diff mbox series

[RESEND] Bluetooth: btrtl: Add support for RTL8852BS

Message ID 20230206063334.45861-1-victor@allwinnertech.com (mailing list archive)
State Superseded
Headers show
Series [RESEND] Bluetooth: btrtl: Add support for RTL8852BS | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/CheckPatch success CheckPatch PASS
tedd_an/GitLint success Gitlint PASS
tedd_an/SubjectPrefix success Gitlint PASS
tedd_an/BuildKernel success BuildKernel PASS
tedd_an/CheckAllWarning success CheckAllWarning PASS
tedd_an/CheckSparse warning CheckSparse WARNING drivers/bluetooth/btrtl.c: note: in included file:drivers/bluetooth/btrtl.h:47:45: warning: array of flexible structures
tedd_an/CheckSmatch warning CheckSparse WARNING drivers/bluetooth/btrtl.c: note: in included file:drivers/bluetooth/btrtl.h:47:45: warning: array of flexible structures
tedd_an/BuildKernel32 success BuildKernel32 PASS
tedd_an/TestRunnerSetup success TestRunnerSetup PASS
tedd_an/TestRunner_l2cap-tester success TestRunner PASS
tedd_an/TestRunner_iso-tester success TestRunner PASS
tedd_an/TestRunner_bnep-tester success TestRunner PASS
tedd_an/TestRunner_mgmt-tester success TestRunner PASS
tedd_an/TestRunner_rfcomm-tester success TestRunner PASS
tedd_an/TestRunner_sco-tester success TestRunner PASS
tedd_an/TestRunner_ioctl-tester success TestRunner PASS
tedd_an/TestRunner_mesh-tester success TestRunner PASS
tedd_an/TestRunner_smp-tester success TestRunner PASS
tedd_an/TestRunner_userchan-tester success TestRunner PASS
tedd_an/IncrementalBuild success Incremental Build PASS

Commit Message

Victor Hassan Feb. 6, 2023, 6:33 a.m. UTC
Add the support for RTL8852BS BT controller on UART interface.
The necessary firmware file will be submitted to linux-firmware.

Signed-off-by: Victor Hassan <victor@allwinnertech.com>
---
 drivers/bluetooth/btrtl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

bluez.test.bot@gmail.com Feb. 6, 2023, 7:01 a.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=719009

---Test result---

Test Summary:
CheckPatch                    PASS      0.98 seconds
GitLint                       PASS      0.37 seconds
SubjectPrefix                 PASS      0.11 seconds
BuildKernel                   PASS      31.72 seconds
CheckAllWarning               PASS      34.55 seconds
CheckSparse                   WARNING   38.58 seconds
CheckSmatch                   WARNING   107.40 seconds
BuildKernel32                 PASS      30.13 seconds
TestRunnerSetup               PASS      434.48 seconds
TestRunner_l2cap-tester       PASS      16.45 seconds
TestRunner_iso-tester         PASS      16.78 seconds
TestRunner_bnep-tester        PASS      5.42 seconds
TestRunner_mgmt-tester        PASS      109.76 seconds
TestRunner_rfcomm-tester      PASS      8.72 seconds
TestRunner_sco-tester         PASS      8.08 seconds
TestRunner_ioctl-tester       PASS      9.43 seconds
TestRunner_mesh-tester        PASS      6.93 seconds
TestRunner_smp-tester         PASS      7.90 seconds
TestRunner_userchan-tester    PASS      5.72 seconds
IncrementalBuild              PASS      28.52 seconds

Details
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:
drivers/bluetooth/btrtl.c: note: in included file:drivers/bluetooth/btrtl.h:47:45: warning: array of flexible structures
##############################
Test: CheckSmatch - WARNING
Desc: Run smatch tool with source
Output:
drivers/bluetooth/btrtl.c: note: in included file:drivers/bluetooth/btrtl.h:47:45: warning: array of flexible structures


---
Regards,
Linux Bluetooth
Paul Menzel Feb. 6, 2023, 10:03 a.m. UTC | #2
Dear Victor,


Thank you for your patch.

Am 06.02.23 um 07:33 schrieb Victor Hassan:
> Add the support for RTL8852BS BT controller on UART interface.
> The necessary firmware file will be submitted to linux-firmware.
> 
> Signed-off-by: Victor Hassan <victor@allwinnertech.com>
> ---
>   drivers/bluetooth/btrtl.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index 69c3fe649ca7..36c3a23324f8 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -198,6 +198,14 @@ static const struct id_table ic_id_table[] = {
>   	  .fw_name  = "rtl_bt/rtl8852bu_fw.bin",
>   	  .cfg_name = "rtl_bt/rtl8852bu_config" },
>   
> +	/* 8852B with UART interface */
> +	{ IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
> +	  .config_needed = true,
> +	  .has_rom_version = true,
> +	  .has_msft_ext = true,
> +	  .fw_name  = "rtl_bt/rtl8852bs_fw.bin",
> +	  .cfg_name = "rtl_bt/rtl8852bs_config" },
> +

I’d sort *bs* before *bu*.

>   	/* 8852C */
>   	{ IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
>   	  .config_needed = false,
> @@ -965,5 +973,7 @@ MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");

Ditto.


Kind regards,

Paul
Victor Hassan Feb. 14, 2023, 6:23 a.m. UTC | #3
Dear Paul:
   Thank you for your advises. I had send PATCH-v2 to fix it. Can you 
give me more advises?

On 2023/2/6 18:03, Paul Menzel wrote:
> Dear Victor,
> 
> 
> Thank you for your patch.
> 
> Am 06.02.23 um 07:33 schrieb Victor Hassan:
>> Add the support for RTL8852BS BT controller on UART interface.
>> The necessary firmware file will be submitted to linux-firmware.
>>
>> Signed-off-by: Victor Hassan <victor@allwinnertech.com>
>> ---
>>   drivers/bluetooth/btrtl.c | 10 ++++++++++
>>   1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
>> index 69c3fe649ca7..36c3a23324f8 100644
>> --- a/drivers/bluetooth/btrtl.c
>> +++ b/drivers/bluetooth/btrtl.c
>> @@ -198,6 +198,14 @@ static const struct id_table ic_id_table[] = {
>>         .fw_name  = "rtl_bt/rtl8852bu_fw.bin",
>>         .cfg_name = "rtl_bt/rtl8852bu_config" },
>> +    /* 8852B with UART interface */
>> +    { IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
>> +      .config_needed = true,
>> +      .has_rom_version = true,
>> +      .has_msft_ext = true,
>> +      .fw_name  = "rtl_bt/rtl8852bs_fw.bin",
>> +      .cfg_name = "rtl_bt/rtl8852bs_config" },
>> +
> 
> I’d sort *bs* before *bu*.
> 
>>       /* 8852C */
>>       { IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
>>         .config_needed = false,
>> @@ -965,5 +973,7 @@ MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
>> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
>> +MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
>>   MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
> 
> Ditto.
> 
> 
> Kind regards,
> 
> Paul
diff mbox series

Patch

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 69c3fe649ca7..36c3a23324f8 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -198,6 +198,14 @@  static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8852bu_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8852bu_config" },
 
+	/* 8852B with UART interface */
+	{ IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8852bs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8852bs_config" },
+
 	/* 8852C */
 	{ IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
 	  .config_needed = false,
@@ -965,5 +973,7 @@  MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");