| Message ID | 20250320192929.1557825-1-luiz.dentz@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [GIT,PULL] bluetooth-next 2025-03-20 | expand |
Hi, On Thu, Mar 20, 2025 at 3:29 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: > > The following changes since commit 6855b9be9cf70d3fd4b4b9a00696eae65335320c: > > Merge branch 'mptcp-pm-prep-work-for-new-ops-and-sysctl-knobs' (2025-03-20 10:14:53 +0100) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2025-03-20 > > for you to fetch changes up to 1a6e1539e97303c60d82e3d5e163973e771a9d7f: > > Bluetooth: btnxpuart: Fix kernel panic during FW release (2025-03-20 14:59:07 -0400) > > ---------------------------------------------------------------- > bluetooth-next pull request for net-next: > > core: > > - Add support for skb TX SND/COMPLETION timestamping > - hci_core: Enable buffer flow control for SCO/eSCO > - coredump: Log devcd dumps into the monitor > > drivers: > > - btusb: Add 2 HWIDs for MT7922 > - btusb: Fix regression in the initialization of fake Bluetooth controllers > - btusb: Add 14 USB device IDs for Qualcomm WCN785x > - btintel: Add support for Intel Scorpius Peak > - btintel: Add support to configure TX power > - btintel: Add DSBR support for ScP > - btintel_pcie: Add device id of Whale Peak > - btintel_pcie: Setup buffers for firmware traces > - btintel_pcie: Read hardware exception data > - btintel_pcie: Add support for device coredump > - btintel_pcie: Trigger device coredump on hardware exception > - btnxpuart: Support for controller wakeup gpio config > - btnxpuart: Add support to set BD address > - btnxpuart: Add correct bootloader error codes > - btnxpuart: Handle bootloader error during cmd5 and cmd7 > - btnxpuart: Fix kernel panic during FW release > - qca: add WCN3950 support > - hci_qca: use the power sequencer for wcn6750 > - btmtksdio: Prevent enabling interrupts after IRQ handler removal > > ---------------------------------------------------------------- > Arkadiusz Bokowy (1): > Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters > > Arseniy Krasnov (2): > Bluetooth: hci_uart: fix race during initialization > Bluetooth: hci_uart: Fix another race during initialization > > Dan Carpenter (1): > Bluetooth: Fix error code in chan_alloc_skb_cb() > > Dmitry Baryshkov (3): > dt-bindings: net: bluetooth: qualcomm: document WCN3950 > Bluetooth: qca: simplify WCN399x NVM loading > Bluetooth: qca: add WCN3950 support > > Dorian Cruveiller (1): > Bluetooth: btusb: Add new VID/PID for WCN785x > > Douglas Anderson (1): > Bluetooth: btusb: mediatek: Add err code to btusb claim iso printout > > Dr. David Alan Gilbert (2): > Bluetooth: MGMT: Remove unused mgmt_pending_find_data > Bluetooth: MGMT: Remove unused mgmt_*_discovery_complete > > Easwar Hariharan (4): > Bluetooth: hci_vhci: convert timeouts to secs_to_jiffies() > Bluetooth: MGMT: convert timeouts to secs_to_jiffies() > Bluetooth: SMP: convert timeouts to secs_to_jiffies() > Bluetooth: L2CAP: convert timeouts to secs_to_jiffies() > > Hao Qin (1): > Bluetooth: btmtk: Remove the resetting step before downloading the fw > > Janaki Ramaiah Thota (1): > Bluetooth: hci_qca: use the power sequencer for wcn6750 > > Jeremy Clifton (1): > Bluetooth: Fix code style warning > > Jiande Lu (1): > Bluetooth: btusb: Add 2 HWIDs for MT7922 > > Kiran K (8): > Bluetooth: btintel: Add support for Intel Scorpius Peak > Bluetooth: btintel_pcie: Add device id of Whale Peak > Bluetooth: btintel: Add DSBR support for ScP > Bluetooth: btintel_pcie: Setup buffers for firmware traces > Bluetooth: btintel_pcie: Read hardware exception