| Message ID | 20240507155658.294676-3-kiran.k@intel.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,1/3] Bluetooth: btintel: Export few static functions | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | success | Success |
| tedd_an/CheckPatch | success | CheckPatch PASS |
| tedd_an/GitLint | success | Gitlint PASS |
| tedd_an/SubjectPrefix | success | Gitlint PASS |
| tedd_an/IncrementalBuild | success | Incremental Build PASS |
Hi Kiran, On Tue, May 7, 2024 at 12:23 PM Kiran K <kiran.k@intel.com> wrote: > > Add support to download firmware. > > dmesg: > [4.407464] Bluetooth: Core ver 2.22 > [4.407467] Bluetooth: Starting self testing > [4.409093] Bluetooth: ECDH test passed in 1587 usecs > [4.420737] Bluetooth: SMP test passed in 526 usecs > [4.420745] Bluetooth: Finished self testing > [4.420760] Bluetooth: HCI device and connection manager initialized > [4.420764] Bluetooth: HCI socket layer initialized > [4.420766] Bluetooth: L2CAP socket layer initialized > [4.420769] Bluetooth: SCO socket layer initialized > [4.437976] Bluetooth: hci0: Device revision is 0 > [4.437979] Bluetooth: hci0: Secure boot is disabled > [4.437980] Bluetooth: hci0: OTP lock is disabled > [4.437980] Bluetooth: hci0: API lock is disabled > [4.437981] Bluetooth: hci0: Debug lock is disabled > [4.437981] Bluetooth: hci0: Minimum firmware build 0 week 0 2000 > [4.437982] Bluetooth: hci0: Bootloader timestamp 2023.33 buildtype 1 build 45995 > [4.439461] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-iml.sfi > [4.439467] Bluetooth: hci0: Boot Address: 0x30099000 > [4.439468] Bluetooth: hci0: Firmware Version: 92-19.24 > [4.486773] Bluetooth: hci0: Waiting for firmware download to complete > [4.486784] Bluetooth: hci0: Firmware loaded in 46209 usecs > [4.486845] Bluetooth: hci0: Waiting for device to boot > [4.491984] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 We might want to fix the above as it is reporting as Malformed. > [4.491987] Bluetooth: hci0: Device booted in 5074 usecs > [4.496657] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291.sfi > [4.496703] Bluetooth: hci0: Boot Address: 0x10000800 > [4.496704] Bluetooth: hci0: Firmware Version: 92-19.24 > [4.687338] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [4.687342] Bluetooth: BNEP filters: protocol multicast > [4.687345] Bluetooth: BNEP socket layer initialized > [4.922589] Bluetooth: hci0: Waiting for firmware download to complete > [4.922608] Bluetooth: hci0: Firmware loaded in 415962 usecs > [4.922664] Bluetooth: hci0: Waiting for device to boot > [4.956185] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 > [4.956188] Bluetooth: hci0: Device booted in 32770 usecs > [4.963167] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc > [4.963440] Bluetooth: hci0: Applying Intel DDC parameters completed > [4.963684] Bluetooth: hci0: Firmware timestamp 2024.18 buildtype 3 build 62300 > [4.963687] Bluetooth: hci0: Firmware SHA1: 0x8201a4cd > [5.003020] Bluetooth: MGMT ver 1.22 > [5.003084] Bluetooth: ISO socket layer initialized > [5.057844] Bluetooth: RFCOMM TTY layer initialized > [5.057858] Bluetooth: RFCOMM socket layer initialized > [5.057865] Bluetooth: RFCOMM ver 1.11 > > hciconfig -a: > hci0: Type: Primary Bus: PCI > BD Address: A0:D3:65:48:F5:7F ACL MTU: 1021:5 SCO MTU: 240:8 > UP RUNNING PSCAN > RX bytes:23603 acl:0 sco:0 events:3792 errors:0 > TX bytes:949804 acl:0 sco:0 commands:3788 errors:0 > Features: 0xbf 0xfe 0x0f 0xfe 0xdb 0xff 0x7b 