diff mbox series

Bluetooth: btusb: btrtl: Add the new support ID for Realtek RTL8852A

Message ID 20210901074845.1000-1-max.chou@realtek.com (mailing list archive)
State New, archived
Headers show
Series Bluetooth: btusb: btrtl: Add the new support ID for Realtek RTL8852A | expand

Commit Message

Max Chou Sept. 1, 2021, 7:48 a.m. UTC
From: Max Chou <max.chou@realtek.com>

Add the new support ID(0x04c5, 0x165c) to usb_device_id table for
Realtek RTL8852A.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04c5 ProdID=165c Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Max Chou <max.chou@realtek.com>
Reviewed-by: Christian Bauer <christian.bauer1.external@fujitsu.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Marcel Holtmann Sept. 1, 2021, 8 a.m. UTC | #1
Hi Max,

> Add the new support ID(0x04c5, 0x165c) to usb_device_id table for
> Realtek RTL8852A.
> 
> The device info from /sys/kernel/debug/usb/devices as below.
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
> D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=04c5 ProdID=165c Rev= 0.00
> S:  Manufacturer=Realtek
> S:  Product=Bluetooth Radio
> S:  SerialNumber=00e04c000001
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> 
> Signed-off-by: Max Chou <max.chou@realtek.com>
> Reviewed-by: Christian Bauer <christian.bauer1.external@fujitsu.com>
> ---
> drivers/bluetooth/btusb.c | 2 ++
> 1 file changed, 2 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel
bluez.test.bot@gmail.com Sept. 1, 2021, 9:06 a.m. UTC | #2
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=540377

---Test result---

Test Summary:
CheckPatch                    PASS      0.49 seconds
GitLint                       PASS      0.11 seconds
BuildKernel                   PASS      590.74 seconds
TestRunner: Setup             PASS      377.91 seconds
TestRunner: l2cap-tester      PASS      2.87 seconds
TestRunner: bnep-tester       PASS      1.93 seconds
TestRunner: mgmt-tester       PASS      33.50 seconds
TestRunner: rfcomm-tester     PASS      2.18 seconds
TestRunner: sco-tester        PASS      2.14 seconds
TestRunner: smp-tester        PASS      2.28 seconds
TestRunner: userchan-tester   PASS      1.95 seconds

Details
##############################
Test: CheckPatch - PASS - 0.49 seconds
Run checkpatch.pl script with rule in .checkpatch.conf


##############################
Test: GitLint - PASS - 0.11 seconds
Run gitlint with rule in .gitlint


##############################
Test: BuildKernel - PASS - 590.74 seconds
Build Kernel with minimal configuration supports Bluetooth


##############################
Test: TestRunner: Setup - PASS - 377.91 seconds
Setup environment for running Test Runner


##############################
Test: TestRunner: l2cap-tester - PASS - 2.87 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: bnep-tester - PASS - 1.93 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: mgmt-tester - PASS - 33.50 seconds
Run test-runner with mgmt-tester
Total: 452, Passed: 452 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: rfcomm-tester - PASS - 2.18 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: sco-tester - PASS - 2.14 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: smp-tester - PASS - 2.28 seconds
Run test-runner with smp-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: userchan-tester - PASS - 1.95 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0



---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 60d2fce59a71..ccc956290e8d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -384,6 +384,8 @@  static const struct usb_device_id blacklist_table[] = {
 	/* Realtek 8852AE Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek Bluetooth devices */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),