data > Bluetooth: btintel_pcie: Add support for device coredump > Bluetooth: btintel_pcie: Trigger device coredump on hardware exception > Bluetooth: btintel: Fix leading white space > > Loic Poulain (2): > bluetooth: btnxpuart: Support for controller wakeup gpio config > dt-bindings: net: bluetooth: nxp: Add wakeup pin properties > > Luiz Augusto von Dentz (4): > Bluetooth: btintel_pci: Fix build warning > Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO > Bluetooth: hci_vhci: Mark Sync Flow Control as supported > HCI: coredump: Log devcd dumps into the monitor > > Neeraj Sanjay Kale (7): > Bluetooth: btnxpuart: Move vendor specific initialization to .post_init > Bluetooth: btnxpuart: Add support for HCI coredump feature > dt-bindings: net: bluetooth: nxp: Add support to set BD address > Bluetooth: btnxpuart: Add support to set BD address > Bluetooth: btnxpuart: Add correct bootloader error codes > Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7 > Bluetooth: btnxpuart: Fix kernel panic during FW release > > Pauli Virtanen (5): > net-timestamp: COMPLETION timestamp on packet tx completion > Bluetooth: add support for skb TX SND/COMPLETION timestamping > Bluetooth: ISO: add TX timestamping > Bluetooth: L2CAP: add TX timestamping > Bluetooth: SCO: add TX timestamping > > Pedro Nishiyama (4): > Bluetooth: Add quirk for broken READ_VOICE_SETTING > Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE > Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken > Bluetooth: btusb: Fix regression in the initialization of fake Bluetooth controllers > > Sean Wang (1): > Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal > > Vijay Satija (1): > Bluetooth: btintel: Add support to configure TX power > > Wentao Guan (1): > Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel > > Zijun Hu (1): > Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x > > .../bindings/net/bluetooth/nxp,88w8987-bt.yaml | 18 +- > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + > Documentation/networking/timestamping.rst | 8 + > drivers/bluetooth/bfusb.c | 3 +- > drivers/bluetooth/btintel.c | 341 ++++++++++++ > drivers/bluetooth/btintel.h | 24 + > drivers/bluetooth/btintel_pcie.c | 582 ++++++++++++++++++++- > drivers/bluetooth/btintel_pcie.h | 93 ++++ > drivers/bluetooth/btmtk.c | 10 - > drivers/bluetooth/btmtksdio.c | 3 +- > drivers/bluetooth/btnxpuart.c | 407 +++++++++++--- > drivers/bluetooth/btqca.c | 27 +- > drivers/bluetooth/btqca.h | 4 + > drivers/bluetooth/btusb.c | 36 +- > drivers/bluetooth/hci_ldisc.c | 19 +- > drivers/bluetooth/hci_qca.c | 27 +- > drivers/bluetooth/hci_uart.h | 1 + > drivers/bluetooth/hci_vhci.c | 5 +- > include/linux/skbuff.h | 7 +- > include/net/bluetooth/bluetooth.h | 1 + > include/net/bluetooth/hci.h | 36 +- > include/net/bluetooth/hci_core.h | 27 +- > include/net/bluetooth/l2cap.h | 7 +- > include/uapi/linux/errqueue.h | 1 + > include/uapi/linux/net_tstamp.h | 6 +- > net/bluetooth/6lowpan.c | 9 +- > net/bluetooth/coredump.c | 28 +- > net/bluetooth/hci_conn.c | 122 +++++ > net/bluetooth/hci_core.c | 77 +-- > net/bluetooth/hci_event.c | 15 +- > net/bluetooth/hci_sync.c | 32 +- > net/bluetooth/iso.c | 24 +- > net/bluetooth/l2cap_core.c | 45 +- > net/bluetooth/l2cap_sock.c | 15 +- > net/bluetooth/mgmt.c | 46 +- > net/bluetooth/mgmt_util.c | 17 - > net/bluetooth/mgmt_util.h | 4 - > net/bluetooth/sco.c | 19 +- > net/bluetooth/smp.c | 4 +- > net/core/skbuff.c | 2 + > net/ethtool/common.c | 1 + > net/socket.c | 3 + > 42 files changed, 1890 insertions(+), 268 deletions(-) Is there a problem that these changes haven't been pulled yet?