0x87 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH SNIFF > Link mode: PERIPHERAL ACCEPT > Name: 'LNLM620' > Class: 0x20010c > Service Classes: Audio > Device Class: Computer, Laptop > HCI Version: 5.4 (0xd) Revision: 0x4b5c > LMP Version: 5.4 (0xd) Subversion: 0x4b5c > Manufacturer: Intel Corp. (2) > > Signed-off-by: Chandrashekar <chandrashekar.devegowda@intel.com> > Suggested-by: Bjorn Helgaas <helgaas@kernel.org> > Signed-off-by: Kiran K <kiran.k@intel.com> > --- > drivers/bluetooth/btintel_pcie.c | 313 ++++++++++++++++++++++++++++++- > drivers/bluetooth/btintel_pcie.h | 5 + > 2 files changed, 315 insertions(+), 3 deletions(-) > > diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c > index 911bb50d7ce7..664cc08b0b4f 100644 > --- a/drivers/bluetooth/btintel_pcie.c > +++ b/drivers/bluetooth/btintel_pcie.c > @@ -42,6 +42,7 @@ MODULE_DEVICE_TABLE(pci, btintel_pcie_table); > > /* Intel PCIe uses 4 bytes of HCI type instead of 1 byte BT SIG HCI type */ > #define BTINTEL_PCIE_HCI_TYPE_LEN 4 > +#define BTINTEL_PCIE_HCI_CMD_PKT 0x00000001 > #define BTINTEL_PCIE_HCI_ACL_PKT 0x00000002 > #define BTINTEL_PCIE_HCI_SCO_PKT 0x00000003 > #define BTINTEL_PCIE_HCI_EVT_PKT 0x00000004 > @@ -88,6 +89,75 @@ static struct btintel_pcie_data *btintel_pcie_get_data(struct msix_entry *entry) > return container_of(entries, struct btintel_pcie_data, msix_entries[0]); > } > > +/* Set the doorbell for TXQ to notify the device that @index (actually index-1) > + * of the TFD is updated and ready to transmit. > + */ > +static void btintel_pcie_set_tx_db(struct btintel_pcie_data *data, u16 index) > +{ > + u32 val; > + > + val = index; > + val |= (BTINTEL_PCIE_TX_DB_VEC << 16); > + > + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_HBUS_TARG_WRPTR, val); > +} > + > +/* Copy the data to next(@tfd_index) data buffer and update the TFD(transfer > + * descriptor) with the data length and the DMA address of the data buffer. > + */ > +static void btintel_pcie_prepare_tx(struct txq *txq, u16 tfd_index, > + struct sk_buff *skb) > +{ > + struct data_buf *buf; > + struct tfd *tfd; > + > + tfd = &txq->tfds[tfd_index]; > + memset(tfd, 0, sizeof(*tfd)); > + > + buf = &txq->bufs[tfd_index]; > + > + tfd->size = skb->len; > + tfd->addr = buf->data_p_addr; > + > + /* Copy the outgoing data to DMA buffer */ > + memcpy(buf->data, skb->data, tfd->size); > +} > + > +static int btintel_pcie_send_sync(struct btintel_pcie_data *data, > + struct sk_buff *skb) > +{ > + int ret; > + u16 tfd_index; > + struct txq *txq = &data->txq; > + > + tfd_index = data->ia.tr_hia[BTINTEL_PCIE_TXQ_NUM]; > + > + if (tfd_index > txq->count) > + return -ERANGE; > + > + /* Prepare for TX. It updates the TFD with the length of data and > + * address of the DMA buffer, and copy the data to the DMA buffer > + */ > + btintel_pcie_prepare_tx(txq, tfd_index, skb); > + > + tfd_index = (tfd_index + 1) % txq->count; > + data->ia.tr_hia[BTINTEL_PCIE_TXQ_NUM] = tfd_index; > + > + /* Arm wait event condition */ > + data->tx_wait_done = false; > + > + /* Set the doorbell to notify the device */ > + btintel_pcie_set_tx_db(data, tfd_index); > + > + /* Wait for the complete interrupt - URBD0 */ > + ret = wait_event_timeout(data->tx_wait_q, data->tx_wait_done, > + msecs_to_jiffies(TX_WAIT_TIMEOUT_MS)); > + if (!ret) > + return -ETIME; > + > + return 0; > +} > + > /* Set the doorbell for RXQ to notify the device that @index (actually index-1) > * is available to receive the data > */ > @@ -933,15 +1003,252 @@ static int btintel_pcie_alloc(struct btintel_pcie_data *data) > return err; > } > > +static int btintel_pcie_hci_open(struct hci_dev *hdev) > +{ > + bt_dev_dbg(hdev, "btintel_pcie_hci_open"); Afaik you don't need to add the function name as that can be enabled directly with debugfs. > + return 0; > +} > + > +static int btintel_pcie_hci_close(struct hci_dev *hdev) > +{ > + bt_dev_dbg(hdev, "btintel_pcie_hci_close"); Ditto. > + return 0; > +} > + > +static int btintel_pcie_inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) > +{ > + struct sk_buff *skb; > + struct hci_event_hdr *hdr; > + struct hci_ev_cmd_complete *evt; > + > + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL); > + if (!skb) > + return -ENOMEM; > + > + hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr)); > + hdr->evt = HCI_EV_CMD_COMPLETE; > + hdr->plen = sizeof(*evt) + 1; > + > + evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt)); > + evt->ncmd = 0x01; > + evt->opcode = cpu_to_le16(opcode); > + > + *(u8 *)skb_put(skb, 1) = 0x00; > + > + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; > + > + return hci_recv_frame(hdev, skb); > +} > + > +static int btintel_pcie_hci_send_frame(struct hci_dev *hdev, > + struct sk_buff *skb) > +{ > + struct btintel_pcie_data *data = hci_get_drvdata(hdev); > + int ret; > + u32 type; > + > + /* Due to the fw limitation, the type header of the packet should be > + * 4 bytes unlike 1 byte for UART. In UART, the firmware can read > + * the first byte to get the packet type and redirect the rest of data > + * packet to the right handler. > + * > + * But for PCIe, THF(Transfer Flow Handler) fetches the 4 bytes of data > + * from DMA memory and by the time it reads the first 4 bytes, it has > + * already consumed some part of packet. Thus the packet type indicator > + * for iBT PCIe is 4 bytes. > + * > + * Luckily, when HCI core creates the skb, it allocates 8 bytes of > + * head room for profile and driver use, and before sending the data > + * to the device, append the iBT PCIe packet type in the front. > + */ > + switch (hci_skb_pkt_type(skb)) { > + case HCI_COMMAND_PKT: > + type = BTINTEL_PCIE_HCI_CMD_PKT; > + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { > + struct hci_command_hdr *cmd = (void *)skb->data; > + __u16 opcode = le16_to_cpu(cmd->opcode); > + > + /* When the 0xfc01 command is issued to boot into > + * the operational firmware, it will actually not > + * send a command complete event. To keep the flow > + * control working inject that event here. > + */ > + if (opcode == 0xfc01) > + btintel_pcie_inject_cmd_complete(hdev, opcode); > + } > + hdev->stat.cmd_tx++; > + break; > + case HCI_ACLDATA_PKT: > + type = BTINTEL_PCIE_HCI_ACL_PKT; > + hdev->stat.acl_tx++; > + break; > + case HCI_SCODATA_PKT: > + type = BTINTEL_PCIE_HCI_SCO_PKT; > + hdev->stat.sco_tx++; > + break; > + default: > + bt_dev_err(hdev, "Unknown HCI packet type"); > + return -EILSEQ; > + } > + memcpy(skb_push(skb, BTINTEL_PCIE_HCI_TYPE_LEN), &type, > + BTINTEL_PCIE_HCI_TYPE_LEN); > + > + ret = btintel_pcie_send_sync(data, skb); > + if (ret) { > + hdev->stat.err_tx++; > + bt_dev_err(hdev, "Failed to send frame (%d)", ret); > + goto exit_error; You don't really need the goto line above since it will jump to that line anyway. > + } else { > + hdev->stat.byte_tx += skb->len; > + kfree_skb(skb); > + } > + > +exit_error: > + return ret; > +} > + > static void btintel_pcie_release_hdev(struct btintel_pcie_data *data) > { > - /* TODO: Unregister and release hdev */ > + struct hci_dev *hdev; > + > + hdev = data->hdev; > + hci_unregister_dev(hdev); > + hci_free_dev(hdev); > + data->hdev = NULL; > +} > + > +static int btintel_pcie_setup(struct hci_dev *hdev) > +{ > + const u8 param[1] = { 0xFF }; > + struct intel_version_tlv ver_tlv; > + struct sk_buff *skb; > + int err; > + > + BT_DBG("%s", hdev->name); > + > + skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); > + if (IS_ERR(skb)) { > + bt_dev_err(hdev, "Reading Intel version command failed (%ld)", > + PTR_ERR(skb)); > + return PTR_ERR(skb); > + } > + > + /* Check the status */ > + if (skb->data[0]) { > + bt_dev_err(hdev, "Intel Read Version command failed (%02x)", > + skb->data[0]); > + err = -EIO; > + goto exit_error; > + } > + > + /* Apply the common HCI quirks for Intel device */ > + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); > + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); > + set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); > + > + /* Set up the quality report callback for Intel devices */ > + hdev->set_quality_report = btintel_set_quality_report; > + > + memset(&ver_tlv, 0, sizeof(ver_tlv)); > + /* For TLV type device, parse the tlv data */ > + err = btintel_parse_version_tlv(hdev, &ver_tlv, skb); > + if (err) { > + bt_dev_err(hdev, "Failed to parse TLV version information"); > + goto exit_error; > + } > + > + switch (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)) { > + case 0x37: > + break; > + default: > + bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)", > + INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)); > + err = -EINVAL; > + goto exit_error; > + } > + > + /* Check for supported iBT hardware variants of this firmware > + * loading method. > + * > + * This check has been put in place to ensure correct forward > + * compatibility options when newer hardware variants come > + * along. > + */ > + switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) { > + case 0x1e: /* BzrI */ > + /* Display version information of TLV type */ > + btintel_version_info_tlv(hdev, &ver_tlv); > + > + /* Apply the device specific HCI quirks for TLV based devices > + * > + * All TLV based devices support WBS > + */ > + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); > + > + /* Apply LE States quirk from solar onwards */ > + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); > + > + /* Setup MSFT Extension support */ > + btintel_set_msft_opcode(hdev, > + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); > + > + err = btintel_bootloader_setup_tlv(hdev, &ver_tlv); > + if (err) > + goto exit_error; > + break; > + default: > + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", > + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); > + err = -EINVAL; > + break; > + } > + > +exit_error: > + kfree_skb(skb); > + > + return err; > } > > static int btintel_pcie_setup_hdev(struct btintel_pcie_data *data) > { > - /* TODO: initialize hdev and assign the callbacks to hdev */ > - return -ENODEV; > + int err; > + struct hci_dev *hdev; > + > + hdev = hci_alloc_dev(); > + if (!hdev) > + return -ENOMEM; > + > + hdev->bus = HCI_PCI; > + hci_set_drvdata(hdev, data); > + > + hdev->dev_type = HCI_PRIMARY; > + > + data->hdev = hdev; > + SET_HCIDEV_DEV(hdev, &data->pdev->dev); > + > + hdev->manufacturer = 2; > + hdev->open = btintel_pcie_hci_open; > + hdev->close = btintel_pcie_hci_close; > + hdev->send = btintel_pcie_hci_send_frame; > + hdev->setup = btintel_pcie_setup; > + hdev->shutdown = btintel_shutdown_combined; > + hdev->hw_error = btintel_hw_error; > + hdev->set_diag = btintel_set_diag; > + hdev->set_bdaddr = btintel_set_bdaddr; > + > + err = hci_register_dev(hdev); > + if (err < 0) { > + BT_ERR("Failed to register to hdev (%d)", err); > + goto exit_error; > + } > + > + return 0; > + > +exit_error: > + hci_free_dev(hdev); > + return err; > } > > static int btintel_pcie_probe(struct pci_dev *pdev, > diff --git a/drivers/bluetooth/btintel_pcie.h b/drivers/bluetooth/btintel_pcie.h > index f925dfb23cfc..0e596e094f80 100644 > --- a/drivers/bluetooth/btintel_pcie.h > +++ b/drivers/bluetooth/btintel_pcie.h > @@ -87,6 +87,11 @@ enum { > /* DMA allocation alignment */ > #define BTINTEL_PCIE_DMA_POOL_ALIGNMENT 256 > > +#define TX_WAIT_TIMEOUT_MS 500 This value above was this chosen based on what exactly? > + > +/* Doorbell vector for TFD */ > +#define BTINTEL_PCIE_TX_DB_VEC 0 > + > /* Number of pending RX requests for downlink */ > #define BTINTEL_PCIE_RX_MAX_QUEUE 6 > > -- > 2.40.1 > >
diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c index 911bb50d7ce7..664cc08b0b4f 100644 --- a/drivers/bluetooth/btintel_pcie.c +++ b/drivers/bluetooth/btintel_pcie.c @@ -42,6 +42,7 @@ MODULE_DEVICE_TABLE(pci, btintel_pcie_table); /* Intel PCIe uses 4 bytes of HCI type instead of 1 byte BT SIG HCI type */ #define BTINTEL_PCIE_HCI_TYPE_LEN 4 +#define BTINTEL_PCIE_HCI_CMD_PKT 0x00000001 #define BTINTEL_PCIE_HCI_ACL_PKT 0x00000002 #define BTINTEL_PCIE_HCI_SCO_PKT 0x00000003 #define BTINTEL_PCIE_HCI_EVT_PKT 0x00000004 @@ -88,6 +89,75 @@ static struct btintel_pcie_data *btintel_pcie_get_data(struct msix_entry *entry) return container_of(entries, struct btintel_pcie_data, msix_entries[0]); } +/* Set the doorbell for TXQ to notify the device that @index (actually index-1) + * of the TFD is updated and ready to transmit. + */ +static void btintel_pcie_set_tx_db(struct btintel_pcie_data *data, u16 index) +{ + u32 val; + + val = index; + val |= (BTINTEL_PCIE_TX_DB_VEC << 16); + + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_HBUS_TARG_WRPTR, val); +} + +/* Copy the data to next(@tfd_index) data buffer and update the TFD(transfer + * descriptor) with the data length and the DMA address of the data buffer. + */ +static void btintel_pcie_prepare_tx(struct txq *txq, u16 tfd_index, + struct sk_buff *skb) +{ + struct data_buf *buf; + struct tfd *tfd; + + tfd = &txq->tfds[tfd_index]; + memset(tfd, 0, sizeof(*tfd)); + + buf = &txq->bufs[tfd_index]; + + tfd->size = skb->len; + tfd->addr = buf->data_p_addr; + + /* Copy the outgoing data to DMA buffer */ + memcpy(buf->data, skb->data, tfd->size); +} + +static int btintel_pcie_send_sync(struct btintel_pcie_data *data, + struct sk_buff *skb) +{ + int ret; + u16 tfd_index; + struct txq *txq = &data->txq; + + tfd_index = data->ia.tr_hia[BTINTEL_PCIE_TXQ_NUM]; + + if (tfd_index > txq->count) + return -ERANGE; + + /* Prepare for TX. It updates the TFD with the length of data and + * address of the DMA buffer, and copy the data to the DMA buffer + */ + btintel_pcie_prepare_tx(txq, tfd_index, skb); + + tfd_index = (tfd_index + 1) % txq->count; + data->ia.tr_hia[BTINTEL_PCIE_TXQ_NUM] = tfd_index; + + /* Arm wait event condition */ + data->tx_wait_done = false; + + /* Set the doorbell to notify the device */ + btintel_pcie_set_tx_db(data, tfd_index); + + /* Wait for the complete interrupt - URBD0 */ + ret = wait_event_timeout(data->tx_wait_q, data->tx_wait_done, + msecs_to_jiffies(TX_WAIT_TIMEOUT_MS)); + if (!ret) + return -ETIME; + + return 0; +} + /* Set the doorbell for RXQ to notify the device that @index (actually index-1) * is available to receive the data */ @@ -933,15 +1003,252 @@ static int btintel_pcie_alloc(struct btintel_pcie_data *data) return err; } +static int btintel_pcie_hci_open(struct hci_dev *hdev) +{ + bt_dev_dbg(hdev, "btintel_pcie_hci_open"); + + return 0; +} + +static int btintel_pcie_hci_close(struct hci_dev *hdev) +{ + bt_dev_dbg(hdev, "btintel_pcie_hci_close"); + + return 0; +} + +static int btintel_pcie_inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) +{ + struct sk_buff *skb; + struct hci_event_hdr *hdr; + struct hci_ev_cmd_complete *evt; + + skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr)); + hdr->evt = HCI_EV_CMD_COMPLETE; + hdr->plen = sizeof(*evt) + 1; + + evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt)); + evt->ncmd = 0x01; + evt->opcode = cpu_to_le16(opcode); + + *(u8 *)skb_put(skb, 1) = 0x00; + + hci_skb_pkt_type(skb) = HCI_EVENT_PKT; + + return hci_recv_frame(hdev, skb); +} + +static int btintel_pcie_hci_send_frame(struct hci_dev *hdev, + struct sk_buff *skb) +{ + struct btintel_pcie_data *data = hci_get_drvdata(hdev); + int ret; + u32 type; + + /* Due to the fw limitation, the type header of the packet should be + * 4 bytes unlike 1 byte for UART. In UART, the firmware can read + * the first byte to get the packet type and redirect the rest of data + * packet to the right handler. + * + * But for PCIe, THF(Transfer Flow Handler) fetches the 4 bytes of data + * from DMA memory and by the time it reads the first 4 bytes, it has + * already consumed some part of packet. Thus the packet type indicator + * for iBT PCIe is 4 bytes. + * + * Luckily, when HCI core creates the skb, it allocates 8 bytes of + * head room for profile and driver use, and before sending the data + * to the device, append the iBT PCIe packet type in the front. + */ + switch (hci_skb_pkt_type(skb)) { + case HCI_COMMAND_PKT: + type = BTINTEL_PCIE_HCI_CMD_PKT; + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + struct hci_command_hdr *cmd = (void *)skb->data; + __u16 opcode = le16_to_cpu(cmd->opcode); + + /* When the 0xfc01 command is issued to boot into + * the operational firmware, it will actually not + * send a command complete event. To keep the flow + * control working inject that event here. + */ + if (opcode == 0xfc01) + btintel_pcie_inject_cmd_complete(hdev, opcode); + } + hdev->stat.cmd_tx++; + break; + case HCI_ACLDATA_PKT: + type = BTINTEL_PCIE_HCI_ACL_PKT; + hdev->stat.acl_tx++; + break; + case HCI_SCODATA_PKT: + type = BTINTEL_PCIE_HCI_SCO_PKT; + hdev->stat.sco_tx++; + break; + default: + bt_dev_err(hdev, "Unknown HCI packet type"); + return -EILSEQ; + } + memcpy(skb_push(skb, BTINTEL_PCIE_HCI_TYPE_LEN), &type, + BTINTEL_PCIE_HCI_TYPE_LEN); + + ret = btintel_pcie_send_sync(data, skb); + if (ret) { + hdev->stat.err_tx++; + bt_dev_err(hdev, "Failed to send frame (%d)", ret); + goto exit_error; + } else { + hdev->stat.byte_tx += skb->len; + kfree_skb(skb); + } + +exit_error: + return ret; +} + static void btintel_pcie_release_hdev(struct btintel_pcie_data *data) { - /* TODO: Unregister and release hdev */ + struct hci_dev *hdev; + + hdev = data->hdev; + hci_unregister_dev(hdev); + hci_free_dev(hdev); + data->hdev = NULL; +} + +static int btintel_pcie_setup(struct hci_dev *hdev) +{ + const u8 param[1] = { 0xFF }; + struct