diff mbox series

[RFC,v4,06/11] Bluetooth: btintel: Fix the LED is not turning off immediately

Message ID 20210727235127.173149-7-hj.tedd.an@gmail.com (mailing list archive)
State Superseded
Headers show
Series Bluetooth: btintel: Refactoring setup routines | expand

Commit Message

Tedd Ho-Jeong An July 27, 2021, 11:51 p.m. UTC 
From: Tedd Ho-Jeong An <tedd.an@intel.com>

Some platforms have an issue with BT LED when the interface is
down or BT radio is turned off, which takes 5 seconds to BT LED
goes off. This command turns off the BT LED immediately.

This patch sends the Intel vendor command to turn off the LED.

Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
---
 drivers/bluetooth/btintel.c | 17 +++++++++++++++++
 drivers/bluetooth/btintel.h |  1 +
 drivers/bluetooth/btusb.c   | 11 +++++++++--
 3 files changed, 27 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 65ecf2ae9a10..4e72d806387c 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -1757,7 +1757,9 @@  EXPORT_SYMBOL_GPL(btintel_setup_combined);
 
 int btintel_shutdown_combined(struct hci_dev *hdev)
 {
+	struct btintel_data *intel = hci_get_priv(hdev);
 	struct sk_buff *skb;
+	int ret;
 
 	/* Send HCI Reset to the controller to stop any BT activity which
 	 * were triggered. This will help to save power and maintain the
@@ -1770,6 +1772,21 @@  int btintel_shutdown_combined(struct hci_dev *hdev)
 	}
 	kfree_skb(skb);
 
+
+	/* Some platforms have an issue with BT LED when the interface is
+	 * down or BT radio is turned off, which takes 5 seconds to BT LED
+	 * goes off. This command turns off the BT LED immediately.
+	 */
+	if (test_bit(INTEL_BROKEN_LED, &intel->flags)) {
+		skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			ret = PTR_ERR(skb);
+			bt_dev_err(hdev, "turning off Intel device LED failed");
+			return ret;
+		}
+		kfree_skb(skb);
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(btintel_shutdown_combined);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 29b678364a79..4a35762c3220 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -144,6 +144,7 @@  struct intel_debug_features {
 #define INTEL_FIRMWARE_FAILED		3
 #define INTEL_BOOTING			4
 #define INTEL_BROKEN_READ_VERSION	5
+#define INTEL_BROKEN_LED		6
 
 struct btintel_data {
 	unsigned long flags;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 28ad13d6c032..542fe0196ac7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -63,6 +63,7 @@  static struct usb_driver btusb_driver;
 #define BTUSB_INTEL_NEWGEN	0x2000000
 #define BTUSB_INTEL_COMBINED	0x4000000
 #define BTUSB_INTEL_BROKEN_READ_VERSION 0x8000000
+#define BTUSB_INTEL_BROKEN_LED	0x10000000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -378,13 +379,16 @@  static const struct usb_device_id blacklist_table[] = {
 						     BTUSB_VALID_LE_STATES },
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_INTEL_BROKEN_READ_VERSION },
+						     BTUSB_INTEL_BROKEN_READ_VERSION |
+						     BTUSB_INTEL_BROKEN_LED },
 	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
-						     BTUSB_INTEL_BROKEN_READ_VERSION },
+						     BTUSB_INTEL_BROKEN_READ_VERSION |
+						     BTUSB_INTEL_BROKEN_LED },
 	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
 						     BTUSB_INTEL_BROKEN_READ_VERSION |
+						     BTUSB_INTEL_BROKEN_LED |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW |
 						     BTUSB_WIDEBAND_SPEECH |
@@ -4327,6 +4331,9 @@  static int btusb_probe(struct usb_interface *intf,
 
 		if (id->driver_info & BTUSB_INTEL_BROKEN_READ_VERSION)
 			btintel_set_flags(hdev, INTEL_BROKEN_READ_VERSION);
+
+		if (id->driver_info & BTUSB_INTEL_BROKEN_LED)
+			btintel_set_flags(hdev, INTEL_BROKEN_LED);
 	}
 
 	if (id->driver_info & BTUSB_INTEL_NEW) {