diff mbox series

[v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591

Message ID 632363CB00A11519+20240622040959.7567-1-wangyuli@uniontech.com (mailing list archive)
State Accepted
Commit 678c5f69567123449987ea00b255979a4b82d1c8
Headers show
Series [v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591 | expand

Checks

Context Check Description
tedd_an/pre-ci_am success Success
tedd_an/CheckPatch success CheckPatch PASS
tedd_an/GitLint success Gitlint PASS
tedd_an/SubjectPrefix success Gitlint PASS
tedd_an/BuildKernel success BuildKernel PASS
tedd_an/CheckAllWarning success CheckAllWarning PASS
tedd_an/CheckSparse success CheckSparse PASS
tedd_an/CheckSmatch success CheckSparse PASS
tedd_an/BuildKernel32 success BuildKernel32 PASS
tedd_an/TestRunnerSetup success TestRunnerSetup PASS

Commit Message

WangYuli June 22, 2024, 4:09 a.m. UTC 
Add the support ID(0x13d3, 0x3591) to usb_device_id table for
Realtek RTL8852BE.

The device table is as follows:

T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3591 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Cc: stable@vger.kernel.org
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

patchwork-bot+bluetooth@kernel.org June 27, 2024, 7:10 p.m. UTC | #1 
Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Sat, 22 Jun 2024 12:09:59 +0800 you wrote:
> Add the support ID(0x13d3, 0x3591) to usb_device_id table for
> Realtek RTL8852BE.
> 
> The device table is as follows:
> 
> T:  Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#=  5 Spd=12   MxCh= 0
> D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=13d3 ProdID=3591 Rev= 0.00
> S:  Manufacturer=Realtek
> S:  Product=Bluetooth Radio
> S:  SerialNumber=00e04c000001
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> 
> [...]

Here is the summary with links:
  - [v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
    https://git.kernel.org/bluetooth/bluetooth-next/c/678c5f695671

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2d7d47f9d007..2d5c971a59ad 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -555,6 +555,8 @@  static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3591), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },