diff mbox series

[RFC,BlueZ,v3,1/2] emulator/btdev: Update the white list and resolving list size

Message ID 20210624003659.32410-1-hj.tedd.an@gmail.com (mailing list archive)
State Superseded
Headers show
Series [RFC,BlueZ,v3,1/2] emulator/btdev: Update the white list and resolving list size | expand

Commit Message

Tedd Ho-Jeong An June 24, 2021, 12:36 a.m. UTC
From: Tedd Ho-Jeong An <tedd.an@intel.com>

This patch updates the white list and resolving list size to small
number.
Also, it update the size of white list and resolving list to 1 more than
actual size when it is read via HCI read size commands. This is used to
simulate the case when the list is out of space.

Note that the read list size may not represent the current actual list
size depends on the device vendor.
---
 emulator/btdev.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

Comments

bluez.test.bot@gmail.com June 24, 2021, 1:19 a.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=506061

---Test result---

Test Summary:
CheckPatch                    PASS      1.02 seconds
GitLint                       PASS      0.21 seconds
Prep - Setup ELL              PASS      40.02 seconds
Build - Prep                  PASS      0.09 seconds
Build - Configure             PASS      7.00 seconds
Build - Make                  PASS      174.93 seconds
Make Check                    PASS      8.44 seconds
Make Distcheck                PASS      207.02 seconds
Build w/ext ELL - Configure   PASS      7.04 seconds
Build w/ext ELL - Make        PASS      164.28 seconds

Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint

##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree

##############################
Test: Make Check - PASS
Desc: Run 'make check'

##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution

##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration



---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/emulator/btdev.c b/emulator/btdev.c
index 90457a5aa..202fc7996 100644
--- a/emulator/btdev.c
+++ b/emulator/btdev.c
@@ -33,8 +33,8 @@ 
 #include "monitor/bt.h"
 #include "btdev.h"
 
-#define WL_SIZE			16
-#define RL_SIZE			16
+#define WL_SIZE			3
+#define RL_SIZE			3
 #define CIS_SIZE		3
 
 #define has_bredr(btdev)	(!((btdev)->features[4] & 0x20))
@@ -3402,7 +3402,12 @@  static int cmd_read_wl_size(struct btdev *dev, const void *data, uint8_t len)
 	struct bt_hci_rsp_le_read_white_list_size rsp;
 
 	rsp.status = BT_HCI_ERR_SUCCESS;
-	rsp.size = WL_SIZE;
+	/* The size is not fixed and the actual list size can be different from
+	 * the returned size here.
+	 * In order to test such cases, return more than allocated size, and
+	 * HCI Add device cmd will return the Memory Capacity Exceeded(0x07)
+	 */
+	rsp.size = WL_SIZE + 1;
 	cmd_complete(dev, BT_HCI_CMD_LE_READ_WHITE_LIST_SIZE, &rsp,
 						sizeof(rsp));
 
@@ -3687,7 +3692,12 @@  static int cmd_read_rl_size(struct btdev *dev, const void *data, uint8_t len)
 	struct bt_hci_rsp_le_read_resolv_list_size rsp;
 
 	rsp.status = BT_HCI_ERR_SUCCESS;
-	rsp.size = RL_SIZE;
+	/* The size is not fixed and the actual list size can be different from
+	 * the returned size here.
+	 * In order to test such cases, return more than allocated size, and
+	 * HCI Add device cmd will return the Memory Capacity Exceeded(0x07)
+	 */
+	rsp.size = RL_SIZE + 1;
 
 	cmd_complete(dev, BT_HCI_CMD_LE_READ_RESOLV_LIST_SIZE,
 							&rsp, sizeof(rsp));