intel_version_tlv ver_tlv; + struct sk_buff *skb; + int err; + + BT_DBG("%s", hdev->name); + + skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT); + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Reading Intel version command failed (%ld)", + PTR_ERR(skb)); + return PTR_ERR(skb); + } + + /* Check the status */ + if (skb->data[0]) { + bt_dev_err(hdev, "Intel Read Version command failed (%02x)", + skb->data[0]); + err = -EIO; + goto exit_error; + } + + /* Apply the common HCI quirks for Intel device */ + set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); + set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); + + /* Set up the quality report callback for Intel devices */ + hdev->set_quality_report = btintel_set_quality_report; + + memset(&ver_tlv, 0, sizeof(ver_tlv)); + /* For TLV type device, parse the tlv data */ + err = btintel_parse_version_tlv(hdev, &ver_tlv, skb); + if (err) { + bt_dev_err(hdev, "Failed to parse TLV version information"); + goto exit_error; + } + + switch (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)) { + case 0x37: + break; + default: + bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)", + INTEL_HW_PLATFORM(ver_tlv.cnvi_bt)); + err = -EINVAL; + goto exit_error; + } + + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come + * along. + */ + switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) { + case 0x1e: /* BzrI */ + /* Display version information of TLV type */ + btintel_version_info_tlv(hdev, &ver_tlv); + + /* Apply the device specific HCI quirks for TLV based devices + * + * All TLV based devices support WBS + */ + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); + + /* Apply LE States quirk from solar onwards */ + set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); + + /* Setup MSFT Extension support */ + btintel_set_msft_opcode(hdev, + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + + err = btintel_bootloader_setup_tlv(hdev, &ver_tlv); + if (err) + goto exit_error; + break; + default: + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + err = -EINVAL; + break; + } + +exit_error: + kfree_skb(skb); + + return err; } static int btintel_pcie_setup_hdev(struct btintel_pcie_data *data) { - /* TODO: initialize hdev and assign the callbacks to hdev */ - return -ENODEV; + int err; + struct hci_dev *hdev; + + hdev = hci_alloc_dev(); + if (!hdev) + return -ENOMEM; + + hdev->bus = HCI_PCI; + hci_set_drvdata(hdev, data); + + hdev->dev_type = HCI_PRIMARY; + + data->hdev = hdev; + SET_HCIDEV_DEV(hdev, &data->pdev->dev); + + hdev->manufacturer = 2; + hdev->open = btintel_pcie_hci_open; + hdev->close = btintel_pcie_hci_close; + hdev->send = btintel_pcie_hci_send_frame; + hdev->setup = btintel_pcie_setup; + hdev->shutdown = btintel_shutdown_combined; + hdev->hw_error = btintel_hw_error; + hdev->set_diag = btintel_set_diag; + hdev->set_bdaddr = btintel_set_bdaddr; + + err = hci_register_dev(hdev); + if (err < 0) { + BT_ERR("Failed to register to hdev (%d)", err); + goto exit_error; + } + + return 0; + +exit_error: + hci_free_dev(hdev); + return err; } static int btintel_pcie_probe(struct pci_dev *pdev, diff --git a/drivers/bluetooth/btintel_pcie.h b/drivers/bluetooth/btintel_pcie.h index f925dfb23cfc..0e596e094f80 100644 --- a/drivers/bluetooth/btintel_pcie.h +++ b/drivers/bluetooth/btintel_pcie.h @@ -87,6 +87,11 @@ enum { /* DMA allocation alignment */ #define BTINTEL_PCIE_DMA_POOL_ALIGNMENT 256 +#define TX_WAIT_TIMEOUT_MS 500 + +/* Doorbell vector for TFD */ +#define BTINTEL_PCIE_TX_DB_VEC 0 + /* Number of pending RX requests for downlink */ #define BTINTEL_PCIE_RX_MAX_QUEUE 6
