[RESEND,v2] Bluetooth: btrtl: Add support for RTL8852BS

Commit Message

Victor Hassan Feb. 22, 2023, 9:47 a.m. UTC

Add the support for RTL8852BS BT controller on UART interface.
The necessary firmware file will be submitted to linux-firmware.

Signed-off-by: Victor Hassan <[e-mail]>
---
 drivers/bluetooth/btrtl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

[e-mail] Feb. 22, 2023, 10:34 a.m. UTC | #1

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=724009

---Test result---

Test Summary:
CheckPatch                    PASS      0.67 seconds
GitLint                       PASS      0.34 seconds
SubjectPrefix                 PASS      0.12 seconds
BuildKernel                   PASS      30.77 seconds
CheckAllWarning               PASS      33.88 seconds
CheckSparse                   WARNING   38.30 seconds
CheckSmatch                   WARNING   106.57 seconds
BuildKernel32                 PASS      29.82 seconds
TestRunnerSetup               PASS      429.32 seconds
TestRunner_l2cap-tester       PASS      15.83 seconds
TestRunner_iso-tester         PASS      16.17 seconds
TestRunner_bnep-tester        PASS      5.37 seconds
TestRunner_mgmt-tester        PASS      106.26 seconds
TestRunner_rfcomm-tester      PASS      8.55 seconds
TestRunner_sco-tester         PASS      7.87 seconds
TestRunner_ioctl-tester       PASS      9.10 seconds
TestRunner_mesh-tester        PASS      6.71 seconds
TestRunner_smp-tester         PASS      7.76 seconds
TestRunner_userchan-tester    PASS      5.56 seconds
IncrementalBuild              PASS      28.02 seconds

Details
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:
drivers/bluetooth/btrtl.c: note: in included file:drivers/bluetooth/btrtl.h:47:45: warning: array of flexible structures
##############################
Test: CheckSmatch - WARNING
Desc: Run smatch tool with source
Output:
drivers/bluetooth/btrtl.c: note: in included file:drivers/bluetooth/btrtl.h:47:45: warning: array of flexible structures


---
Regards,
Linux Bluetooth

[e-mail] Feb. 23, 2023, 8:30 p.m. UTC | #2

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <[e-mail]>:

On Wed, 22 Feb 2023 17:47:20 +0800 you wrote:
> Add the support for RTL8852BS BT controller on UART interface.
> The necessary firmware file will be submitted to linux-firmware.
> 
> Signed-off-by: Victor Hassan <[e-mail]>
> ---
>  drivers/bluetooth/btrtl.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)

Here is the summary with links:
  - [RESEND,v2] Bluetooth: btrtl: Add support for RTL8852BS
    https://git.kernel.org/bluetooth/bluetooth-next/c/1fb7281c62c9

You are awesome, thank you!

Patch

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 69c3fe649ca7..aee75f278e60 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -190,6 +190,14 @@  static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8852au_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8852au_config" },
 
+	/* 8852B with UART interface */
+	{ IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8852bs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8852bs_config" },
+
 	/* 8852B */
 	{ IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_USB),
 	  .config_needed = false,
@@ -963,6 +971,8 @@  MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");