| Message ID | 20241204131706.20791-5-quic_janathot@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable Bluetooth on qcs6490-rb3gen2 board | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | fail | error: patch failed: drivers/power/sequencing/pwrseq-qcom-wcn.c:293 error: drivers/power/sequencing/pwrseq-qcom-wcn.c: patch does not apply hint: Use 'git am --show-current-patch' to see the failed patch |
On Wed, Dec 04, 2024 at 06:47:06PM +0530, Janaki Ramaiah Thota wrote: > Enable support for controlling the power-up sequence of the PMU inside > the WCN6750 model. > > Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> > --- > drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c > index 682a9beac69e..e38da79f0ada 100644 > --- a/drivers/power/sequencing/pwrseq-qcom-wcn.c > +++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c > @@ -293,6 +293,24 @@ static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6855_of_data = { > .targets = pwrseq_qcom_wcn6855_targets, > }; > > +static const char *const pwrseq_wcn6750_vregs[] = { > + "vddaon", > + "vddasd", > + "vddpmu", > + "vddrfa0p8", > + "vddrfa1p2", > + "vddrfa1p7", > + "vddrfa2p2", > +}; > + > +static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6750_of_data = { > + .vregs = pwrseq_wcn6750_vregs, > + .num_vregs = ARRAY_SIZE(pwrseq_wcn6750_vregs), > + .pwup_delay_ms = 50, > + .gpio_enable_delay_ms = 5, > + .targets = pwrseq_qcom_wcn_targets, > +}; > + > static const char *const pwrseq_wcn7850_vregs[] = { > "vdd", > "vddio", > @@ -431,6 +449,10 @@ static const struct of_device_id pwrseq_qcom_wcn_of_match[] = { > .compatible = "qcom,wcn7850-pmu", > .data = &pwrseq_wcn7850_of_data, > }, > + { > + .compatible = "qcom,wcn6750-pmu", Don't stuff things at the end of lists. Keep proper order instead. Best regards, Krzysztof
diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c index 682a9beac69e..e38da79f0ada 100644 --- a/drivers/power/sequencing/pwrseq-qcom-wcn.c +++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c @@ -293,6 +293,24 @@ static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6855_of_data = { .targets = pwrseq_qcom_wcn6855_targets, }; +static const char *const pwrseq_wcn6750_vregs[] = { + "vddaon", + "vddasd", + "vddpmu", + "vddrfa0p8", + "vddrfa1p2", + "vddrfa1p7", + "vddrfa2p2", +}; + +static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6750_of_data = { + .vregs = pwrseq_wcn6750_vregs, + .num_vregs = ARRAY_SIZE(pwrseq_wcn6750_vregs), + .pwup_delay_ms = 50, + .gpio_enable_delay_ms = 5, + .targets = pwrseq_qcom_wcn_targets, +}; + static const char *const pwrseq_wcn7850_vregs[] = { "vdd", "vddio", @@ -431,6 +449,10 @@ static const struct of_device_id pwrseq_qcom_wcn_of_match[] = { .compatible = "qcom,wcn7850-pmu", .data = &pwrseq_wcn7850_of_data, }, + { + .compatible = "qcom,wcn6750-pmu", + .data = &pwrseq_wcn6750_of_data, + }, { } }; MODULE_DEVICE_TABLE(of, pwrseq_qcom_wcn_of_match);
Enable support for controlling the power-up sequence of the PMU inside the WCN6750 model. Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> --- drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)