| Message ID | 20220717175801.78668-4-sam@ravnborg.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | drm bridge updates | expand |
On Sun, 17 Jul 2022 at 18:58, Sam Ravnborg <sam@ravnborg.org> wrote: > > All users are converted over to drm_bridge_funcs.atomic_check() > so it is safe to drop the mode_fixup support. > > Update the comment for atomic_check with relevant parts from mode_fixup. > > Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Thomas Zimmermann <tzimmermann@suse.de> > Cc: David Airlie <airlied@linux.ie> > Cc: Daniel Vetter <daniel@ffwll.ch> > --- > drivers/gpu/drm/drm_bridge.c | 7 +---- > include/drm/drm_bridge.h | 60 ++++++++++-------------------------- > 2 files changed, 17 insertions(+), 50 deletions(-) > > diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c > index b6f56d8f3547..3f5acb19957c 100644 > --- a/drivers/gpu/drm/drm_bridge.c > +++ b/drivers/gpu/drm/drm_bridge.c > @@ -685,10 +685,6 @@ static int drm_atomic_bridge_check(struct drm_bridge *bridge, > crtc_state, conn_state); > if (ret) > return ret; > - } else if (bridge->funcs->mode_fixup) { > - if (!bridge->funcs->mode_fixup(bridge, &crtc_state->mode, > - &crtc_state->adjusted_mode)) > - return -EINVAL; > } > > return 0; > @@ -934,8 +930,7 @@ drm_atomic_bridge_propagate_bus_flags(struct drm_bridge *bridge, > * @conn_state: new connector state > * > * First trigger a bus format negotiation before calling > - * &drm_bridge_funcs.atomic_check() (falls back on > - * &drm_bridge_funcs.mode_fixup()) op for all the bridges in the encoder chain, > + * &drm_bridge_funcs.atomic_check() op for all the bridges in the encoder chain, > * starting from the last bridge to the first. These are called before calling > * &drm_encoder_helper_funcs.atomic_check() > * > diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h > index 7496f41535b1..8c93369bcc74 100644 > --- a/include/drm/drm_bridge.h > +++ b/include/drm/drm_bridge.h > @@ -106,7 +106,7 @@ struct drm_bridge_funcs { > * to look at anything else but the passed-in mode, and validate it > * against configuration-invariant hardward constraints. Any further > * limits which depend upon the configuration can only be checked in > - * @mode_fixup. > + * @atomic_check. > * > * RETURNS: > * > @@ -116,46 +116,6 @@ struct drm_bridge_funcs { > const struct drm_display_info *info, > const struct drm_display_mode *mode); > > - /** > - * @mode_fixup: > - * > - * This callback is used to validate and adjust a mode. The parameter > - * mode is the display mode that should be fed to the next element in > - * the display chain, either the final &drm_connector or the next > - * &drm_bridge. The parameter adjusted_mode is the input mode the bridge > - * requires. It can be modified by this callback and does not need to > - * match mode. See also &drm_crtc_state.adjusted_mode for more details. > - * > - * This is the only hook that allows a bridge to reject a modeset. If > - * this function passes all other callbacks must succeed for this > - * configuration. > - * > - * The mode_fixup callback is optional. &drm_bridge_funcs.mode_fixup() > - * is not called when &drm_bridge_funcs.atomic_check() is implemented, > - * so only one of them should be provided. > - * > - * NOTE: > - * > - * This function is called in the check phase of atomic modesets, which > - * can be aborted for any reason (including on userspace's request to > - * just check whether a configuration would be possible). Drivers MUST > - * NOT touch any persistent state (hardware or software) or data > - * structures except the passed in @state parameter. > - * > - * Also beware that userspace can request its own custom modes, neither > - * core nor helpers filter modes to the list of probe modes reported by > - * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure > - * that modes are filtered consistently put any bridge constraints and > - * limits checks into @mode_valid. > - * > - * RETURNS: > - * > - * True if an acceptable configuration is possible, false if the modeset > - * operation should be rejected. > - */ > - bool (*mode_fixup)(struct