diff mbox series

[26/38] ASoC: cros_ec_codec: Add endianness flag in i2s_rx_component_driver

Message ID 20220504170905.332415-27-ckeepax@opensource.cirrus.com (mailing list archive)
State Handled Elsewhere
Headers show
Series Clean up usage of the endianness flag | expand

Commit Message

Charles Keepax May 4, 2022, 5:08 p.m. UTC
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. The i2s_rx component receives audio over an I2S DAI and as such
should have endianness applied.

A fixup is also required to use the width directly rather than relying
on the format in hw_params, now both little and big endian would be
supported.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/cros_ec_codec.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
index 9b92e1a0d1a3a..8b0a9c788a264 100644
--- a/sound/soc/codecs/cros_ec_codec.c
+++ b/sound/soc/codecs/cros_ec_codec.c
@@ -232,11 +232,11 @@  static int i2s_rx_hw_params(struct snd_pcm_substream *substream,
 	if (params_rate(params) != 48000)
 		return -EINVAL;
 
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S16_LE:
+	switch (params_width(params)) {
+	case 16:
 		depth = EC_CODEC_I2S_RX_SAMPLE_DEPTH_16;
 		break;
-	case SNDRV_PCM_FORMAT_S24_LE:
+	case 24:
 		depth = EC_CODEC_I2S_RX_SAMPLE_DEPTH_24;
 		break;
 	default:
@@ -387,6 +387,7 @@  static const struct snd_soc_component_driver i2s_rx_component_driver = {
 	.num_dapm_widgets	= ARRAY_SIZE(i2s_rx_dapm_widgets),
 	.dapm_routes		= i2s_rx_dapm_routes,
 	.num_dapm_routes	= ARRAY_SIZE(i2s_rx_dapm_routes),
+	.endianness		= 1,
 };
 
 static void *wov_map_shm(struct cros_ec_codec_priv *priv,