@@ -357,14 +357,16 @@ CLEANFILES += $(builtin_files) src/bluetooth.service
if MANPAGES
man_MANS += src/bluetoothd.8
-man_MANS += doc/org.bluez.Adapter.5 doc/org.bluez.DeviceSet.5
+man_MANS += doc/org.bluez.Adapter.5 doc/org.bluez.Device.5 \
+ doc/org.bluez.DeviceSet.5
man_MANS += doc/org.bluez.Media.5 doc/org.bluez.MediaControl.5 \
doc/org.bluez.MediaPlayer.5 doc/org.bluez.MediaFolder.5 \
doc/org.bluez.MediaItem.5 doc/org.bluez.MediaEndpoint.5 \
doc/org.bluez.MediaTransport.5
endif
manual_pages += src/bluetoothd.8
-manual_pages += doc/org.bluez.Adapter.5 doc/org.bluez.DeviceSet.5
+manual_pages += doc/org.bluez.Adapter.5 doc/org.bluez.Device.5 \
+ doc/org.bluez.DeviceSet.5
manual_pages += doc/org.bluez.Media.5 doc/org.bluez.MediaControl.5 \
doc/org.bluez.MediaPlayer.5 doc/org.bluez.MediaFolder.5 \
doc/org.bluez.MediaItem.5 doc/org.bluez.MediaEndpoint.5 \
@@ -405,12 +407,12 @@ EXTRA_DIST += doc/assigned-numbers.txt doc/supported-features.txt \
doc/settings-storage.txt
EXTRA_DIST += doc/mgmt-api.txt \
- doc/device-api.txt \
doc/agent-api.txt doc/profile-api.txt \
doc/network-api.txt doc/health-api.txt \
doc/sap-api.txt doc/input-api.txt
-EXTRA_DIST += doc/org.bluez.Adapter.rst doc/org.bluez.DeviceSet.rst
+EXTRA_DIST += doc/org.bluez.Adapter.rst doc/org.bluez.Device.rst \
+ doc/org.bluez.DeviceSet.rst
EXTRA_DIST += doc/org.bluez.Media.rst doc/org.bluez.MediaControl.rst \
doc/org.bluez.MediaPlayer.rst doc/org.bluez.MediaFolder.rst \
deleted file mode 100644
@@ -1,293 +0,0 @@
-BlueZ D-Bus Device API description
-**********************************
-
-
-Device hierarchy
-================
-
-Service org.bluez
-Interface org.bluez.Device1
-Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
-
-Methods void Connect()
-
- This is a generic method to connect any profiles
- the remote device supports that can be connected
- to and have been flagged as auto-connectable on
- our side. If only subset of profiles is already
- connected it will try to connect currently disconnected
- ones.
-
- If at least one profile was connected successfully this
- method will indicate success.
-
- For dual-mode devices only one bearer is connected at
- time, the conditions are in the following order:
-
- 1. Connect the disconnected bearer if already
- connected.
-
- 2. Connect first the bonded bearer. If no
- bearers are bonded or both are skip and check
- latest seen bearer.
-
- 3. Connect last seen bearer, in case the
- timestamps are the same BR/EDR takes
- precedence.
-
- Possible errors: org.bluez.Error.NotReady
- org.bluez.Error.Failed
- org.bluez.Error.InProgress
- org.bluez.Error.AlreadyConnected
-
- void Disconnect()
-
- This method gracefully disconnects all connected
- profiles and then terminates low-level ACL connection.
-
- ACL connection will be terminated even if some profiles
- were not disconnected properly e.g. due to misbehaving
- device.
-
- This method can be also used to cancel a preceding
- Connect call before a reply to it has been received.
-
- For non-trusted devices connected over LE bearer calling
- this method will disable incoming connections until
- Connect method is called again.
-
- Possible errors: org.bluez.Error.NotConnected
-
- void ConnectProfile(string uuid)
-
- This method connects a specific profile of this
- device. The UUID provided is the remote service
- UUID for the profile.
