[v4,1/3] dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth

Commit Message

Yang Li via B4 Relay Aug. 9, 2024, 5:42 a.m. UTC

From: Yang Li <[e-mail]>

Add binding document for Amlogic Bluetooth chipsets attached over UART.

Reviewed-by: Krzysztof Kozlowski <[e-mail]>
Signed-off-by: Yang Li <[e-mail]>
---
 .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml  | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)

Comments

[e-mail] Aug. 9, 2024, 6:40 a.m. UTC | #1

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=878052

---Test result---

Test Summary:
CheckPatch                    FAIL      6.16 seconds
GitLint                       PASS      0.95 seconds
SubjectPrefix                 FAIL      0.72 seconds
BuildKernel                   PASS      29.97 seconds
CheckAllWarning               PASS      32.70 seconds
CheckSparse                   PASS      37.91 seconds
CheckSmatch                   PASS      103.23 seconds
BuildKernel32                 PASS      29.10 seconds
TestRunnerSetup               PASS      527.95 seconds
TestRunner_l2cap-tester       PASS      20.03 seconds
TestRunner_iso-tester         FAIL      37.09 seconds
TestRunner_bnep-tester        PASS      4.92 seconds
TestRunner_mgmt-tester        PASS      109.18 seconds
TestRunner_rfcomm-tester      PASS      7.48 seconds
TestRunner_sco-tester         PASS      15.05 seconds
TestRunner_ioctl-tester       PASS      7.98 seconds
TestRunner_mesh-tester        PASS      6.00 seconds
TestRunner_smp-tester         PASS      8.97 seconds
TestRunner_userchan-tester    PASS      5.08 seconds
IncrementalBuild              PASS      40.12 seconds

Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v4,1/3] dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#95: 
new file mode 100644

total: 0 errors, 1 warnings, 63 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

/github/workspace/src/src/13758411.patch has style problems, please review.

NOTE: Ignored message types: UNKNOWN_COMMIT_ID

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.


[v4,2/3] Bluetooth: hci_uart: Add support for Amlogic HCI UART
WARNING: please write a help paragraph that fully describes the config symbol
#123: FILE: drivers/bluetooth/Kconfig:277:
+config BT_HCIUART_AML
+	bool "Amlogic protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	select FW_LOADER
+	help
+	  The Amlogic protocol support enables Bluetooth HCI over serial
+	  port interface for Amlogic Bluetooth controllers.
+
+	  Say Y here to compile support for HCI AML protocol.
+

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#149: 
new file mode 100644

total: 0 errors, 2 warnings, 821 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

/github/workspace/src/src/13758410.patch has style problems, please review.

NOTE: Ignored message types: UNKNOWN_COMMIT_ID

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.


##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
"Bluetooth: " prefix is not specified in the subject
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 122, Passed: 117 (95.9%), Failed: 1, Not Run: 4

Failed Test Cases
ISO Connect Suspend - Success                        Failed       8.212 seconds


---
Regards,
Linux Bluetooth

Patch

diff --git a/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml
new file mode 100644
index 000000000000..6fd7557039d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/amlogic,w155s2-bt.yaml
@@ -0,0 +1,63 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Amlogic, Inc. All rights reserved
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/amlogic,w155s2-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Bluetooth chips
+
+description:
+  The W155S2 is an Amlogic Bluetooth and Wi-Fi combo chip. It works on
+  the standard H4 protocol via a 4-wire UART interface, with baud rates
+  up to 4 Mbps.
+
+maintainers:
+  - Yang Li <[e-mail]>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,w265s1-bt
+              - amlogic,w265p1-bt
+          - const: amlogic,w155s2-bt
+      - enum:
+          - amlogic,w155s2-bt
+          - amlogic,w265s2-bt
+
+  clocks:
+    maxItems: 1
+    description: clock provided to the controller (32.768KHz)
+
+  enable-gpios:
+    maxItems: 1
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  firmware-name:
+    maxItems: 1
+    description: specify the path of firmware bin to load
+
+required:
+  - compatible
+  - clocks
+  - enable-gpios
+  - vddio-supply
+  - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    bluetooth {
+        compatible = "amlogic,w155s2-bt";
+        clocks = <&extclk>;
+        enable-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        vddio-supply = <&wcn_3v3>;
+        firmware-name = "amlogic/aml_w155s2_bt_uart.bin";
+    };
+