drm_bridge *bridge, > - const struct drm_display_mode *mode, > - struct drm_display_mode *adjusted_mode); > /** > * @disable: > * > @@ -466,9 +426,7 @@ struct drm_bridge_funcs { > * &drm_bridge_funcs.atomic_check() hooks are called in reverse > * order (from the last to the first bridge). > * > - * This method is optional. &drm_bridge_funcs.mode_fixup() is not > - * called when &drm_bridge_funcs.atomic_check() is implemented, so only > - * one of them should be provided. > + * This method is optional. > * > * If drivers need to tweak &drm_bridge_state.input_bus_cfg.flags or > * &drm_bridge_state.output_bus_cfg.flags it should happen in > @@ -478,6 +436,20 @@ struct drm_bridge_funcs { > * &drm_connector.display_info.bus_flags if the bridge is the last > * element in the chain. > * > + * NOTE: > + * > + * This function is called in the check phase of atomic modesets, which > + * can be aborted for any reason (including on userspace's request to > + * just check whether a configuration would be possible). Drivers MUST > + * NOT touch any persistent state (hardware or software) or data > + * structures except the passed in @state parameter. > + * > + * Also beware that userspace can request its own custom modes, neither > + * core nor helpers filter modes to the list of probe modes reported by > + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure > + * that modes are filtered consistently put any bridge constraints and > + * limits checks into @mode_valid. > + * > * RETURNS: > * zero if the check passed, a negative error code otherwise. > */ > -- > 2.34.1 >
Hi Sam, Thank you for the patch. On Sun, Jul 17, 2022 at 07:58:00PM +0200, Sam Ravnborg wrote: > All users are converted over to drm_bridge_funcs.atomic_check() > so it is safe to drop the mode_fixup support. > > Update the comment for atomic_check with relevant parts from mode_fixup. > > Signed-off-by: Sam Ravnborg <sam@ravnborg.org> > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Thomas Zimmermann <tzimmermann@suse.de> > Cc: David Airlie <airlied@linux.ie> > Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > drivers/gpu/drm/drm_bridge.c | 7 +---- > include/drm/drm_bridge.h | 60 ++++++++++-------------------------- > 2 files changed, 17 insertions(+), 50 deletions(-) > > diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c > index b6f56d8f3547..3f5acb19957c 100644 > --- a/drivers/gpu/drm/drm_bridge.c > +++ b/drivers/gpu/drm/drm_bridge.c > @@ -685,10 +685,6 @@ static int drm_atomic_bridge_check(struct drm_bridge *bridge, > crtc_state, conn_state); > if (ret) > return ret; > - } else if (bridge->funcs->mode_fixup) { > - if (!bridge->funcs->mode_fixup(bridge, &crtc_state->mode, > - &crtc_state->adjusted_mode)) > - return -EINVAL; > } > > return 0; > @@ -934,8 +930,7 @@ drm_atomic_bridge_propagate_bus_flags(struct drm_bridge *bridge, > * @conn_state: new connector state > * > * First trigger a bus format negotiation before calling > - * &drm_bridge_funcs.atomic_check() (falls back on > - * &drm_bridge_funcs.mode_fixup()) op for all the bridges in the encoder chain, > + * &drm_bridge_funcs.atomic_check() op for all the bridges in the encoder chain, > * starting from the last bridge to the first. These are called before calling > * &drm_encoder_helper_funcs.atomic_check() > * > diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h > index 7496f41535b1..8c93369bcc74 100644 > --- a/include/drm/drm_bridge.h > +++ b/include/drm/drm_bridge.h > @@ -106,7 +106,7 @@ struct drm_bridge_funcs { > * to look at anything else but the passed-in mode, and validate it > * against configuration-invariant hardward constraints. Any further > * limits which depend upon the configuration can only be checked in > - * @mode_fixup. > + * @atomic_check. > * > * RETURNS: > * > @@ -116,46 +116,6 @@ struct drm_bridge_funcs { > const struct drm_display_info *info, > const struct drm_display_mode *mode); > > - /** > - * @mode_fixup: > - * > - * This callback is used to validate and adjust a mode. The parameter > - * mode is the display mode that should be fed to the