diff mbox series

[4.4.y-cip,5/5] ARM: dts: iwg23s-sbc: Add QSPI flash support

Message ID 1563259341-37180-6-git-send-email-biju.das@bp.renesas.com (mailing list archive)
State Accepted
Headers show
Series Add QSPI support | expand

Commit Message

Biju Das July 16, 2019, 6:42 a.m. UTC 
commit 91f5c32dd0c8fc662694de4d8c5eeb61e4b4210b upstream.

This commit adds QSPI flash support to the iwg23s board specific
device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 4ceff9c..48b168d 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -54,12 +54,38 @@ 
 		function = "avb";
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data2";
+		function = "qspi0";
+	};
+
 	scif1_pins: scif1 {
 		groups = "scif1_data_b";
 		function = "scif1";
 	};
 };
 
+&qspi0 {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WARNING - This device contains the bootloader. Handle with care. */
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "issi,is25lp016d", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
 &scif1 {
 	pinctrl-0 = <&scif1_pins>;
 	pinctrl-names = "default";