diff mbox series

[v2,2/9] remoteproc: mediatek: Support hanlding scp core 1 wdt timeout

Message ID 20220608083553.8697-3-tinghan.shen@mediatek.com (mailing list archive)
State Handled Elsewhere
Headers show
Series Add support for MT8195 SCP 2nd core | expand

Commit Message

Tinghan Shen June 8, 2022, 8:35 a.m. UTC
MT8195 SCP is a dual-core processor. The SCP core 1 watchdog timeout
interrupt uses the same interrupt line of SCP core 0 watchdog timeout
interrupt.

Add support for handling SCP core 1 watchdog timeout interrupt in the
SCP IRQ handler.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
 drivers/remoteproc/mtk_common.h |  4 ++++
 drivers/remoteproc/mtk_scp.c    | 27 ++++++++++++++++++++++++++-
 2 files changed, 30 insertions(+), 1 deletion(-)

Comments

Mathieu Poirier Aug. 29, 2022, 5:40 p.m. UTC | #1
Hi Tinghan,

I have started reviewing this set and I expect comments to be spread out over a few
days.  I will tell you when I am done.

Please see below for comments...

On Wed, Jun 08, 2022 at 04:35:46PM +0800, Tinghan Shen wrote:
> MT8195 SCP is a dual-core processor. The SCP core 1 watchdog timeout
> interrupt uses the same interrupt line of SCP core 0 watchdog timeout
> interrupt.
> 
> Add support for handling SCP core 1 watchdog timeout interrupt in the
> SCP IRQ handler.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
>  drivers/remoteproc/mtk_common.h |  4 ++++
>  drivers/remoteproc/mtk_scp.c    | 27 ++++++++++++++++++++++++++-
>  2 files changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
> index ea6fa1100a00..73e8adf00de3 100644
> --- a/drivers/remoteproc/mtk_common.h
> +++ b/drivers/remoteproc/mtk_common.h
> @@ -54,6 +54,10 @@
>  #define MT8192_CORE0_WDT_IRQ		0x10030
>  #define MT8192_CORE0_WDT_CFG		0x10034
>  
> +#define MT8195_SYS_STATUS		0x4004
> +#define MT8195_CORE0_WDT		BIT(16)
> +#define MT8195_CORE1_WDT		BIT(17)
> +
>  #define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS		GENMASK(7, 4)
>  
>  #define SCP_FW_VER_LEN			32
> diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
> index 47b2a40e1b4a..3510c6d0bbc8 100644
> --- a/drivers/remoteproc/mtk_scp.c
> +++ b/drivers/remoteproc/mtk_scp.c
> @@ -212,6 +212,31 @@ static void mt8192_scp_irq_handler(struct mtk_scp *scp)
>  	}
>  }
>  
> +static void mt8195_scp_irq_handler(struct mtk_scp *scp)
> +{
> +	u32 scp_to_host;
> +
> +	scp_to_host = readl(scp->reg_base + MT8192_SCP2APMCU_IPC_SET);
> +
> +	if (scp_to_host & MT8192_SCP_IPC_INT_BIT) {
> +		scp_ipi_handler(scp);
> +
> +		/*
> +		 * SCP won't send another interrupt until we clear
> +		 * MT8192_SCP2APMCU_IPC.
> +		 */
> +		writel(MT8192_SCP_IPC_INT_BIT,
> +		       scp->reg_base + MT8192_SCP2APMCU_IPC_CLR);
> +	} else {
> +		if (readl(scp->reg_base + MT8195_SYS_STATUS) & MT8195_CORE1_WDT) {
> +			writel(1, scp->reg_base + MT8195_CORE1_WDT_IRQ);
> +		} else {
> +			writel(1, scp->reg_base + MT8192_CORE0_WDT_IRQ);
> +			scp_wdt_handler(scp, scp_to_host);

Why is scp_wdt_handler() not called when CORE1 signals a watchdog failure?  If
this is the intended behaviour there is no way for anyone but you to know that
it is the case.  

> +		}
> +	}
> +}
> +
>  static irqreturn_t scp_irq_handler(int irq, void *priv)
>  {
>  	struct mtk_scp *scp = priv;
> @@ -961,7 +986,7 @@ static const struct mtk_scp_of_data mt8192_of_data = {
>  static const struct mtk_scp_of_data mt8195_of_data = {
>  	.scp_clk_get = mt8195_scp_clk_get,
>  	.scp_before_load = mt8195_scp_before_load,
> -	.scp_irq_handler = mt8192_scp_irq_handler,
> +	.scp_irq_handler = mt8195_scp_irq_handler,
>  	.scp_reset_assert = mt8192_scp_reset_assert,
>  	.scp_reset_deassert = mt8192_scp_reset_deassert,
>  	.scp_stop = mt8195_scp_stop,
> -- 
> 2.18.0
>
Tinghan Shen Sept. 8, 2022, 10:38 a.m. UTC | #2
Hi Mathieu,