Add support to download firmware. dmesg: [4.407464] Bluetooth: Core ver 2.22 [4.407467] Bluetooth: Starting self testing [4.409093] Bluetooth: ECDH test passed in 1587 usecs [4.420737] Bluetooth: SMP test passed in 526 usecs [4.420745] Bluetooth: Finished self testing [4.420760] Bluetooth: HCI device and connection manager initialized [4.420764] Bluetooth: HCI socket layer initialized [4.420766] Bluetooth: L2CAP socket layer initialized [4.420769] Bluetooth: SCO socket layer initialized [4.437976] Bluetooth: hci0: Device revision is 0 [4.437979] Bluetooth: hci0: Secure boot is disabled [4.437980] Bluetooth: hci0: OTP lock is disabled [4.437980] Bluetooth: hci0: API lock is disabled [4.437981] Bluetooth: hci0: Debug lock is disabled [4.437981] Bluetooth: hci0: Minimum firmware build 0 week 0 2000 [4.437982] Bluetooth: hci0: Bootloader timestamp 2023.33 buildtype 1 build 45995 [4.439461] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-iml.sfi [4.439467] Bluetooth: hci0: Boot Address: 0x30099000 [4.439468] Bluetooth: hci0: Firmware Version: 92-19.24 [4.486773] Bluetooth: hci0: Waiting for firmware download to complete [4.486784] Bluetooth: hci0: Firmware loaded in 46209 usecs [4.486845] Bluetooth: hci0: Waiting for device to boot [4.491984] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [4.491987] Bluetooth: hci0: Device booted in 5074 usecs [4.496657] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291.sfi [4.496703] Bluetooth: hci0: Boot Address: 0x10000800 [4.496704] Bluetooth: hci0: Firmware Version: 92-19.24 [4.687338] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [4.687342] Bluetooth: BNEP filters: protocol multicast [4.687345] Bluetooth: BNEP socket layer initialized [4.922589] Bluetooth: hci0: Waiting for firmware download to complete [4.922608] Bluetooth: hci0: Firmware loaded in 415962 usecs [4.922664] Bluetooth: hci0: Waiting for device to boot [4.956185] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [4.956188] Bluetooth: hci0: Device booted in 32770 usecs [4.963167] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc [4.963440] Bluetooth: hci0: Applying Intel DDC parameters completed [4.963684] Bluetooth: hci0: Firmware timestamp 2024.18 buildtype 3 build 62300 [4.963687] Bluetooth: hci0: Firmware SHA1: 0x8201a4cd [5.003020] Bluetooth: MGMT ver 1.22 [5.003084] Bluetooth: ISO socket layer initialized [5.057844] Bluetooth: RFCOMM TTY layer initialized [5.057858] Bluetooth: RFCOMM socket layer initialized [5.057865] Bluetooth: RFCOMM ver 1.11 hciconfig -a: hci0: Type: Primary Bus: PCI BD Address: A0:D3:65:48:F5:7F ACL MTU: 1021:5 SCO MTU: 240:8 UP RUNNING PSCAN RX bytes:23603 acl:0 sco:0 events:3792 errors:0 TX bytes:949804 acl:0 sco:0 commands:3788 errors:0 Features: 0xbf 0xfe 0x0f 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: PERIPHERAL ACCEPT Name: 'LNLM620' Class: 0x20010c Service Classes: Audio Device Class: Computer, Laptop HCI Version: 5.4 (0xd) Revision: 0x4b5c LMP Version: 5.4 (0xd) Subversion: 0x4b5c Manufacturer: Intel Corp. (2) Signed-off-by: Chandrashekar <chandrashekar.devegowda@intel.com> Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Kiran K <kiran.k@intel.com> --- drivers/bluetooth/btintel_pcie.c | 313 ++++++++++++++++++++++++++++++- drivers/bluetooth/btintel_pcie.h | 5 + 2 files changed, 315 insertions(+), 3 deletions(-)