@@ -39,6 +39,11 @@ static bool cros_ec_lpc_acpi_device_found;
* be used as the base port for EC mapped memory.
*/
#define CROS_EC_LPC_QUIRK_REMAP_MEMORY BIT(0)
+/*
+ * Indicates that lpc_driver_data.quirk_acpi_id should be used to find
+ * the ACPI device.
+ */
+#define CROS_EC_LPC_QUIRK_ACPI_ID BIT(1)
/**
* struct lpc_driver_data - driver data attached to a DMI device ID to indicate
@@ -46,10 +51,12 @@ static bool cros_ec_lpc_acpi_device_found;
* @quirks: a bitfield composed of quirks from CROS_EC_LPC_QUIRK_*
* @quirk_mmio_memory_base: The first I/O port addressing EC mapped memory (used
* when quirk ...REMAP_MEMORY is set.)
+ * @quirk_acpi_id: An ACPI HID to be used to find the ACPI device.
*/
struct lpc_driver_data {
u32 quirks;
u16 quirk_mmio_memory_base;
+ const char *quirk_acpi_id;
};
/**
@@ -418,6 +425,26 @@ static void cros_ec_lpc_acpi_notify(acpi_handle device, u32 value, void *data)
pm_system_wakeup();
}
+static acpi_status cros_ec_lpc_parse_device(acpi_handle handle, u32 level,
+ void *context, void **retval)
+{
+ *(struct acpi_device **)context = acpi_fetch_acpi_dev(handle);
+ return AE_CTRL_TERMINATE;
+}
+
+static struct acpi_device *cros_ec_lpc_get_device(const char *id)
+{
+ struct acpi_device *adev = NULL;
+ acpi_status status = acpi_get_devices(id, cros_ec_lpc_parse_device,
+ &adev, NULL);
+ if (ACPI_FAILURE(status)) {
+ pr_warn(DRV_NAME ": Looking for %s failed\n", id);
+ return NULL;
+ }
+
+ return adev;
+}
+
static int cros_ec_lpc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -445,6 +472,16 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
if (quirks & CROS_EC_LPC_QUIRK_REMAP_MEMORY)
ec_lpc->mmio_memory_base = driver_data->quirk_mmio_memory_base;
+
+ if (quirks & CROS_EC_LPC_QUIRK_ACPI_ID) {
+ adev = cros_ec_lpc_get_device(driver_data->quirk_acpi_id);
+ if (!adev) {
+ dev_err(dev, "failed to get ACPI device '%s'",
+ driver_data->quirk_acpi_id);
+ return -ENODEV;
+ }
+ ACPI_COMPANION_SET(dev, adev);
+ }
}
/*
@@ -709,23 +746,12 @@ static struct platform_device cros_ec_lpc_device = {
.name = DRV_NAME
};
-static acpi_status cros_ec_lpc_parse_device(acpi_handle handle, u32 level,
- void *context, void **retval)
-{
- *(bool *)context = true;
- return AE_CTRL_TERMINATE;
-}
-
static int __init cros_ec_lpc_init(void)
{
int ret;
- acpi_status status;
const struct dmi_system_id *dmi_match;
- status = acpi_get_devices(ACPI_DRV_NAME, cros_ec_lpc_parse_device,
- &cros_ec_lpc_acpi_device_found, NULL);
- if (ACPI_FAILURE(status))
- pr_warn(DRV_NAME ": Looking for %s failed\n", ACPI_DRV_NAME);
+ cros_ec_lpc_acpi_device_found = !!cros_ec_lpc_get_device(ACPI_DRV_NAME);
dmi_match = dmi_first_match(cros_ec_lpc_dmi_table);
Framework Laptops' ACPI exposes the EC with id "PNP0C09". But "PNP0C09" is part of the ACPI standard; there are lots of computers with EC chips with this id, and most of them don't support the cros_ec protocol. The driver could find the ACPI device by having "PNP0C09" in the acpi_match_table, but this would match devices which don't support the cros_ec protocol. Instead, add a new quirk "CROS_EC_LPC_QUIRK_ACPI_ID" which allows the id to be specified. This quirk is applied after the DMI check shows that the device is supported. Signed-off-by: Ben Walsh <ben@jubnut.com> --- drivers/platform/chrome/cros_ec_lpc.c | 50 ++++++++++++++++++++------- 1 file changed, 38 insertions(+), 12 deletions(-)