| Message ID | 20210708131214.695458-1-aaron.ma@canonical.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Bluetooth: btusb: Add support for Foxconn Mediatek Chip | expand |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=512571 ---Test result--- Test Summary: CheckPatch PASS 0.45 seconds GitLint PASS 0.10 seconds BuildKernel PASS 512.42 seconds TestRunner: Setup PASS 339.61 seconds TestRunner: l2cap-tester PASS 2.52 seconds TestRunner: bnep-tester PASS 1.92 seconds TestRunner: mgmt-tester PASS 30.79 seconds TestRunner: rfcomm-tester PASS 2.10 seconds TestRunner: sco-tester PASS 2.05 seconds TestRunner: smp-tester FAIL 2.15 seconds TestRunner: userchan-tester PASS 1.95 seconds Details ############################## Test: CheckPatch - PASS - 0.45 seconds Run checkpatch.pl script with rule in .checkpatch.conf ############################## Test: GitLint - PASS - 0.10 seconds Run gitlint with rule in .gitlint ############################## Test: BuildKernel - PASS - 512.42 seconds Build Kernel with minimal configuration supports Bluetooth ############################## Test: TestRunner: Setup - PASS - 339.61 seconds Setup environment for running Test Runner ############################## Test: TestRunner: l2cap-tester - PASS - 2.52 seconds Run test-runner with l2cap-tester Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: bnep-tester - PASS - 1.92 seconds Run test-runner with bnep-tester Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: mgmt-tester - PASS - 30.79 seconds Run test-runner with mgmt-tester Total: 446, Passed: 443 (99.3%), Failed: 0, Not Run: 3 ############################## Test: TestRunner: rfcomm-tester - PASS - 2.10 seconds Run test-runner with rfcomm-tester Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: sco-tester - PASS - 2.05 seconds Run test-runner with sco-tester Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: smp-tester - FAIL - 2.15 seconds Run test-runner with smp-tester Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0 Failed Test Cases SMP Client - SC Request 2 Failed 0.024 seconds ############################## Test: TestRunner: userchan-tester - PASS - 1.95 seconds Run test-runner with userchan-tester Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 --- Regards, Linux Bluetooth
Hi Aaron, > Add support for another Foxconn / Hon Hai device with MT7921 chip. > > T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e0cd Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us > > Signed-off-by: Aaron Ma <aaron.ma@canonical.com> > --- > drivers/bluetooth/btusb.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index a9855a2dd561..240463d0e367 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -414,6 +414,9 @@ static const struct usb_device_id blacklist_table[] = { > { USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK | > BTUSB_WIDEBAND_SPEECH | > BTUSB_VALID_LE_STATES }, > + { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | > + BTUSB_WIDEBAND_SPEECH | > + BTUSB_VALID_LE_STATES }, patch doesn’t not apply cleanly to bluetooth-next tree, please rebase it. Regards Marcel
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a9855a2dd561..240463d0e367 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -414,6 +414,9 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, /* Additional Realtek 8723AE Bluetooth devices */ { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
Add support for another Foxconn / Hon Hai device with MT7921 chip. T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0cd Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Aaron Ma <aaron.ma@canonical.com> --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+)