@@ -1 +1 @@
-Subproject commit da43eb119558fb46d86e62f3b82d5ca63546f69e
+Subproject commit bb3cee6b85b93210af5fb2c65a33f3000e341a11
@@ -333,6 +333,17 @@ if test "x$enable_coverage" != xno; then
fi
AC_SUBST(GCOV_PREFIX_STRIP, `echo $(pwd)/src | tr -dc / | wc -c`)
+# blkin (lttng+zipkin) tracing?
+AC_ARG_WITH([blkin],
+ [AS_HELP_STRING([--with-blkin], [blkin (lttng + zipkin) tracing])],
+ [],
+ [with_blkin=no])
+have_blkin=no
+AS_IF([test "x$with_blkin" == "xyes"],
+ [PKG_CHECK_MODULES([BLKIN], [blkin], [have_blkin=yes])])
+AM_CONDITIONAL(WITH_BLKIN, test "x$have_blkin" == xyes)
+AM_COND_IF([WITH_BLKIN], [AC_DEFINE([WITH_BLKIN], [1], [Defined if using BlkKin])])
+
# radosgw?
AC_ARG_WITH([radosgw],
[AS_HELP_STRING([--with-radosgw], [build RADOS gateway])],
@@ -5,6 +5,7 @@ usage() {
do_autogen.sh: make a ceph build by running autogen, etc.
-h: this help message
+-b blkin tracing
-d <level> debug build
level 0: no debug
level 1: -g
@@ -32,9 +33,11 @@ debug_level=0
verbose=0
profile=0
CONFIGURE_FLAGS="--disable-static --with-lttng"
-while getopts "d:e:hHrTPJLjpcvO:" flag
+while getopts "bd:e:hHrTPJLjpcvO:" flag
do
case $flag in
+ b) CONFIGURE_FLAGS="$CONFIGURE_FLAGS --with-blkin";;
+
d) debug_level=$OPTARG;;
O) CFLAGS="${CFLAGS} -O$OPTARG";;
new file mode 100644
@@ -0,0 +1,168 @@
+=========================
+ Tracing Ceph With BlkKin
+=========================
+
+Ceph can use Blkin, a library created by Marios Kogias and others,
+which enables tracking a specific request from the time it enters
+the system at higher levels till it is finally served by RADOS.
+
+In general, Blkin implements the Dapper_ tracing semantics
+in order to show the causal relationships between the different
+processing phases that an IO request may trigger. The goal is an
+end-to-end visualisation of the request's route in the system,
+accompanied by information concerning latencies in each processing
+phase. Thanks to LTTng this can happen with a minimal overhead and
+in realtime. The LTTng traces can then be visualized with Twitter's
+Zipkin_.
+
+.. _Dapper: http://static.googleusercontent.com/media/research.google.com/el//pubs/archive/36356.pdf
+.. _Zipkin: http://twitter.github.io/zipkin/
+
+
+Installing Blkin
+================
+
+You can install Markos Kogias' upstream Blkin_ by hand.::
+
+ cd blkin/
+ make && make install
+
+ or build
+distribution packages using DistroReadyBlkin_, which also comes
+with pkgconfig support. If you choose the latter, then you must
+generate the configure and make files first.::
+
+ cd blkin
+ autoreconf -i
+
+.. _Blkin: https://github.com/marioskogias/blkin
+.. _DistroReadyBlkin: https://github.com/agshew/blkin
+
+
+Configuring Ceph with Blkin
+===========================
+
+If you built and installed Blkin by hand, rather than building and
+installing packages, then set these variables before configuring
+Ceph.::
+
+ export BLKIN_CFLAGS=-Iblkin/
+ export BLKIN_LIBS=-lzipkin-cpp
+
+Since there are separate lttng and blkin changes to Ceph, you may
+want to configure with something like::
+
+ ./configure --with-blkin --without-lttng --with-debug
+
+
+Testing Blkin
+=============
+
+It's easy to test Ceph's Blkin tracing. Let's assume you don't have
+Ceph already running, and you compiled Ceph with Blkin support but
+you did't install it. Then launch Ceph with the ``vstart.sh`` script
+in Ceph's src directgory so you can see the possible tracepoints.::
+
+ cd src
+ OSD=3 MON=3 RGW=1 ./vstart.sh -n
+ lttng list --userspace
+
+You'll see something like the following:::
+
+ UST events:
+ -------------
+ PID: 8987 - Name: ./ceph-osd
+ zipkin:timestamp (loglevel: TRACE_WARNING (4)) (type: tracepoint)
+ zipkin:keyval (loglevel: TRACE_WARNING (4)) (type: tracepoint)
+ ust_baddr_statedump:soinfo (loglevel: TRACE_DEBUG_LINE (13)) (type: tracepoint)
+
+ PID: 8407 - Name: ./ceph-mon
+ zipkin:timestamp (loglevel: TRACE_WARNING (4)) (type: tracepoint)
+ zipkin:keyval (loglevel: TRACE_WARNING (4)) (type: tracepoint)
+ ust_baddr_statedump:soinfo (loglevel: TRACE_DEBUG_LINE (13)) (type: tracepoint)
+
+ ...