-
- Possible errors: org.bluez.Error.Failed
- org.bluez.Error.InProgress
- org.bluez.Error.InvalidArguments
- org.bluez.Error.NotAvailable
- org.bluez.Error.NotReady
-
- void DisconnectProfile(string uuid)
-
- This method disconnects a specific profile of
- this device. The profile needs to be registered
- client profile.
-
- There is no connection tracking for a profile, so
- as long as the profile is registered this will always
- succeed.
-
- Possible errors: org.bluez.Error.Failed
- org.bluez.Error.InProgress
- org.bluez.Error.InvalidArguments
- org.bluez.Error.NotSupported
-
- void Pair()
-
- This method will connect to the remote device,
- initiate pairing and then retrieve all SDP records
- (or GATT primary services).
-
- If the application has registered its own agent,
- then that specific agent will be used. Otherwise
- it will use the default agent.
-
- Only for applications like a pairing wizard it
- would make sense to have its own agent. In almost
- all other cases the default agent will handle
- this just fine.
-
- In case there is no application agent and also
- no default agent present, this method will fail.
-
- Possible errors: org.bluez.Error.InvalidArguments
- org.bluez.Error.Failed
- org.bluez.Error.AlreadyExists
- org.bluez.Error.AuthenticationCanceled
- org.bluez.Error.AuthenticationFailed
- org.bluez.Error.AuthenticationRejected
- org.bluez.Error.AuthenticationTimeout
- org.bluez.Error.ConnectionAttemptFailed
-
- void CancelPairing()
-
- This method can be used to cancel a pairing
- operation initiated by the Pair method.
-
- Possible errors: org.bluez.Error.DoesNotExist
- org.bluez.Error.Failed
-
-Properties string Address [readonly]
-
- The Bluetooth device address of the remote device.
-
- string AddressType [readonly]
-
- The Bluetooth device Address Type. For dual-mode and
- BR/EDR only devices this defaults to "public". Single
- mode LE devices may have either value. If remote device
- uses privacy than before pairing this represents address
- type used for connection and Identity Address after
- pairing.
-
- Possible values:
- "public" - Public address
- "random" - Random address
-
- string Name [readonly, optional]
-
- The Bluetooth remote name. This value can not be
- changed. Use the Alias property instead.
-
- This value is only present for completeness. It is
- better to always use the Alias property when
- displaying the devices name.
-
- If the Alias property is unset, it will reflect
- this value which makes it more convenient.
-
- string Icon [readonly, optional]
-
- Proposed icon name according to the freedesktop.org
- icon naming specification.
-
- uint32 Class [readonly, optional]
-
- The Bluetooth class of device of the remote device.
-
- uint16 Appearance [readonly, optional]
-
- External appearance of device, as found on GAP service.
-
- array{string} UUIDs [readonly, optional]
-
- List of 128-bit UUIDs that represents the available
- remote services.
-
- boolean Paired [readonly]
-
- Indicates if the remote device is paired. Paired means
- the pairing process where devices exchange the
- information to establish an encrypted connection has
- been completed.
-
- boolean Bonded [readonly]
-
- Indicates if the remote device is bonded. Bonded means
- the information exchanged on pairing process has been
- stored and will be persisted.
-
- boolean Connected [readonly]
-
- Indicates if the remote device is currently connected.
- A PropertiesChanged signal indicate changes to this
- status.
-
- boolean Trusted [readwrite]
-
- Indicates if the remote is seen as trusted. This
- setting can be changed by the application.
-
- boolean Blocked [readwrite]
-
- If set to true any incoming connections from the
- device will be immediately rejected. Any device
- drivers will also be removed and no new ones will
- be probed as long as the device is blocked.
-
- boolean WakeAllowed [readwrite]
-
- If set to true this device will be allowed to wake the
- host from system suspend.
-
- string Alias [readwrite]
-
- The name alias for the remote device. The alias can
- be used to have a different friendly name for the
- remote device.
