From patchwork Wed Mar 30 18:54:53 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lad Prabhakar X-Patchwork-Id: 12796261 X-Patchwork-Delegate: pavel@denx.de Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id B35DCC433FE for ; Wed, 30 Mar 2022 18:55:47 +0000 (UTC) Received: from relmlie6.idc.renesas.com (relmlie6.idc.renesas.com [210.160.252.172]) by mx.groups.io with SMTP id smtpd.web10.2188.1648666538384202756 for ; Wed, 30 Mar 2022 11:55:47 -0700 Authentication-Results: mx.groups.io; dkim=missing; spf=pass (domain: bp.renesas.com, ip: 210.160.252.172, mailfrom: prabhakar.mahadev-lad.rj@bp.renesas.com) X-IronPort-AV: E=Sophos;i="5.90,223,1643641200"; d="scan'208";a="116211158" Received: from unknown (HELO relmlir6.idc.renesas.com) ([10.200.68.152]) by relmlie6.idc.renesas.com with ESMTP; 31 Mar 2022 03:55:46 +0900 Received: from localhost.localdomain (unknown [10.226.36.204]) by relmlir6.idc.renesas.com (Postfix) with ESMTP id CBF2040D4D0B; Thu, 31 Mar 2022 03:55:45 +0900 (JST) From: Lad Prabhakar To: cip-dev@lists.cip-project.org, Nobuhiro Iwamatsu , Pavel Machek Cc: Biju Das Subject: [PATCH 5.10.y-cip 38/39] arm64: dts: renesas: rzg2l-smarc-som: Enable eMMC on SMARC platform Date: Wed, 30 Mar 2022 19:54:53 +0100 Message-Id: <20220330185454.10887-39-prabhakar.mahadev-lad.rj@bp.renesas.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20220330185454.10887-1-prabhakar.mahadev-lad.rj@bp.renesas.com> References: <20220330185454.10887-1-prabhakar.mahadev-lad.rj@bp.renesas.com> List-Id: X-Webhook-Received: from li982-79.members.linode.com [45.33.32.79] by aws-us-west-2-korg-lkml-1.web.codeaurora.org with HTTPS for ; Wed, 30 Mar 2022 18:55:47 -0000 X-Groupsio-URL: https://lists.cip-project.org/g/cip-dev/message/7889 From: Biju Das commit a60a311cb8d0cddaaeb1eee22bfd76138e6b5ad6 upstream. RZ/G2L SoM has both 64 GB eMMC and microSD connected to SDHI0. Both these interfaces are mutually exclusive and the SD0 device selection is based on the XOR between GPIO_SD0_DEV_SEL and SW1[2] switch position. This patch sets GPIO_SD0_DEV_SEL to high in DT. Use the below switch setting logic for device selection between eMMC and microSD slot connected to SDHI0. Set SW1[2] to position 2/OFF for selecting eMMC Set SW1[2] to position 3/ON for selecting microSD This patch enables eMMC on RZ/G2L SMARC platform by default. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20211010142520.21976-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven [PL: Manually applied the changes] Signed-off-by: Lad Prabhakar --- .../boot/dts/renesas/rzg2l-smarc-som.dtsi | 143 ++++++++++++++++++ 1 file changed, 143 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 9804ca0fd528..c496c3bf212b 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -5,8 +5,19 @@ * Copyright (C) 2021 Renesas Electronics Corp. */ +#include #include +/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ +#define EMMC 1 + +/* + * To enable uSD card on CN3, + * SW1[2] should be at position 3/ON. + * Disable eMMC by setting "#define EMMC 0" above. + */ +#define SDHI (!EMMC) + / { aliases { ethernet0 = ð0; @@ -22,6 +33,36 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x78000000>; }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; }; &adc { @@ -130,6 +171,13 @@ ; /* ET1_RXD3 */ }; + gpio-sd0-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "gpio_sd0_pwr_en"; + }; + qspi0_pins: qspi0 { qspi0-data { pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; @@ -141,6 +189,70 @@ power-source = <1800>; }; }; + + /* + * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] + * The below switch logic can be used to select the device between + * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. + * SW1[2] should be at position 2/OFF to enable 64 GB eMMC + * SW1[2] should be at position 3/ON to enable uSD card CN3 + */ + sd0-dev-sel-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd0_dev_sel"; + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = ; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = ; /* SD0_CD */ + }; + }; }; &sbc { @@ -170,3 +282,34 @@ }; }; }; + +#if SDHI +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +#if EMMC +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#endif