+
+Next, stop Ceph so that the tracepoints can be enabled.::
+
+ ./stop.sh
+
+Start up an LTTng session and enable the tracepoints.::
+
+ lttng create blkin-test
+ lttng enable-event --userspace zipkin:timestamp
+ lttng enable-event --userspace zipkin:keyval
+ lttng start
+
+Then start up Ceph again.::
+
+ OSD=3 MON=3 RGW=1 ./vstart.sh -n
+
+You may want to check that ceph is up.::
+
+ ./ceph status
+
+Now put something in usin rados, check that it made it, get it back, and remove it.::
+
+ ./rados mkpool test-blkin
+ ./rados put test-object-1 ./vstart.sh --pool=test-blkin
+ ./rados -p test-blkin ls
+ ./ceph osd map test-blkin test-object-1
+ ./rados get test-object-1 ./vstart-copy.sh --pool=test-blkin
+ md5sum vstart*
+ ./rados rm test-object-1 --pool=test-blkin
+
+You could also use the example in ``examples/librados/`` or ``rados bench``.
+
+Then stop the LTTng session and see what was collected.::
+
+ lttng stop
+ lttng view
+
+You'll see something like:::
+
+ [13:09:07.755054973] (+?.?????????) scruffy zipkin:timestamp: { cpu_id = 5 }, { trace_name = "Main", service_name = "MOSDOp", port_no = 0, ip = "0.0.0.0", trace_id = 7492589359882233221, span_id = 2694140257089376129, parent_span_id = 0, event = "Message allocated" }
+ [13:09:07.755071569] (+0.000016596) scruffy zipkin:keyval: { cpu_id = 5 }, { trace_name = "Main", service_name = "MOSDOp", port_no = 0, ip = "0.0.0.0", trace_id = 7492589359882233221, span_id = 2694140257089376129, parent_span_id = 0, key = "Type", val = "MOSDOp" }
+ [13:09:07.755074217] (+0.000002648) scruffy zipkin:keyval: { cpu_id = 5 }, { trace_name = "Main", service_name = "MOSDOp", port_no = 0, ip = "0.0.0.0", trace_id = 7492589359882233221, span_id = 2694140257089376129, parent_span_id = 0, key = "Reqid", val = "client.4126.0:1" }
+ ...