-
- In case no alias is set, it will return the remote
- device name. Setting an empty string as alias will
- convert it back to the remote device name.
-
- When resetting the alias with an empty string, the
- property will default back to the remote name.
-
- object Adapter [readonly]
-
- The object path of the adapter the device belongs to.
-
- boolean LegacyPairing [readonly]
-
- Set to true if the device only supports the pre-2.1
- pairing mechanism. This property is useful during
- device discovery to anticipate whether legacy or
- simple pairing will occur if pairing is initiated.
-
- Note that this property can exhibit false-positives
- in the case of Bluetooth 2.1 (or newer) devices that
- have disabled Extended Inquiry Response support.
-
- string Modalias [readonly, optional]
-
- Remote Device ID information in modalias format
- used by the kernel and udev.
-
- int16 RSSI [readonly, optional]
-
- Received Signal Strength Indicator of the remote
- device (inquiry or advertising).
-
- int16 TxPower [readonly, optional]
-
- Advertised transmitted power level (inquiry or
- advertising).
-
- dict ManufacturerData [readonly, optional]
-
- Manufacturer specific advertisement data. Keys are
- 16 bits Manufacturer ID followed by its byte array
- value.
-
- dict ServiceData [readonly, optional]
-
- Service advertisement data. Keys are the UUIDs in
- string format followed by its byte array value.
-
- bool ServicesResolved [readonly]
-
- Indicate whether or not service discovery has been
- resolved.
-
- array{byte} AdvertisingFlags [readonly, experimental]
-
- The Advertising Data Flags of the remote device.
-
- dict AdvertisingData [readonly, experimental]
-
- The Advertising Data of the remote device. Keys are
- are 8 bits AD Type followed by data as byte array.
-
- Note: Only types considered safe to be handled by
- application are exposed.
-
- Possible values:
- <type> <byte array>
- ...
-
- Example:
- <Transport Discovery> <Organization Flags...>
- 0x26 0x01 0x01...
-
- array{object, dict} Sets [readonly, experimental]
-
- The object paths of the sets the device belongs to
- followed by a dictionary which can contain the
- following:
-
- byte Rank:
-
- Rank of the device in the Set.
new file mode 100644
@@ -0,0 +1,329 @@
+================
+org.bluez.Device
+================
+
+------------------------------------
+BlueZ D-Bus Device API documentation
+------------------------------------
+
+:Version: BlueZ
+:Date: October 2023
+:Manual section: 5
+:Manual group: Linux System Administration
+
+Interface
+=========
+
+:Service: org.bluez
+:Interface: org.bluez.Device1
+:Object path: [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
+
+Methods
+-------
+
+void Connect()
+``````````````
+
+ Connects all profiles the remote device supports that can be connected
+ to and have been flagged as auto-connectable. If only subset of profiles
+ is already connected it will try to connect currently disconnected ones.
+
+ If at least one profile was connected successfully this method will
+ indicate success.
+
+ For dual-mode devices only one bearer is connected at time, the
+ conditions are in the following order:
+
+ 1. Connect the disconnected bearer if already connected.
+
+ 2. Connect first the bonded bearer. If no bearers are bonded or both
+ are skip and check latest seen bearer.
+
+ 3. Connect last seen bearer, in case the timestamps are the same BR/EDR
+ takes precedence.
+
+ Possible errors:
+
+ :org.bluez.Error.NotReady:
+ :org.bluez.Error.Failed:
+ :org.bluez.Error.InProgress:
+ :org.bluez.Error.AlreadyConnected:
+
+void Disconnect()
+`````````````````
+
+ Disconnects all connected profiles and then terminates low-level ACL
+ connection.
+
+ ACL connection will be terminated even if some profiles were not
+ disconnected properly e.g. due to misbehaving device.
+
+ This method can be also used to cancel a preceding Connect call before
+ a reply to it has been received.