next element in > - * the display chain, either the final &drm_connector or the next > - * &drm_bridge. The parameter adjusted_mode is the input mode the bridge > - * requires. It can be modified by this callback and does not need to > - * match mode. See also &drm_crtc_state.adjusted_mode for more details. > - * > - * This is the only hook that allows a bridge to reject a modeset. If > - * this function passes all other callbacks must succeed for this > - * configuration. > - * > - * The mode_fixup callback is optional. &drm_bridge_funcs.mode_fixup() > - * is not called when &drm_bridge_funcs.atomic_check() is implemented, > - * so only one of them should be provided. > - * > - * NOTE: > - * > - * This function is called in the check phase of atomic modesets, which > - * can be aborted for any reason (including on userspace's request to > - * just check whether a configuration would be possible). Drivers MUST > - * NOT touch any persistent state (hardware or software) or data > - * structures except the passed in @state parameter. > - * > - * Also beware that userspace can request its own custom modes, neither > - * core nor helpers filter modes to the list of probe modes reported by > - * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure > - * that modes are filtered consistently put any bridge constraints and > - * limits checks into @mode_valid. > - * > - * RETURNS: > - * > - * True if an acceptable configuration is possible, false if the modeset > - * operation should be rejected. > - */ > - bool (*mode_fixup)(struct drm_bridge *bridge, > - const struct drm_display_mode *mode, > - struct drm_display_mode *adjusted_mode); > /** > * @disable: > * > @@ -466,9 +426,7 @@ struct drm_bridge_funcs { > * &drm_bridge_funcs.atomic_check() hooks are called in reverse > * order (from the last to the first bridge). > * > - * This method is optional. &drm_bridge_funcs.mode_fixup() is not > - * called when &drm_bridge_funcs.atomic_check() is implemented, so only > - * one of them should be provided. > + * This method is optional. > * > * If drivers need to tweak &drm_bridge_state.input_bus_cfg.flags or > * &drm_bridge_state.output_bus_cfg.flags it should happen in > @@ -478,6 +436,20 @@ struct drm_bridge_funcs { > * &drm_connector.display_info.bus_flags if the bridge is the last > * element in the chain. > * > + * NOTE: > + * > + * This function is called in the check phase of atomic modesets, which > + * can be aborted for any reason (including on userspace's request to > + * just check whether a configuration would be possible). Drivers MUST > + * NOT touch any persistent state (hardware or software) or data > + * structures except the passed in @state parameter. > + * > + * Also beware that userspace can request its own custom modes, neither > + * core nor helpers filter modes to the list of probe modes reported by > + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure > + * that modes are filtered consistently put any bridge constraints and > + * limits checks into @mode_valid. > + * > * RETURNS: > * zero if the check passed, a negative error code otherwise. > */
diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c index b6f56d8f3547..3f5acb19957c 100644 --- a/drivers/gpu/drm/drm_bridge.c +++ b/drivers/gpu/drm/drm_bridge.c @@ -685,10 +685,6 @@ static int drm_atomic_bridge_check(struct drm_bridge *bridge, crtc_state, conn_state); if (ret) return ret; - } else if (bridge->funcs->mode_fixup) { - if (!bridge->funcs->mode_fixup(bridge, &crtc_state->mode, - &crtc_state->adjusted_mode)) - return -EINVAL; } return 0; @@ -934,8 +930,7 @@ drm_atomic_bridge_propagate_bus_flags(struct drm_bridge *bridge, * @conn_state: new connector state * * First trigger a bus format negotiation before calling - * &drm_bridge_funcs.atomic_check() (falls back on - * &drm_bridge_funcs.mode_fixup()) op for all the bridges in the encoder chain, + * &drm_bridge_funcs.atomic_check() op for all the bridges in the encoder chain, * starting from the last bridge to the first. These are called before calling * &drm_encoder_helper_funcs.atomic_check() * diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 7496f41535b1..8c93369bcc74 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -106,7 +106,7 @@ struct drm_bridge_funcs { * to look at anything else but the passed-in mode, and validate it * against configuration-invariant hardward constraints. Any further * limits which depend upon the configuration can only be checked in - * @mode_fixup. + * @atomic_check. * * RETURNS: * @@ -116,46 +116,6 @@ struct drm_bridge_funcs { const struct drm_display_info *info, const struct drm_display_mode *mode); - /** - * @mode_fixup: - * - * This callback is used to validate and adjust a mode. The parameter - * mode is the display mode that should be fed to the next element in - * the display chain, either the final &drm_connector or the next - * &drm_bridge. The parameter adjusted_mode is the input mode the bridge - * requires. It can be modified by this callback and does not need to - * match mode. See also &drm_crtc_state.adjusted_mode for more details. - * - * This is the only hook that allows a bridge to reject a modeset. If - * this function passes all other callbacks must succeed for this - * configuration. - * - * The mode_fixup callback is optional. &drm_bridge_funcs.mode_fixup() - * is not called when &drm_bridge_funcs.atomic_check() is implemented, - * so only one of them should be provided. - * - * NOTE: - * - * This function is called in the check phase of atomic modesets, which - * can be aborted for any reason (including on userspace's request to - * just check whether a configuration would be possible). Drivers MUST - * NOT touch any persistent state (hardware or software) or data - * structures except the passed in @state parameter. - * - * Also beware that userspace can request its own custom modes, neither - * core nor helpers filter modes to the list of probe modes reported by - * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure - * that modes are filtered consistently put any bridge constraints and - * limits checks into @mode_valid. - * - * RETURNS: - * - * True if an acceptable configuration is possible, false if the modeset - * operation should be rejected. - */ - bool (*mode_fixup)(struct drm_bridge *bridge, - const struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode); /** * @disable: * @@ -466,9 +426,7 @@ struct drm_bridge_funcs { * &drm_bridge_funcs.atomic_check() hooks are called in reverse * order (from the last to the first bridge). * - * This method is optional. &drm_bridge_funcs.mode_fixup() is not - * called when &drm_bridge_funcs.atomic_check() is implemented, so only - * one of them should be provided. + * This method is optional. * * If drivers need to tweak &drm_bridge_state.input_bus_cfg.flags or * &drm_bridge_state.output_bus_cfg.flags it should happen in @@ -478,6 +436,20 @@ struct drm_bridge_funcs { * &drm_connector.display_info.bus_flags if the bridge is the last * element in the chain. * + * NOTE: + * + * This function is called in the check phase of atomic modesets, which + * can be aborted for any reason (including on userspace's request to + * just check whether a configuration would be possible). Drivers MUST + * NOT touch any persistent state (hardware or software) or data + * structures except the passed in @state parameter. + * + * Also beware that userspace can request its own custom modes, neither + * core nor helpers filter modes to the list of probe modes reported by + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure + * that modes are filtered consistently put any bridge constraints and + * limits checks into @mode_valid. + * * RETURNS: * zero if the check passed, a negative error code otherwise. */
All users are converted over to drm_bridge_funcs.atomic_check() so it is safe to drop the mode_fixup support. Update the comment for atomic_check with relevant parts from mode_fixup. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> --- drivers/gpu/drm/drm_bridge.c | 7 +---- include/drm/drm_bridge.h | 60 ++++++++++-------------------------- 2 files changed, 17 insertions(+), 50 deletions(-)