On Mon, 24 Mar 2025 09:07:42 -0400 Luiz Augusto von Dentz wrote: > > 42 files changed, 1890 insertions(+), 268 deletions(-) > > Is there a problem that these changes haven't been pulled yet? We were behind the ML traffic by significant margin, see: https://lore.kernel.org/r/20250324075539.2b60eb42@kernel.org/ Could you please mend the Fixes tags? Commit: 25ba50076a65 ("Bluetooth: btintel: Fix leading white space") Fixes tag: Fixes: 00b3e258e1c0 ("Bluetooth: btintel_pcie: Setup buffers for firmware traces") Has these problem(s): - Target SHA1 does not exist Fixes tag: Fixes: f5d8a90511b7 ("Bluetooth: btintel: Add DSBR support for ScP") Has these problem(s): - Target SHA1 does not exist
Hi, On Tue, Mar 25, 2025 at 11:18 AM Jakub Kicinski <kuba@kernel.org> wrote: > > On Mon, 24 Mar 2025 09:07:42 -0400 Luiz Augusto von Dentz wrote: > > > 42 files changed, 1890 insertions(+), 268 deletions(-) > > > > Is there a problem that these changes haven't been pulled yet? > > We were behind the ML traffic by significant margin, see: > https://lore.kernel.org/r/20250324075539.2b60eb42@kernel.org/ > > Could you please mend the Fixes tags? > > Commit: 25ba50076a65 ("Bluetooth: btintel: Fix leading white space") > Fixes tag: Fixes: 00b3e258e1c0 ("Bluetooth: btintel_pcie: Setup buffers for firmware traces") > Has these problem(s): > - Target SHA1 does not exist > Fixes tag: Fixes: f5d8a90511b7 ("Bluetooth: btintel: Add DSBR support for ScP") > Has these problem(s): > - Target SHA1 does not exist Will do, lets me prepare another pull request.
The following changes since commit 6855b9be9cf70d3fd4b4b9a00696eae65335320c: Merge branch 'mptcp-pm-prep-work-for-new-ops-and-sysctl-knobs' (2025-03-20 10:14:53 +0100) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2025-03-20 for you to fetch changes up to 1a6e1539e97303c60d82e3d5e163973e771a9d7f: Bluetooth: btnxpuart: Fix kernel panic during FW release (2025-03-20 14:59:07 -0400) ---------------------------------------------------------------- bluetooth-next pull request for net-next: core: - Add support for skb TX SND/COMPLETION timestamping - hci_core: Enable buffer flow control for SCO/eSCO - coredump: Log devcd dumps into the monitor drivers: - btusb: Add 2 HWIDs for MT7922 - btusb: Fix regression in the initialization of fake Bluetooth controllers - btusb: Add 14 USB device IDs for Qualcomm WCN785x - btintel: Add support for Intel Scorpius Peak - btintel: Add support to configure TX power - btintel: Add DSBR support for ScP - btintel_pcie: Add device id of Whale Peak - btintel_pcie: Setup buffers for firmware traces - btintel_pcie: Read hardware exception data - btintel_pcie: Add support for device coredump - btintel_pcie: Trigger device coredump on hardware exception - btnxpuart: Support for controller wakeup gpio config - btnxpuart: Add support to set BD address - btnxpuart: Add correct bootloader error codes - btnxpuart: Handle bootloader error during cmd5 and cmd7 - btnxpuart: Fix kernel panic during FW release - qca: add WCN3950 support - hci_qca: use the power sequencer for wcn6750 - btmtksdio: Prevent enabling interrupts after IRQ handler removal ---------------------------------------------------------------- Arkadiusz Bokowy (1): Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters Arseniy Krasnov (2): Bluetooth: hci_uart: fix race during initialization Bluetooth: hci_uart: Fix another race during initialization Dan Carpenter (1): Bluetooth: Fix error code in chan_alloc_skb_cb() Dmitry Baryshkov (3): dt-bindings: net: bluetooth: qualcomm: document WCN3950 Bluetooth: qca: simplify WCN399x NVM loading Bluetooth: qca: add WCN3950 support Dorian Cruveiller (1): Bluetooth: btusb: Add new VID/PID for WCN785x Douglas Anderson (1): Bluetooth: btusb: mediatek: Add err code to btusb claim iso printout Dr. David Alan Gilbert (2): Bluetooth: MGMT: Remove unused mgmt_pending_find_data Bluetooth: MGMT: Remove unused mgmt_*_discovery_complete Easwar Hariharan (4): Bluetooth: hci_vhci: convert timeouts to secs_to_jiffies() Bluetooth: MGMT: convert timeouts to secs_to_jiffies() Bluetooth: SMP: convert timeouts to secs_to_jiffies() Bluetooth: L2CAP: convert timeouts to secs_to_jiffies() Hao Qin (1): Bluetooth: btmtk: Remove the resetting step before downloading the fw Janaki Ramaiah Thota (1): Bluetooth: hci_qca: use the power sequencer for wcn6750 Jeremy Clifton (1): Bluetooth: Fix code style warning Jiande Lu (1): Bluetooth: btusb: Add 2 HWIDs for MT7922 Kiran K (8): Bluetooth: btintel: Add support for Intel Scorpius Peak Bluetooth: btintel_pcie: Add device id of Whale Peak Bluetooth: btintel: Add DSBR support for ScP Bluetooth: btintel_pcie: Setup buffers for firmware traces Bluetooth: btintel_pcie: Read hardware exception data Bluetooth: btintel_pcie: Add support for device coredump Bluetooth: btintel_pcie: Trigger device coredump on hardware exception Bluetooth: btintel: Fix leading white space Loic Poulain (2): bluetooth: btnxpuart: Support for controller wakeup gpio config dt-bindings: net: bluetooth: nxp: Add wakeup pin properties Luiz Augusto von Dentz (4): Bluetooth: btintel_pci: Fix build warning Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO Bluetooth: hci_vhci: Mark Sync Flow Control as supported HCI: coredump: Log devcd dumps into the monitor Neeraj Sanjay Kale (7): Bluetooth: btnxpuart: Move vendor specific initialization to .post_init Bluetooth: btnxpuart: Add support for HCI coredump feature dt-bindings: net: bluetooth: nxp: Add support to set BD address Bluetooth: btnxpuart: Add support to set BD address Bluetooth: btnxpuart: Add correct bootloader error codes Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7 Bluetooth: btnxpuart: Fix kernel panic during FW release Pauli Virtanen (5): net-timestamp: COMPLETION timestamp on packet tx completion Bluetooth: add support for skb TX SND/COMPLETION timestamping Bluetooth: ISO: add TX timestamping Bluetooth: L2CAP: add TX timestamping Bluetooth: SCO: add TX timestamping Pedro Nishiyama (4): Bluetooth: Add quirk for broken READ_VOICE_SETTING Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken Bluetooth: btusb: Fix regression in the initialization of fake Bluetooth controllers Sean Wang (1): Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal Vijay Satija (1): Bluetooth: btintel: Add support to configure TX power Wentao Guan (1): Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel Zijun Hu (1): Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x .../bindings/net/bluetooth/nxp,88w8987-bt.yaml | 18 +- .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + Documentation/networking/timestamping.rst | 8 + drivers/bluetooth/bfusb.c | 3 +- drivers/bluetooth/btintel.c | 341 ++++++++++++ drivers/bluetooth/btintel.h | 24 + drivers/bluetooth/btintel_pcie.c | 582 ++++++++++++++++++++- drivers/bluetooth/btintel_pcie.h | 93 ++++ drivers/bluetooth/btmtk.c | 10 - drivers/bluetooth/btmtksdio.c | 3 +- drivers/bluetooth/btnxpuart.c | 407 +++++++++++--- drivers/bluetooth/btqca.c | 27 +- drivers/bluetooth/btqca.h | 4 + drivers/bluetooth/btusb.c | 36 +- drivers/bluetooth/hci_ldisc.c | 19 +- drivers/bluetooth/hci_qca.c | 27 +- drivers/bluetooth/hci_uart.h | 1 + drivers/bluetooth/hci_vhci.c | 5 +- include/linux/skbuff.h | 7 +- include/net/bluetooth/bluetooth.h | 1 + include/net/bluetooth/hci.h | 36 +- include/net/bluetooth/hci_core.h | 27 +- include/net/bluetooth/l2cap.h | 7 +- include/uapi/linux/errqueue.h | 1 + include/uapi/linux/net_tstamp.h | 6 +- net/bluetooth/6lowpan.c | 9 +- net/bluetooth/coredump.c | 28 +- net/bluetooth/hci_conn.c | 122 +++++ net/bluetooth/hci_core.c | 77 +-- net/bluetooth/hci_event.c | 15 +- net/bluetooth/hci_sync.c | 32 +- net/bluetooth/iso.c | 24 +- net/bluetooth/l2cap_core.c | 45 +- net/bluetooth/l2cap_sock.c | 15 +- net/bluetooth/mgmt.c | 46 +- net/bluetooth/mgmt_util.c | 17 - net/bluetooth/mgmt_util.h | 4 - net/bluetooth/sco.c | 19 +- net/bluetooth/smp.c | 4 +- net/core/skbuff.c | 2 + net/ethtool/common.c | 1 + net/socket.c | 3 + 42 files changed, 1890 insertions(+), 268 deletions(-)