@@ -6156,6 +6156,23 @@ static void setup_pairing_acceptor(const void *test_data)
setup_bthost();
}
+/* Generic callback for checking the mgmt evnet status
+ */
+static void generic_mgmt_status_callback(uint8_t status, uint16_t length,
+ const void *param, void *user_data)
+{
+ bool bthost = PTR_TO_INT(user_data);
+
+ if (status != MGMT_STATUS_SUCCESS) {
+ tester_setup_failed();
+ return;
+ }
+
+ if (bthost)
+ setup_bthost();
+}
+
+
static void setup_powered_callback(uint8_t status, uint16_t length,
const void *param, void *user_data)
{
@@ -6990,6 +7007,66 @@ static void setup_ext_adv_params(const void *test_data)
NULL, NULL);
}
+static const uint8_t hci_set_ext_adv_data_name[] = {
+ 0x01, /* Handle */
+ 0x03, /* Operation */
+ 0x01, /* Complete name */
+ 0x06, 0x05, 0x08, 0x74, 0x65, 0x73, 0x74
+};
+
+static const struct generic_data add_ext_adv_scan_resp_off_on = {
+ .send_opcode = MGMT_OP_ADD_EXT_ADV_DATA,
+ .send_param = ext_adv_data_valid,
+ .send_len = sizeof(ext_adv_data_valid),
+ .expect_status = MGMT_STATUS_SUCCESS,
+ .expect_param = ext_adv_data_mgmt_rsp_valid,
+ .expect_len = sizeof(ext_adv_data_mgmt_rsp_valid),
+ .expect_hci_command = BT_HCI_CMD_LE_SET_EXT_SCAN_RSP_DATA,
+ .expect_hci_param = hci_set_ext_adv_data_name,
+ .expect_hci_len = sizeof(hci_set_ext_adv_data_name),
+};
+
+static void setup_add_ext_adv_on_off(const void *test_data)
+{
+ struct test_data *data = tester_get_data();
+ unsigned char param[] = { 0x01 };
+ int enable_bthost = 1;
+
+ mgmt_send(data->mgmt, MGMT_OP_SET_LE, data->mgmt_index,
+ sizeof(param), ¶m,
+ NULL, NULL, NULL);
+
+ mgmt_send(data->mgmt, MGMT_OP_SET_POWERED, data->mgmt_index,
+ sizeof(param), ¶m,
+ generic_mgmt_status_callback,
+ NULL, NULL);
+
+ mgmt_send(data->mgmt, MGMT_OP_ADD_EXT_ADV_PARAMS, data->mgmt_index,
+ sizeof(ext_adv_params_valid),
+ &ext_adv_params_valid,
+ generic_mgmt_status_callback,
+ NULL, NULL);
+
+ mgmt_send(data->mgmt, MGMT_OP_ADD_EXT_ADV_DATA, data->mgmt_index,
+ sizeof(ext_adv_data_valid),
+ &ext_adv_data_valid,
+ generic_mgmt_status_callback,
+ NULL, NULL);
+
+ mgmt_send(data->mgmt, MGMT_OP_REMOVE_ADVERTISING, data->mgmt_index,
+ sizeof(remove_advertising_param_1),
+ &remove_advertising_param_1,
+ generic_mgmt_status_callback,
+ NULL, NULL);
+
+ mgmt_send(data->mgmt, MGMT_OP_ADD_EXT_ADV_PARAMS, data->mgmt_index,
+ sizeof(ext_adv_params_valid),
+ &ext_adv_params_valid,
+ generic_mgmt_status_callback,
+ INT_TO_PTR(enable_bthost), NULL);
+
+}
+
static void pin_code_request_callback(uint16_t index, uint16_t length,
const void *param, void *user_data)
{
@@ -13960,11 +14037,17 @@ int main(int argc, char *argv[])
setup_ext_adv_params,
test_command_generic);
- test_bredrle50("zxcv Ext Adv MGMT - AD Scan Response (5.0) Success",
+ test_bredrle50("Ext Adv MGMT - AD Scan Response (5.0) Success",
&adv_scan_rsp_success,
setup_ext_adv_params,
test_command_generic);
+ test_bredrle50("Ext Adv MGMT - AD Scan Resp - Off and On",
+ &add_ext_adv_scan_resp_off_on,
+ setup_add_ext_adv_on_off,
+ test_command_generic);
+
+
/* MGMT_OP_SET_DEVICE_ID
* Using Bluetooth SIG for source.
*/
From: Tedd Ho-Jeong An <tedd.an@intel.com> This patch adds a test case to test if the scan response data is updated when the following scenarios are performed. 1. Add Extended Advertising Parameters Command 2. Add Extended Advertising Data Command w/ Scan Resp Data 3. Remove Advertising Command 4. Add Extended Advertising Parameters Command 5. Add Extended Advertising Data Command w/ Scan Resp Data 6. Host should set Scan Resp Data --- tools/mgmt-tester.c | 85 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 84 insertions(+), 1 deletion(-)