diff mbox series

[v3,4/4] Bluetooth: hci_sync: Set Privacy Mode when updating the resolving list

Message ID 20211120012448.1476960-4-luiz.dentz@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v3,1/4] Bluetooth: MGMT: Use hci_dev_test_and_{set,clear}_flag | expand

Checks

Context Check Description
tedd_an/checkpatch success Checkpatch PASS
tedd_an/gitlint success Gitlint PASS

Commit Message

Luiz Augusto von Dentz Nov. 20, 2021, 1:24 a.m. UTC 
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds support for Set Privacy Mode when updating the resolving list
when HCI_CONN_FLAG_DEVICE_PRIVACY so the controller shall use Device
Mode for devices programmed in the resolving list, Device Mode is
actually required when the remote device are not able to use RPA as
otherwise the default mode is Network Privacy Mode in which only
allows RPAs thus the controller would filter out advertisement using
identity addresses for which there is an IRK.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci.h      | 10 +++++++
 include/net/bluetooth/hci_core.h |  1 +
 net/bluetooth/hci_event.c        | 29 ++++++++++++++++++
 net/bluetooth/hci_sync.c         | 51 ++++++++++++++++++++++++++++----
 4 files changed, 85 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 84db6b275231..7444d286e6be 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1931,6 +1931,16 @@  struct hci_rp_le_read_transmit_power {
 	__s8  max_le_tx_power;
 } __packed;
 
+#define HCI_NETWORK_PRIVACY		0x00
+#define HCI_DEVICE_PRIVACY		0x01
+
+#define HCI_OP_LE_SET_PRIVACY_MODE	0x204e
+struct hci_cp_le_set_privacy_mode {
+	__u8  bdaddr_type;
+	bdaddr_t  bdaddr;
+	__u8  mode;
+} __packed;
+
 #define HCI_OP_LE_READ_BUFFER_SIZE_V2	0x2060
 struct hci_rp_le_read_buffer_size_v2 {
 	__u8    status;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 9c94d1c49b25..427c5af9eb41 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -756,6 +756,7 @@  struct hci_conn_params {
 	struct hci_conn *conn;
 	bool explicit_connect;
 	DECLARE_BITMAP(flags, __HCI_CONN_NUM_FLAGS);
+	u8  privacy_mode;
 };
 
 extern struct list_head hci_dev_list;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index efc5458b1345..51c88f4f1274 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1300,6 +1300,31 @@  static void hci_cc_le_read_transmit_power(struct hci_dev *hdev,
 	hdev->max_le_tx_power = rp->max_le_tx_power;
 }
 
+static void hci_cc_le_set_privacy_mode(struct hci_dev *hdev,
+				       struct sk_buff *skb)
+{
+	__u8 status = *((__u8 *)skb->data);
+	struct hci_cp_le_set_privacy_mode *cp;
+	struct hci_conn_params *params;
+
+	bt_dev_dbg(hdev, "status 0x%2.2x", status);
+
+	if (status)
+		return;
+
+	cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_PRIVACY_MODE);
+	if (!cp)
+		return;
+
+	hci_dev_lock(hdev);
+
+	params = hci_conn_params_lookup(hdev, &cp->bdaddr, cp->bdaddr_type);
+	if (params)
+		params->privacy_mode = cp->mode;
+
+	hci_dev_unlock(hdev);
+}
+
 static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	__u8 *sent, status = *((__u8 *) skb->data);
@@ -3812,6 +3837,10 @@  static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
 		hci_cc_le_read_transmit_power(hdev, skb);
 		break;
 
+	case HCI_OP_LE_SET_PRIVACY_MODE:
+		hci_cc_le_set_privacy_mode(hdev, skb);
+		break;
+
 	default:
 		BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode);
 		break;
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 5f44ff0b8910..eada6a39068e 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -1580,8 +1580,40 @@  static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
 				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
 }
 
+/* Set Device Privacy Mode. */
+static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
+					struct hci_conn_params *params)
+{
+	struct hci_cp_le_set_privacy_mode cp;
+	struct smp_irk *irk;
+
+	/* If device privacy mode has already been set there is nothing to do */
+	if (params->privacy_mode == HCI_DEVICE_PRIVACY)
+		return 0;
+
+	/* Check if HCI_CONN_FLAG_DEVICE_PRIVACY has been set as it also
+	 * indicates that LL Privacy has been enabled and
+	 * HCI_OP_LE_SET_PRIVACY_MODE is supported.
+	 */
+	if (!test_bit(HCI_CONN_FLAG_DEVICE_PRIVACY, params->flags))
+		return 0;
+
+	irk = hci_find_irk_by_addr(hdev, &params->addr, params->addr_type);
+	if (!irk)
+		return 0;
+
+	memset(&cp, 0, sizeof(cp));
+	cp.bdaddr_type = irk->addr_type;
+	bacpy(&cp.bdaddr, &irk->bdaddr);
+	cp.mode = HCI_DEVICE_PRIVACY;
+
+	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PRIVACY_MODE,
+				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+}
+
 /* Adds connection to allow list if needed, if the device uses RPA (has IRK)
- * this attempts to program the device in the resolving list as well.
+ * this attempts to program the device in the resolving list as well and
+ * properly set the privacy mode.
  */
 static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
 				       struct hci_conn_params *params,
@@ -1590,11 +1622,6 @@  static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
 	struct hci_cp_le_add_to_accept_list cp;
 	int err;
 
-	/* Already in accept list */
-	if (hci_bdaddr_list_lookup(&hdev->le_accept_list, &params->addr,
-				   params->addr_type))
-		return 0;
-
 	/* Select filter policy to accept all advertising */
 	if (*num_entries >= hdev->le_accept_list_size)
 		return -ENOSPC;
@@ -1620,6 +1647,18 @@  static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
 		return err;
 	}
 
+	/* Set Privacy Mode */
+	err = hci_le_set_privacy_mode_sync(hdev, params);
+	if (err) {
+		bt_dev_err(hdev, "Unable to set privacy mode: %d", err);
+		return err;
+	}
+
+	/* Check if already in accept list */
+	if (hci_bdaddr_list_lookup(&hdev->le_accept_list, &params->addr,
+				   params->addr_type))
+		return 0;
+
 	*num_entries += 1;
 	cp.bdaddr_type = params->addr_type;
 	bacpy(&cp.bdaddr, &params->addr);