+
+
+Install Zipkin
+===============
+One of the points of using Blkin is so that you can look at the traces
+using Zipkin. Users should run Zipkin as a tracepoints collector and
+also a web service, which means users need to run three services,
+zipkin-collector, zipkin-query and zipkin-web.::
+
+Download Zipkin Package::
+
+ wget https://github.com/twitter/zipkin/archive/1.1.0.tar.gz
+ tar zxf 1.1.0.tar.gz
+ cd zipkin-1.1.0
+ bin/collector cassandra &
+ bin/query cassandra &
+ bin/web &
+
+Check Zipkin::
+
+ bin/test
+ Browse http://${zipkin-web-ip}:8080
+
+
+Show Ceph's Blkin Traces in Zipkin-web
+======================================
+Blkin provides a script which translates lttng result to Zipkin
+(Dapper) semantics.::
+
+Send lttng data to Zipkin::
+
+ python3 babeltrace_zipkin.py ${lttng-traces-dir}/${blkin-test}/ust/uid/0/64-bit/ -p ${zipkin-collector-port(9410 by default)} -s ${zipkin-collector-ip}
+
+Example::
+
+ python3 babeltrace_zipkin.py ~/lttng-traces-dir/blkin-test-20150225-160222/ust/uid/0/64-bit/ -p 9410 -s 127.0.0.1
+
+Check Ceph traces on webpage::
+
+ Browse http://${zipkin-web-ip}:8080
+ Click "Find traces"
@@ -188,6 +188,12 @@ if ENABLE_COVERAGE
EXTRALIBS += -lgcov
endif # ENABLE_COVERAGE
+if WITH_BLKIN
+AM_CPPFLAGS += -DWITH_BLKIN
+AM_CXXFLAGS += $(BLKIN_CFLAGS)
+EXTRALIBS += $(BLKIN_LIBS)
+endif
+
# Libosd always needs osdc and os
LIBOSD += $(LIBOSDC) $(LIBOS)
@@ -40,11 +40,25 @@ include tools/Makefile.am
# core daemons
ceph_mon_SOURCES = ceph_mon.cc
+ceph_mon_CPPFLAGS = $(AM_CPPFLAGS)
+ceph_mon_CXXFLAGS = $(AM_CXXFLAGS)
ceph_mon_LDADD = $(LIBMON) $(LIBOS) $(CEPH_GLOBAL) $(LIBCOMMON)
+if WITH_BLKIN
+ceph_mon_CPPFLAGS += -DWITH_BLKIN
+ceph_mon_CXXFLAGS += $(BLKIN_CFLAGS)
+ceph_mon_LDADD += $(BLKIN_LIBS)
+endif
bin_PROGRAMS += ceph-mon
ceph_osd_SOURCES = ceph_osd.cc
+ceph_osd_CPPFLAGS = $(AM_CPPFLAGS)
+ceph_osd_CXXFLAGS = $(AM_CXXFLAGS)
ceph_osd_LDADD = $(LIBOSD) $(CEPH_GLOBAL) $(LIBCOMMON)
+if WITH_BLKIN
+ceph_osd_CPPFLAGS += -DWITH_BLKIN
+ceph_osd_CXXFLAGS += $(BLKIN_CFLAGS)
+ceph_osd_LDADD += $(BLKIN_LIBS)
+endif
bin_PROGRAMS += ceph-osd
ceph_mds_SOURCES = ceph_mds.cc
@@ -1 +1 @@
-Subproject commit d384952c68a64d93ac7af6341d5519ea5d2958b9
+Subproject commit 39768c55bb00917691364f6f9f7bf688235aedf8
@@ -1 +1 @@
-Subproject commit 02731df4c1eae1819c4453c9d3ab6d408cadd085
+Subproject commit 8fe20c6608385d6a1f38db89aec5cba85ccf04ac
@@ -14,6 +14,8 @@ librados_la_SOURCES = \
common/buffer.cc \
librados/librados.cc
+librados_la_CPPFLAGS = $(AM_CPPFLAGS)
+
# We need this to avoid basename conflicts with the librados build tests in test/Makefile.am
librados_la_CXXFLAGS = ${AM_CXXFLAGS}
@@ -25,6 +27,13 @@ LIBRADOS_DEPS += $(LIBRADOS_TP)
endif
librados_la_LIBADD = $(LIBRADOS_DEPS) $(PTHREAD_LIBS) $(CRYPTO_LIBS) $(EXTRALIBS)
+
+if WITH_BLKIN
+librados_la_CPPFLAGS += -DWITH_BLKIN
+librados_la_CXXFLAGS += $(BLKIN_CXXFLAGS)
+librados_la_LIBADD += $(BLKIN_LIBS)
