diff mbox series

[BlueZ] tools: userchan-tester: Add test case for the closing channel

Message ID 20210820045652.69761-1-hj.tedd.an@gmail.com (mailing list archive)
State Superseded
Headers show
Series [BlueZ] tools: userchan-tester: Add test case for the closing channel | expand

Commit Message

Tedd Ho-Jeong An Aug. 20, 2021, 4:56 a.m. UTC
From: Tedd Ho-Jeong An <tedd.an@intel.com>

This patch adds a test casse for checking the controller power state
after closing the user channel.

When the user channel is closed, the controller should be powered down
state.
---
 tools/userchan-tester.c | 70 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

Comments

bluez.test.bot@gmail.com Aug. 20, 2021, 5:36 a.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=534641

---Test result---

Test Summary:
CheckPatch                    PASS      0.38 seconds
GitLint                       PASS      0.13 seconds
Prep - Setup ELL              PASS      50.36 seconds
Build - Prep                  PASS      0.15 seconds
Build - Configure             PASS      9.09 seconds
Build - Make                  PASS      220.21 seconds
Make Check                    PASS      9.07 seconds
Make Distcheck                PASS      258.98 seconds
Build w/ext ELL - Configure   PASS      8.71 seconds
Build w/ext ELL - Make        PASS      207.69 seconds

Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf

##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint

##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL

##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build

##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree

##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree

##############################
Test: Make Check - PASS
Desc: Run 'make check'

##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution

##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration

##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration



---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/tools/userchan-tester.c b/tools/userchan-tester.c
index c17644fb8..ab95c0044 100644
--- a/tools/userchan-tester.c
+++ b/tools/userchan-tester.c
@@ -40,6 +40,8 @@  struct test_data {
 	enum hciemu_type hciemu_type;
 	const void *test_data;
 	unsigned int remove_id;
+	struct bt_hci *hci;
+	uint32_t current_settings;
 };
 
 static void mgmt_debug(const char *str, void *user_data)
@@ -81,6 +83,8 @@  static void read_info_callback(uint8_t status, uint16_t length,
 	tester_print("  Name: %s", rp->name);
 	tester_print("  Short name: %s", rp->short_name);
 
+	data->current_settings = current_settings;
+
 	if (strcmp(hciemu_get_address(data->hciemu), addr)) {
 		tester_pre_setup_failed();
 		return;
@@ -291,6 +295,69 @@  static void test_open_failed(const void *test_data)
 	tester_test_failed();
 }
 
+static void close_read_info_callback(uint8_t status, uint16_t length,
+					const void *param, void *user_data)
+{
+	const struct mgmt_rp_read_info *rp = param;
+	uint32_t current_settings;
+
+	tester_print("Read Info callback");
+	tester_print("  Status: 0x%02x", status);
+
+	if (status || !param) {
+		tester_test_failed();
+		return;
+	}
+
+	current_settings = btohl(rp->current_settings);
+
+	if (!(current_settings & MGMT_SETTING_POWERED)) {
+		tester_print("Controller is powered");
+		tester_test_failed();
+		return;
+	}
+
+	tester_test_passed();
+}
+
+static void setup_channel_open(const void *test_data)
+{
+	struct test_data *data = tester_get_data();
+
+	/* Check power off */
+	if (data->current_settings & MGMT_SETTING_POWERED) {
+		tester_print("Controller is powered");
+		tester_setup_failed();
+		return;
+	}
+
+	/* Open Channel */
+	data->hci = bt_hci_new_user_channel(data->mgmt_index);
+	if (!data->hci) {
+		mgmt_unregister(data->mgmt, data->remove_id);
+		data->remove_id = 0;
+
+		tester_setup_failed();
+		return;
+	}
+
+	tester_print("User Channel Opened");
+
+	tester_setup_complete();
+}
+
+static void test_close_success(const void *test_data)
+{
+	struct test_data *data = tester_get_data();
+
+	tester_print("Close User Channel");
+	bt_hci_unref(data->hci);
+
+	/* Check if power is off */
+	mgmt_send(data->mgmt, MGMT_OP_READ_INFO, data->mgmt_index, 0, NULL,
+					close_read_info_callback, NULL, NULL);
+}
+
 #define test_user(name, data, setup, func) \
 	do { \
 		struct test_data *user; \
@@ -316,6 +383,9 @@  int main(int argc, char *argv[])
 					setup_powered, test_open_failed);
 	test_user("User channel open - Power Toggle Success", INT_TO_PTR(true),
 					toggle_powered, test_open_success);
+	test_user("User channel close - Success", NULL,
+					setup_channel_open, test_close_success);
+
 
 	return tester_run();
 }