mbox series

[v5,0/5] ChromeOS Embedded Controller charge control driver

Message ID 20240630-cros_ec-charge-control-v5-0-8f649d018c52@weissschuh.net (mailing list archive)
Headers show
Series ChromeOS Embedded Controller charge control driver | expand

Message

Thomas Weißschuh June 30, 2024, 8:54 p.m. UTC
Tzung-Bi, this series now has Acks from all involved maintainers.
The only open question is on how to handle the incompatibility with the
Framework-specific commands.
But the currently implemented solution is the most safe one;
so in my opinion this series could be applied as is and then we can
always relax that restriction later.

--

Add a power supply driver that supports charge thresholds and behaviour
configuration.

This is a complete rework of
"platform/chrome: cros_ec_framework_laptop: new driver" [1], which used
Framework specific EC commands.

The driver propsed in this series only uses upstream CrOS EC functionality.

Tested on a Framework 13 AMD, Firmware 3.05.

This driver should go through the chrome-platform tree.
Otherwise "platform/chrome: cros_ec_proto: Introduce cros_ec_cmd_versions()"
will conflict with
commit a14a569a9918 ("platform/chrome: cros_ec_proto: Introduce cros_ec_cmd_readmem()")
from chrome-platform/for-next.

The patch
"platform/chrome: cros_ec_proto: Introduce cros_ec_cmd_versions()"
is also part of my series
"hwmon: (cros_ec): fan target, fan pwm control and temperature thresholds"[2].

To be useful, this series depends on
commit 08dbad2c7c32 ("mfd: cros_ec: Register charge control subdevice")
from the MFD tree [0].

Based on chrome-platform/for-next.

[0] https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/commit/?h=for-mfd-next&id=08dbad2c7c3275e0e79190dca139bc65ce775a92
[1] https://lore.kernel.org/lkml/20240505-cros_ec-framework-v1-0-402662d6276b@weissschuh.net/
[2] https://lore.kernel.org/lkml/20240608-cros_ec-hwmon-pwm-v1-0-d29dfc26fbc3@weissschuh.net/

Changes in v5:
- Pick up Ack from Sebastian
- Some tiny cosmetic changes:
  - Drop trailing comma after sentinel entry of enum CROS_CHCTL_ATTR
  - Properly terminate battery hook assignments with semicolon instead
    of comma
  - Inline #define DRV_NAME
  - Drop space from struct initializer: { } -> {}
- Link to v4: https://lore.kernel.org/r/20240616-cros_ec-charge-control-v4-0-74d649a9117d@weissschuh.net

Changes in v4:
- Rename cros_ec_cmd_versions() to cros_ec_get_cmd_versions()
- Use EC_CMD_GET_CMD_VERSIONS v0 in cros_ec_get_cmd_versions() if possible
- Drop now unnecessary EOPNOTSUPP check after initial configuration
- Collect review tags
- Link to v3: https://lore.kernel.org/r/20240610-cros_ec-charge-control-v3-0-135e37252094@weissschuh.net

Changes in v3:
- Drop MFD patch that was already applied
  (therefore drop Lee from series recipients)
- Introduce and use devm_battery_hook_register()
- Note that the driver should go through the chrome-platform tree
- Introduce and use cros_ec_cmd_versions()
- Drop logging about impossible charge behaviours
- Use sysfs_attr_init()
- Disable probing on incompatible Framework devices by default
- Link to v2: https://lore.kernel.org/r/20240528-cros_ec-charge-control-v2-0-81fb27e1cff4@weissschuh.net

Changes in v2:
- Accept "0" as charge_start_threshold
- Don't include linux/kernel.h
- Only bind to the first found battery
- Import EC_CMD_CHARGE_CONTROL v3 headers
- Add support for v1 and v3 commands
- Sort mfd cell entry alphabetically
- Link to v1: https://lore.kernel.org/r/20240519-cros_ec-charge-control-v1-0-baf305dc79b8@weissschuh.net

---
Thomas Weißschuh (5):
      ACPI: battery: add devm_battery_hook_register()
      platform/chrome: Update binary interface for EC-based charge control
      platform/chrome: cros_ec_proto: Introduce cros_ec_get_cmd_versions()
      power: supply: add ChromeOS EC based charge control driver
      power: supply: cros_charge-control: don't load if Framework control is present

 MAINTAINERS                                    |   6 +
 drivers/acpi/battery.c                         |  15 ++
 drivers/platform/chrome/cros_ec_proto.c        |  35 +++
 drivers/power/supply/Kconfig                   |  12 +
 drivers/power/supply/Makefile                  |   1 +
 drivers/power/supply/cros_charge-control.c     | 354 +++++++++++++++++++++++++
 include/acpi/battery.h                         |   2 +
 include/linux/platform_data/cros_ec_commands.h |  49 +++-
 include/linux/platform_data/cros_ec_proto.h    |   2 +
 9 files changed, 474 insertions(+), 2 deletions(-)
---
base-commit: 1c34ab03323fb03329cf8d9b8804b9501cd1bbf3
change-id: 20240506-cros_ec-charge-control-685617e8ed87

Best regards,

Comments

Tzung-Bi Shih July 1, 2024, 1:25 p.m. UTC | #1
On Sun, Jun 30, 2024 at 10:54:07PM +0200, Thomas Weißschuh wrote:
> Add a power supply driver that supports charge thresholds and behaviour
> configuration.
> 
> This is a complete rework of
> "platform/chrome: cros_ec_framework_laptop: new driver" [1], which used
> Framework specific EC commands.
> 
> The driver propsed in this series only uses upstream CrOS EC functionality.
> 
> Tested on a Framework 13 AMD, Firmware 3.05.
> 
> [...]

Applied to

    https://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux.git for-next

Thanks!