+endif
+
librados_la_LDFLAGS = ${AM_LDFLAGS} -version-info 2:0:0
if LINUX
librados_la_CXXFLAGS += -fvisibility=hidden -fvisibility-inlines-hidden
@@ -33,11 +33,19 @@ if WITH_LTTNG
librbd_la_LIBADD += $(LIBRBD_TP)
endif
+librbd_la_CPPFLAGS = $(AM_CPPFLAGS)
+librbd_la_CXXFLAGS = $(AM_CXXFLAGS)
librbd_la_LDFLAGS = ${AM_LDFLAGS} -version-info 1:0:0
if LINUX
-librbd_la_CXXFLAGS = -fvisibility=hidden -fvisibility-inlines-hidden
+librbd_la_CXXFLAGS += -fvisibility=hidden -fvisibility-inlines-hidden
librbd_la_LDFLAGS += -Xcompiler -Xlinker -Xcompiler '--exclude-libs=ALL'
endif
+
+if WITH_BLKIN
+librbd_la_CPPFLAGS += -DWITH_BLKIN
+librbd_la_CXXFLAGS += $(BLKIN_CFLAGS)
+librbd_la_LIBADD += $(BLKIN_LIBS)
+endif
lib_LTLIBRARIES += librbd.la
noinst_HEADERS += \
@@ -17,7 +17,17 @@ libmon_la_SOURCES = \
mon/HealthMonitor.cc \
mon/DataHealthService.cc \
mon/ConfigKeyService.cc
+
+libmon_la_CPPFLAGS = $(AM_CPPFLAGS)
+libmon_la_CXXFLAGS = $(AM_CXXFLAGS)
libmon_la_LIBADD = $(LIBAUTH) $(LIBCOMMON) $(LIBOS) $(LIBMON_TYPES)
+
+if WITH_BLKIN
+libmon_la_CPPFLAGS += -DWITH_BLKIN
+libmon_la_CXXFLAGS += $(BLKIN_CFLAGS)
+libmon_la_LIBADD += $(BLKIN_LIBS)
+endif
+
noinst_LTLIBRARIES += libmon.la
noinst_HEADERS += \
@@ -46,4 +56,3 @@ noinst_HEADERS += \
mon/QuorumService.h \
mon/Session.h \
mon/mon_types.h
-
@@ -3,6 +3,14 @@ libmsg_la_SOURCES = \
msg/Messenger.cc \
msg/msg_types.cc
+libmsg_la_CPPFLAGS = $(AM_CPPFLAGS)
+libmsg_la_CXXFLAGS = $(AM_CXXFLAGS)
+if WITH_BLKIN
+libmsg_la_CPPFLAGS += -DWITH_BLKIN
+libmsg_la_CXXFLAGS += $(BLKIN_CFLAGS)
+libmsg_la_LIBADD = $(BLKIN_LIBS)
+endif
+
noinst_HEADERS += \
msg/Connection.h \
msg/Dispatcher.h \
@@ -36,12 +36,20 @@ if WITH_LIBZFS
libos_la_SOURCES += os/ZFSFileStoreBackend.cc
endif
+libos_la_CPPFLAGS = $(AM_CPPFLAGS)
libos_la_CXXFLAGS = ${AM_CXXFLAGS}
libos_la_LIBADD = $(LIBOS_TYPES)
+
if WITH_LTTNG
libos_la_LIBADD += $(LIBOS_TP)
endif
+if WITH_BLKIN
+libos_la_CPPFLAGS += -DWITH_BLKIN
+libos_la_CXXFLAGS += $(BLKIN_CFLAGS)
+libos_la_LIBADD += $(BLKIN_LIBS)
+endif
+
noinst_LTLIBRARIES += libos.la
noinst_HEADERS += \
@@ -24,11 +24,20 @@ libosd_la_SOURCES = \
osd/SnapMapper.cc \
objclass/class_api.cc
+libosd_la_CPPFLAGS = $(AM_CPPFLAGS)
libosd_la_CXXFLAGS = ${AM_CXXFLAGS}
libosd_la_LIBADD = $(LIBOSDC) $(LIBOS) $(LIBOSD_TYPES) $(LIBOS_TYPES)
+
if WITH_LTTNG
libosd_la_LIBADD += $(LIBOSD_TP)
endif
+
+if WITH_BLKIN
+libosd_la_CPPFLAGS += -DWITH_BLKIN
+libosd_la_CXXFLAGS += $(BLKIN_CFLAGS)
+libosd_la_LIBADD += $(BLKIN_LIBS)
+endif
+
noinst_LTLIBRARIES += libosd.la
noinst_HEADERS += \
@@ -4,6 +4,15 @@ libosdc_la_SOURCES = \
osdc/Filer.cc \
osdc/Striper.cc \
osdc/Journaler.cc
+
+libosdc_la_CPPFLAGS = $(AM_CPPFLAGS)
+libosdc_la_CXXFLAGS = $(AM_CXXFLAGS)
+if WITH_BLKIN
+libosdc_la_CPPFLAGS += -DWITH_BLKIN
+libosdc_la_CXXFLAGS += $(BLKIN_CFLAGS)
+libosdc_la_LIBADD = $(BLKIN_LIBS)
+endif
+
noinst_LTLIBRARIES += libosdc.la
noinst_HEADERS += \