diff mbox series

[4.4.y-cip,v2,12/15] devicetree: bindings: Add optional dynamic-power-coefficient property

Message ID 20200608093028.21612-13-wens@csie.org (mailing list archive)
State Changes Requested
Headers show
Series PM / OPP v2 & cpufreq backports part 1 | expand

Commit Message

Chen-Yu Tsai June 8, 2020, 9:30 a.m. UTC
From: Punit Agrawal <punit.agrawal@arm.com>

commit 3be3f8f36e7349006f19c8c8f0d686e98462a993 upstream.

The dynamic power consumption of a device is proportional to the
square of voltage (V) and the clock frequency (f). It can be expressed as

Pdyn = dynamic-power-coefficient * V^2 * f.

The coefficient represents the running time dynamic power consumption in
units of mw/MHz/uVolt^2 and can be used in the above formula to
calculate the dynamic power in mW.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
 Documentation/devicetree/bindings/arm/cpus.txt | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series


diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 9ef9a2089a5e7..6b1d8ebb94b7b 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -243,6 +243,23 @@  nodes to be present and contain the properties described below.
 		Definition: Specifies the syscon node controlling the cpu core
 			    power domains.
+	- dynamic-power-coefficient
+		Usage: optional
+		Value type: <prop-encoded-array>
+		Definition: A u32 value that represents the running time dynamic
+			    power coefficient in units of mW/MHz/uVolt^2. The
+			    coefficient can either be calculated from power
+			    measurements or derived by analysis.
+			    The dynamic power consumption of the CPU  is
+			    proportional to the square of the Voltage (V) and
+			    the clock frequency (f). The coefficient is used to
+			    calculate the dynamic power as below -
+			    Pdyn = dynamic-power-coefficient * V^2 * f
+			    where voltage is in uV, frequency is in MHz.
 Example 1 (dual-cluster big.LITTLE system 32-bit):
 	cpus {