diff mbox series

[v8,3/4] arm64: dts: qcom: sc8280xp: Define uart2

Message ID 20230326233812.28058-4-steev@kali.org (mailing list archive)
State New, archived
Headers show
Series Add WCN6855 Bluetooth support | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/CheckPatch warning WARNING: line length of 109 exceeds 100 columns #149: FILE: arch/arm64/boot/dts/qcom/sc8280xp.dtsi:1220: + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, WARNING: line length of 105 exceeds 100 columns #150: FILE: arch/arm64/boot/dts/qcom/sc8280xp.dtsi:1221: + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; total: 0 errors, 2 warnings, 20 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. /github/workspace/src/src/13188465.patch has style problems, please review. NOTE: Ignored message types: UNKNOWN_COMMIT_ID NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS.
tedd_an/GitLint success Gitlint PASS
tedd_an/SubjectPrefix fail "Bluetooth: " prefix is not specified in the subject
tedd_an/IncrementalBuild success Incremental Build PASS

Commit Message

Steev Klimaszewski March 26, 2023, 11:38 p.m. UTC 
From: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the definition for uart2 for sc8280xp devices.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
Changes since v7:
 * No changes

Changes since v6:
 * No changes

Changes since v5:
 * Add sentence to git commit description.
 * Add Johan's R-b

Changes since v4:
 * None

Changes since v3:
 * Fix commit message changelog

Changes since v2:
 * No changes since v2

Changes since v1:
 * change subject line, move node, and add my s-o-b

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 05544a6c1b21..f1d0e8d5edd2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1209,6 +1209,20 @@  spi2: spi@988000 {
 				status = "disabled";
 			};
 
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
 			i2c3: i2c@98c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0098c000 0 0x4000>;