> Hi Tinghan,
> 
> I have started reviewing this set and I expect comments to be spread out over a few
> days.  I will tell you when I am done.
> 
> Please see below for comments...
> 
> On Wed, Jun 08, 2022 at 04:35:46PM +0800, Tinghan Shen wrote:
> > MT8195 SCP is a dual-core processor. The SCP core 1 watchdog timeout
> > interrupt uses the same interrupt line of SCP core 0 watchdog timeout
> > interrupt.
> > 
> > Add support for handling SCP core 1 watchdog timeout interrupt in the
> > SCP IRQ handler.
> > 
> > Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> > ---
> >  drivers/remoteproc/mtk_common.h |  4 ++++
> >  drivers/remoteproc/mtk_scp.c    | 27 ++++++++++++++++++++++++++-
> >  2 files changed, 30 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
> > index ea6fa1100a00..73e8adf00de3 100644
> > --- a/drivers/remoteproc/mtk_common.h
> > +++ b/drivers/remoteproc/mtk_common.h
> > @@ -54,6 +54,10 @@
> >  #define MT8192_CORE0_WDT_IRQ		0x10030
> >  #define MT8192_CORE0_WDT_CFG		0x10034
> >  
> > +#define MT8195_SYS_STATUS		0x4004
> > +#define MT8195_CORE0_WDT		BIT(16)
> > +#define MT8195_CORE1_WDT		BIT(17)
> > +
> >  #define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS		GENMASK(7, 4)
> >  
> >  #define SCP_FW_VER_LEN			32
> > diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
> > index 47b2a40e1b4a..3510c6d0bbc8 100644
> > --- a/drivers/remoteproc/mtk_scp.c
> > +++ b/drivers/remoteproc/mtk_scp.c
> > @@ -212,6 +212,31 @@ static void mt8192_scp_irq_handler(struct mtk_scp *scp)
> >  	}
> >  }
> >  
> > +static void mt8195_scp_irq_handler(struct mtk_scp *scp)
> > +{
> > +	u32 scp_to_host;
> > +
> > +	scp_to_host = readl(scp->reg_base + MT8192_SCP2APMCU_IPC_SET);
> > +
> > +	if (scp_to_host & MT8192_SCP_IPC_INT_BIT) {
> > +		scp_ipi_handler(scp);
> > +
> > +		/*
> > +		 * SCP won't send another interrupt until we clear
> > +		 * MT8192_SCP2APMCU_IPC.
> > +		 */
> > +		writel(MT8192_SCP_IPC_INT_BIT,
> > +		       scp->reg_base + MT8192_SCP2APMCU_IPC_CLR);
> > +	} else {
> > +		if (readl(scp->reg_base + MT8195_SYS_STATUS) & MT8195_CORE1_WDT) {
> > +			writel(1, scp->reg_base + MT8195_CORE1_WDT_IRQ);
> > +		} else {
> > +			writel(1, scp->reg_base + MT8192_CORE0_WDT_IRQ);
> > +			scp_wdt_handler(scp, scp_to_host);
> 
> Why is scp_wdt_handler() not called when CORE1 signals a watchdog failure?  If
> this is the intended behaviour there is no way for anyone but you to know that
> it is the case.  

It's becuase the handler of CORE1 timeout doesn't exist at this patch.
The CORE1 timeout handler is added at patch 7 of this series.

You're right. This makes people confused.
I'll combine this patch with the CORE1 timeout handler.

Best regards,
TingHan
diff mbox series

Patch

diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
index ea6fa1100a00..73e8adf00de3 100644
--- a/drivers/remoteproc/mtk_common.h
+++ b/drivers/remoteproc/mtk_common.h
@@ -54,6 +54,10 @@ 
 #define MT8192_CORE0_WDT_IRQ		0x10030
 #define MT8192_CORE0_WDT_CFG		0x10034
 
+#define MT8195_SYS_STATUS		0x4004
+#define MT8195_CORE0_WDT		BIT(16)
+#define MT8195_CORE1_WDT		BIT(17)
+
 #define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS		GENMASK(7, 4)
 
 #define SCP_FW_VER_LEN			32
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 47b2a40e1b4a..3510c6d0bbc8 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -212,6 +212,31 @@  static void mt8192_scp_irq_handler(struct mtk_scp *scp)
 	}
 }
 
+static void mt8195_scp_irq_handler(struct mtk_scp *scp)
+{
+	u32 scp_to_host;
+
+	scp_to_host = readl(scp->reg_base + MT8192_SCP2APMCU_IPC_SET);
+
+	if (scp_to_host & MT8192_SCP_IPC_INT_BIT) {
+		scp_ipi_handler(scp);
+
+		/*
+		 * SCP won't send another interrupt until we clear
+		 * MT8192_SCP2APMCU_IPC.
+		 */
+		writel(MT8192_SCP_IPC_INT_BIT,
+		       scp->reg_base + MT8192_SCP2APMCU_IPC_CLR);
+	} else {
+		if (readl(scp->reg_base + MT8195_SYS_STATUS) & MT8195_CORE1_WDT) {
+			writel(1, scp->reg_base + MT8195_CORE1_WDT_IRQ);
+		} else {
+			writel(1, scp->reg_base + MT8192_CORE0_WDT_IRQ);
+			scp_wdt_handler(scp, scp_to_host);
+		}
+	}
+}
+
 static irqreturn_t scp_irq_handler(int irq, void *priv)
 {
 	struct mtk_scp *scp = priv;
@@ -961,7 +986,7 @@  static const struct mtk_scp_of_data mt8192_of_data = {
 static const struct mtk_scp_of_data mt8195_of_data = {
 	.scp_clk_get = mt8195_scp_clk_get,
 	.scp_before_load = mt8195_scp_before_load,
-	.scp_irq_handler = mt8192_scp_irq_handler,
+	.scp_irq_handler = mt8195_scp_irq_handler,
 	.scp_reset_assert = mt8192_scp_reset_assert,
 	.scp_reset_deassert = mt8192_scp_reset_deassert,
 	.scp_stop = mt8195_scp_stop,