+
+ For non-trusted devices connected over LE bearer calling this method
+ will disable incoming connections until Connect method is called again.
+
+ Possible errors:
+
+ :org.bluez.Error.NotConnected:
+
+void ConnectProfile(string uuid)
+````````````````````````````````
+
+ Connects a specific profile of this device. The UUID provided is the
+ remote service UUID for the profile.
+
+ Possible errors:
+
+ :org.bluez.Error.Failed:
+ :org.bluez.Error.InProgress:
+ :org.bluez.Error.InvalidArguments:
+ :org.bluez.Error.NotAvailable:
+ :org.bluez.Error.NotReady:
+
+void DisconnectProfile(string uuid)
+```````````````````````````````````
+
+ Disconnects a specific profile of this device. The profile needs to be
+ registered client profile.
+
+ There is no connection tracking for a profile, so as long as the
+ profile is registered this will always succeed.
+
+ Possible errors:
+
+ :org.bluez.Error.Failed:
+ :org.bluez.Error.InProgress:
+ :org.bluez.Error.InvalidArguments:
+ :org.bluez.Error.NotSupported:
+
+void Pair()
+```````````
+
+ Connects to the remote device and initiate pairing procedure then
+ proceed with service discovery.
+
+ If the application has registered its own agent, then that specific
+ agent will be used. Otherwise it will use the default agent.
+
+ Only for applications like a pairing wizard it would make sense to have
+ its own agent. In almost all other cases the default agent will handle
+ this just fine.
+
+ In case there is no application agent and also no default agent present,
+ this method will fail.
+
+ Possible errors:
+
+ :org.bluez.Error.InvalidArguments:
+ :org.bluez.Error.Failed:
+ :org.bluez.Error.AlreadyExists:
+ :org.bluez.Error.AuthenticationCanceled:
+ :org.bluez.Error.AuthenticationFailed:
+ :org.bluez.Error.AuthenticationRejected:
+ :org.bluez.Error.AuthenticationTimeout:
+ :org.bluez.Error.ConnectionAttemptFailed:
+
+void CancelPairing()
+````````````````````
+
+ Cancels a pairing operation initiated by the **Pair** method.
+
+ Possible errors:
+
+ :org.bluez.Error.DoesNotExist:
+ :org.bluez.Error.Failed:
+
+Properties
+----------
+
+string Address [readonly]
+`````````````````````````
+
+ The Bluetooth device address of the remote device.
+
+string AddressType [readonly]
+`````````````````````````````
+
+ The Bluetooth device Address Type. For dual-mode and BR/EDR only devices
+ this defaults to "public". Single mode LE devices may have either value.
+ If remote device uses privacy than before pairing this represents
+ address type used for connection and Identity Address after pairing.
+
+ Possible values:
+
+ :"public":
+
+ Public address
+
+ :"random":
+
+ Random address
+
+string Name [readonly, optional]
+````````````````````````````````
+
+ The Bluetooth remote name.
+
+ This value is only present for completeness. It is better to always use
+ the **Alias** property when displaying the devices name.
+
+ If the **Alias** property is unset, it will reflect this value which
+ makes it more convenient.
+
+string Icon [readonly, optional]
+````````````````````````````````
+
+ Proposed icon name according to the freedesktop.org icon naming
+ specification.
+
+uint32 Class [readonly, optional]
+`````````````````````````````````
+
+ The Bluetooth class of device of the remote device.
+
+uint16 Appearance [readonly, optional]
+``````````````````````````````````````
+
+ External appearance of device, as found on GAP service.
+
+array{string} UUIDs [readonly, optional]
+````````````````````````````````````````
+
+ List of 128-bit UUIDs that represents the available remote services.
+
+boolean Paired [readonly]
+`````````````````````````
+
+ Indicates if the remote device is paired. Paired means the pairing
+ process where devices exchange the information to establish an
+ encrypted connection has been completed.
