| Message ID | 20230707062959.30371-1-chris.lu@mediatek.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 159c43e9925e8f4655b8f834cbb864f5ecaf1778 |
| Headers | show |
| Series | [v3,1/2] Bluetooth: btusb: Add new VID/PID 0489/e102 for MT7922 | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | success | Success |
| tedd_an/CheckPatch | success | CheckPatch PASS |
| tedd_an/GitLint | success | Gitlint PASS |
| tedd_an/SubjectPrefix | success | Gitlint PASS |
| tedd_an/BuildKernel | success | BuildKernel PASS |
| tedd_an/CheckAllWarning | success | CheckAllWarning PASS |
| tedd_an/CheckSparse | success | CheckSparse PASS |
| tedd_an/CheckSmatch | success | CheckSparse PASS |
| tedd_an/BuildKernel32 | success | BuildKernel32 PASS |
| tedd_an/TestRunnerSetup | success | TestRunnerSetup PASS |
| tedd_an/TestRunner_l2cap-tester | success | TestRunner PASS |
| tedd_an/TestRunner_iso-tester | success | TestRunner PASS |
| tedd_an/TestRunner_bnep-tester | success | TestRunner PASS |
| tedd_an/TestRunner_mgmt-tester | success | TestRunner PASS |
| tedd_an/TestRunner_rfcomm-tester | success | TestRunner PASS |
| tedd_an/TestRunner_sco-tester | success | TestRunner PASS |
| tedd_an/TestRunner_ioctl-tester | success | TestRunner PASS |
| tedd_an/TestRunner_mesh-tester | success | TestRunner PASS |
| tedd_an/TestRunner_smp-tester | success | TestRunner PASS |
| tedd_an/TestRunner_userchan-tester | success | TestRunner PASS |
| tedd_an/IncrementalBuild | success | Incremental Build PASS |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=763319 ---Test result--- Test Summary: CheckPatch PASS 1.14 seconds GitLint PASS 0.53 seconds SubjectPrefix PASS 0.17 seconds BuildKernel PASS 32.22 seconds CheckAllWarning PASS 35.70 seconds CheckSparse PASS 40.73 seconds CheckSmatch PASS 112.46 seconds BuildKernel32 PASS 31.40 seconds TestRunnerSetup PASS 478.00 seconds TestRunner_l2cap-tester PASS 22.76 seconds TestRunner_iso-tester PASS 40.15 seconds TestRunner_bnep-tester PASS 10.16 seconds TestRunner_mgmt-tester PASS 212.81 seconds TestRunner_rfcomm-tester PASS 15.33 seconds TestRunner_sco-tester PASS 16.32 seconds TestRunner_ioctl-tester PASS 17.12 seconds TestRunner_mesh-tester PASS 12.64 seconds TestRunner_smp-tester PASS 13.61 seconds TestRunner_userchan-tester PASS 10.59 seconds IncrementalBuild PASS 34.79 seconds --- Regards, Linux Bluetooth
On Fri, Jul 07, 2023 at 02:29:58PM +0800, Chris Lu wrote: > Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip. > I've been testing a similar patch here for 0489/e0f1, which is the vid/pid I see on m my Dell Inspiron laptop. Dev info is: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f1 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us I've only tested with keyboard/mice HID devices so far, is that good enough? Also, do you want me to send a patch or is this enough info ?
On Fri, 2023-07-07 at 13:04 +0100, Roger Gammans wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > On Fri, Jul 07, 2023 at 02:29:58PM +0800, Chris Lu wrote: > > Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip. > > > > I've been testing a similar patch here for 0489/e0f1, which is the > vid/pid I see on m my Dell Inspiron laptop. > > > Dev info is: > T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e0f1 Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us > > I've only tested with keyboard/mice HID devices so far, is that > good enough? > > Also, do you want me to send a patch or is this enough info ? > > -- > Roger Gammans Hi Roger, Thanks for your reported and information, However, due to our company's policy and limitation, I only maintain Bluetooth driver to support specific project using upstream driver and which belongs to Mediatek's customer currently. Vid/Pid 0489/e0f1 is a MT7922 module for Windows PC. We'll recommend that you can send a patch to support MT7922 Bluetooth module with 0489/e0f1 by yourself if you needed. Otherwise, you have to wait until there is a linux project adopted with the same module in the future. I'll also let my manager aware of such support problem that user changing OS from windows to Linux. Sorry for the inconvenience. BRs, Chris >
Hello: This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>: On Fri, 7 Jul 2023 14:29:58 +0800 you wrote: > Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip. > > The information in /sys/kernel/debug/usb/devices about the Bluetooth > device is listed as the below. > > T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e102 Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us > > [...] Here is the summary with links: - [v3,1/2] Bluetooth: btusb: Add new VID/PID 0489/e102 for MT7922 https://git.kernel.org/bluetooth/bluetooth-next/c/159c43e9925e - [v3,2/2] Bluetooth: btusb: Add new VID/PID 04ca/3804 for MT7922 https://git.kernel.org/bluetooth/bluetooth-next/c/b18d35adebf4 You are awesome, thank you!
On 2023/7/7 14:29, Chris Lu wrote: > Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip. > > The information in /sys/kernel/debug/usb/devices about the Bluetooth > device is listed as the below. > > T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e102 Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us > I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us > E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us > > Signed-off-by: Chris Lu <chris.lu@mediatek.com> > --- > v2: update commit message > v3: fix bot checking error, change title Hi Chris, mind to add this patch to v6.4.x stable? Or end users need to wait for v6.6 to get bluetooth support on laptops like ASUS G14. Thanks, Qu > --- > drivers/bluetooth/btusb.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index c7411557e491..9c886c9cce64 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -635,6 +635,9 @@ static const struct usb_device_id blacklist_table[] = { > { USB_DEVICE(0x0489, 0xe0f6), .driver_info = BTUSB_MEDIATEK | > BTUSB_WIDEBAND_SPEECH | > BTUSB_VALID_LE_STATES }, > + { USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK | > + BTUSB_WIDEBAND_SPEECH | > + BTUSB_VALID_LE_STATES }, > > /* Additional Realtek 8723AE Bluetooth devices */ > { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c7411557e491..9c886c9cce64 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -635,6 +635,9 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe0f6), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, + { USB_DEVICE(0x0489, 0xe102), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, /* Additional Realtek 8723AE Bluetooth devices */ { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
Add VID 0489 & PID e102 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e102 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> --- v2: update commit message v3: fix bot checking error, change title --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+)