[4.19.y-cip,1/7] dt-bindings: memory: document Renesas RPC-IF bindings

Commit Message

Lad Prabhakar Nov. 23, 2020, 12:03 p.m. UTC

From: Sergei Shtylyov <[e-mail]>

commit ab1c362061d92556bd96fd2c0b188f8e4223e3e3 upstream.

Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
HyperFlash connected to the SoC to be accessed via the external address
space read mode or the manual mode.

Document the device tree bindings for the Renesas RPC-IF found in the R-Car
gen3 SoCs.

Based on the original patch by Mason Yang <[e-mail]>.

Signed-off-by: Sergei Shtylyov <[e-mail]>
Link: https://lore.kernel.org/r/[e-mail]
Signed-off-by: Mark Brown <[e-mail]>
Signed-off-by: Lad Prabhakar <[e-mail]>
---
 .../memory-controllers/renesas,rpc-if.yaml    | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml

Patch

diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
new file mode 100644
index 000000000000..660005601a7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -0,0 +1,88 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+  - Sergei Shtylyov <[e-mail]>
+
+description: |
+  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+  be accessed via the external address space read mode or the manual mode.
+
+  The flash chip itself should be represented by a subnode of the RPC-IF node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  - if it contains "jedec,spi-nor", then SPI is used;
+  - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,r8a77970-rpc-if       # R-Car V3M
+        - renesas,r8a77980-rpc-if       # R-Car V3H
+        - renesas,r8a77995-rpc-if       # R-Car D3
+      - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+
+  reg:
+    items:
+      - description: RPC-IF registers
+      - description: direct mapping read mode area
+      - description: write buffer area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+      - const: wbuf
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "flash@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - cfi-flash
+          - jedec,spi-nor
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77995-sysc.h>
+
+    spi@ee200000 {
+      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+      reg = <0xee200000 0x200>,
+            <0x08000000 0x4000000>,
+            <0xee208000 0x100>;
+      reg-names = "regs", "dirmap", "wbuf";
+      clocks = <&cpg CPG_MOD 917>;
+      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+      resets = <&cpg 917>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-max-frequency = <40000000>;
+        spi-tx-bus-width = <1>;
+        spi-rx-bus-width = <1>;
+      };
+    };