

>>>>>>> In qca_power_shutdown() qcadev local variable is
>>>>>>> initialized by hu->serdev.dev private data, but
>>>>>>> hu->serdev can be NULL and there is a check for it.
>>>>>>> 
>>>>>>> Since, qcadev is not used before
>>>>>>> 
>>>>>>> 	if (!hu->serdev)
>>>>>>> 		return;
>>>>>>> 
>>>>>>> we can move its initialization after this "if" to
>>>>>>> prevent gfp.
>>>>>>> 
>>>>>>> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
>>>>>>> ---
>>>>>>> drivers/bluetooth/hci_qca.c | 4 ++--
>>>>>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>> 
>>>>>> patch has been applied to bluetooth-next tree.
>>>>> 
>>>>> Why did you pick the v1 when it is clear from thread that a v2 has been
>>>>> posted?
>>>> 
>>>> because I only saw that email after I applied the patch and the v2 is
>>>> nowhere in sight as it seems. If it shows up, I replace this one then.
>>> 
>>> Here it is
>>> 
>>> 	https://lore.kernel.org/lkml/20210503100605.5223-1-paskripkin@gmail.com/
>> 
>> seems to have missed my inbox. Fixed now.
> 
> Would you mind adding my Reviewed-by tag from the reply to that patch as
> well?

sure thing.

Regards

Marcel
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index de36af63e182..9589ef6c0c26 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1820,8 +1820,6 @@  static void qca_power_shutdown(struct hci_uart *hu)
 	unsigned long flags;
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 
-	qcadev = serdev_device_get_drvdata(hu->serdev);
-
 	/* From this point we go into power off state. But serial port is
 	 * still open, stop queueing the IBS data and flush all the buffered
 	 * data in skb's.
@@ -1837,6 +1835,8 @@  static void qca_power_shutdown(struct hci_uart *hu)
 	if (!hu->serdev)
 		return;
 
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+
 	if (qca_is_wcn399x(soc_type)) {
 		host_set_baudrate(hu, 2400);
 		qca_send_power_pulse(hu, false);