| Message ID | 20210722054951.8291-2-ayush.garg@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support for connection specific LE PHY configuration | expand |
Hi Ayush, On Wed, Jul 21, 2021 at 11:03 PM Ayush Garg <ayush.garg@samsung.com> wrote: > > This will allow to set the LE PHY preferences for > a connected device. > > Reviewed-by: Anupam Roy <anupam.r@samsung.com> > --- > doc/device-api.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/doc/device-api.txt b/doc/device-api.txt > index 4e824d2de..d0e108f74 100644 > --- a/doc/device-api.txt > +++ b/doc/device-api.txt > @@ -272,3 +272,25 @@ Properties string Address [readonly] > Example: > <Transport Discovery> <Organization Flags...> > 0x26 0x01 0x01... > + > + array{string} Phy [readwrite, optional] > + > + PHY Preferences for a connected device. > + > + Note: The controller might not be able to make the > + change because of reasons like peer not supporting > + the requested PHY or it couldnot schedule due to > + other activites. > + > + This is only available for LE capable controllers. > + It will return Not Supported Otherwise. The property shall be omitted if LE is not enabled, I guess that was the intent of optional but saying it would return NotSupport means otherwise. > + > + Possible values: > + "LE1MTX" > + "LE1MRX" > + "LE2MTX" > + "LE2MRX" > + "LECODEDTX" > + "LECODEDRX" > + "LECODEDS2" > + "LECODEDS8" > -- > 2.17.1 I guess the intend here would be to have a prefered PHY for LE, but I wonder if this would really help since different profiles/service may have different preferences, also by being an array I assume one would need to the enter in the preferred order which should probably be stated and again depending on the use case this could be a config setting in main.conf instead so it is applied globally to all devices by drivers can overwrite it with their own preferences.
diff --git a/doc/device-api.txt b/doc/device-api.txt index 4e824d2de..d0e108f74 100644 --- a/doc/device-api.txt +++ b/doc/device-api.txt @@ -272,3 +272,25 @@ Properties string Address [readonly] Example: <Transport Discovery> <Organization Flags...> 0x26 0x01 0x01... + + array{string} Phy [readwrite, optional] + + PHY Preferences for a connected device. + + Note: The controller might not be able to make the + change because of reasons like peer not supporting + the requested PHY or it couldnot schedule due to + other activites. + + This is only available for LE capable controllers. + It will return Not Supported Otherwise. + + Possible values: + "LE1MTX" + "LE1MRX" + "LE2MTX" + "LE2MRX" + "LECODEDTX" + "LECODEDRX" + "LECODEDS2" + "LECODEDS8"
This will allow to set the LE PHY preferences for a connected device. Reviewed-by: Anupam Roy <anupam.r@samsung.com> --- doc/device-api.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)