+
+boolean Bonded [readonly]
+`````````````````````````
+
+ Indicates if the remote device is bonded. Bonded means the information
+ exchanged on pairing process has been stored and will be persisted.
+
+boolean Connected [readonly]
+````````````````````````````
+
+ Indicates if the remote device is currently connected.
+ A PropertiesChanged signal indicate changes to this status.
+
+boolean Trusted [readwrite]
+```````````````````````````
+
+ Indicates if the remote is seen as trusted. This setting can be changed
+ by the application.
+
+boolean Blocked [readwrite]
+```````````````````````````
+
+ If set to true any incoming connections from the device will be
+ immediately rejected. Any device drivers will also be removed and
+ no new ones will be probed as long as the device is blocked.
+
+boolean WakeAllowed [readwrite]
+```````````````````````````````
+
+ If set to true this device will be allowed to wake the host from
+ system suspend.
+
+string Alias [readwrite]
+````````````````````````
+
+ The name alias for the remote device. The alias can be used to have a
+ different friendly name for the remote device.
+
+ In case no alias is set, it will return the remote device name. Setting
+ an empty string as alias will convert it back to the remote device name.
+
+ When resetting the alias with an empty string, the property will default
+ back to the remote name.
+
+object Adapter [readonly]
+`````````````````````````
+
+ The object path of the adapter the device belongs to.
+
+boolean LegacyPairing [readonly]
+````````````````````````````````
+
+ Set to true if the device only supports the pre-2.1 pairing mechanism.
+ This property is useful during device discovery to anticipate whether
+ legacy or simple pairing will occur if pairing is initiated.
+
+ Note that this property can exhibit false-positives in the case of
+ Bluetooth 2.1 (or newer) devices that have disabled Extended Inquiry
+ Response support.
+
+string Modalias [readonly, optional]
+````````````````````````````````````
+
+ Remote Device ID information in modalias format used by the kernel and
+ udev.
+
+int16 RSSI [readonly, optional]
+```````````````````````````````
+
+ Received Signal Strength Indicator of the remote device (inquiry or
+ advertising).
+
+int16 TxPower [readonly, optional]
+``````````````````````````````````
+
+ Advertised transmitted power level (inquiry or advertising).
+
+dict ManufacturerData [readonly, optional]
+``````````````````````````````````````````
+
+ Manufacturer specific advertisement data. Keys are 16 bits Manufacturer
+ ID followed by its byte array value.
+
+dict ServiceData [readonly, optional]
+`````````````````````````````````````
+
+ Service advertisement data. Keys are the UUIDs in string format followed
+ by its byte array value.
+
+bool ServicesResolved [readonly]
+````````````````````````````````
+
+ Indicate whether or not service discovery has been resolved.
+
+array{byte} AdvertisingFlags [readonly, experimental]
+`````````````````````````````````````````````````````
+
+ The Advertising Data Flags of the remote device.
+
+dict AdvertisingData [readonly, experimental]
+`````````````````````````````````````````````
+
+ The Advertising Data of the remote device. Keys are 1 byte AD Type
+ followed by data as byte array.
+
+ Note: Only types considered safe to be handled by application are
+ exposed.
+
+ Possible values:
+
+ :<type>:
+
+ <byte array>
+
+ Example:
+
+ <Transport Discovery> <Organization Flags...>
+ 0x26 0x01 0x01...
+
+array{object, dict} Sets [readonly, experimental]
+`````````````````````````````````````````````````
+
+ The object paths of the sets the device belongs to followed by a
+ dictionary which can contain the following:
+
+ :byte Rank:
+
+ Rank of the device in the Set.
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> This renames device-api.txt to org.bluez.Device.rst and generate a manpage org.bluez.Device.5. --- Makefile.am | 10 +- doc/device-api.txt | 293 ---------------------------------- doc/org.bluez.Device.rst | 329 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 335 insertions(+), 297 deletions(-) delete mode 100644 doc/device-api.txt create mode 100644 doc/org.bluez.Device.rst