deleted file mode 100644
@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9093 consists of a large and varied group of sub-devices (I2C Only):
-
-Device Supply Names Description
------- ------------ -----------
-da9063-regulator : : LDOs & BUCKs
-da9063-onkey : : On Key
-da9063-rtc : : Real-Time Clock (DA9063 only)
-da9063-watchdog : : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
- modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
- The DA9063(L) regulators are bound using their names listed below:
-
- bcore1 : BUCK CORE1
- bcore2 : BUCK CORE2
- bpro : BUCK PRO
- bmem : BUCK MEM
- bio : BUCK IO
- bperi : BUCK PERI
- ldo1 : LDO_1 (DA9063 only)
- ldo2 : LDO_2 (DA9063 only)
- ldo3 : LDO_3
- ldo4 : LDO_4 (DA9063 only)
- ldo5 : LDO_5 (DA9063 only)
- ldo6 : LDO_6 (DA9063 only)
- ldo7 : LDO_7
- ldo8 : LDO_8
- ldo9 : LDO_9
- ldo10 : LDO_10 (DA9063 only)
- ldo11 : LDO_11
-
- The component follows the standard regulator framework and the bindings
- details of individual regulator device can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
- the DA9063 only. The RTC is not present in DA9063L. There are currently
- no entries in this binding, however compatible = "dlg,da9063-rtc" should
- be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
- functionality of the device. The node should contain the compatible property
- with the value "dlg,da9063-onkey".
-
- Optional onkey properties:
-
- - dlg,disable-key-power : Disable power-down using a long key-press. If this
- entry exists the OnKey driver will remove support for the KEY_POWER key
- press. If this entry does not exist then by default the key-press
- triggered power down is enabled and the OnKey will support both KEY_POWER
- and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
- with the DA9063 and DA9063L. There are currently no entries in this
- binding, however compatible = "dlg,da9063-watchdog" should be added
- if a node is created.
-
-
-Example:
-
- pmic0: da9063@58 {
- compatible = "dlg,da9063"
- reg = <0x58>;
- interrupt-parent = <&gpio6>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
-
- onkey {
- compatible = "dlg,da9063-onkey";
- dlg,disable-key-power;
- };
-
- regulators {
- DA9063_BCORE1: bcore1 {
- regulator-name = "BCORE1";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <500000>;
- regulator-max-microamp = <2000000>;
- regulator-boot-on;
- };
- DA9063_LDO11: ldo11 {
- regulator-name = "LDO_11";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <3600000>;
- regulator-boot-on;
- };
- };
- };
-
new file mode 100644
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Steve Twiss <stwiss.opensource@diasemi.com>
+
+description: |
+ For device-tree bindings of other sub-modules refer to the binding documents
+ under the respective sub-system directories.
+
+properties:
+ compatible:
+ enum:
+ - dlg,da9063
+ - dlg,da9063l
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ dlg,use-sw-pm:
+ type: boolean
+ description:
+ Disable the watchdog during suspend.
+ Only use this option if you can't use the watchdog automatic suspend
+ function during a suspend (see register CONTROL_B).
+
+ watchdog:
+ type: object
+ $ref: /schemas/watchdog/watchdog.yaml#
+ unevaluatedProperties: false
+ properties:
+ compatible:
+ const: dlg,da9063-watchdog
+
+ rtc:
+ type: object
+ $ref: /schemas/rtc/rtc.yaml#
+ unevaluatedProperties: false
+ properties:
+ compatible:
+ const: dlg,da9063-rtc
+
+ onkey:
+ type: object
+ $ref: /schemas/input/input.yaml#
+ unevaluatedProperties: false
+ properties:
+ compatible:
+ const: dlg,da9063-onkey
+
+ dlg,disable-key-power:
+ type: boolean
+ description: |
+ Disable power-down using a long key-press.
+ If this entry does not exist then by default the key-press triggered
+ power down is enabled and the OnKey will support both KEY_POWER and
+ KEY_SLEEP.
+
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
+ $ref: /schemas/regulator/regulator.yaml
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ watchdog {
+ compatible = "dlg,da9063-watchdog";
+ };
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ dlg,disable-key-power;
+ };
+
+ regulators {
+ regulator-bcore1 {
+ regulator-name = "BCORE1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <2000000>;
+ regulator-boot-on;
+ };
+ regulator-ldo11 {
+ regulator-name = "LDO_11";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+...
@@ -68,8 +68,6 @@ properties:
- devantech,srf10
# DA9053: flexible system level PMIC with multicore support
- dlg,da9053
- # DA9063: system PMIC for quad-core application processors
- - dlg,da9063
# DMARD09: 3-axis Accelerometer
- domintech,dmard09
# DMARD10: 3-axis Accelerometer
@@ -5123,6 +5123,7 @@ S: Supported
W: http://www.dialog-semiconductor.com/products
F: Documentation/devicetree/bindings/input/da90??-onkey.txt
F: Documentation/devicetree/bindings/mfd/da90*.txt
+F: Documentation/devicetree/bindings/mfd/da90*.yaml
F: Documentation/devicetree/bindings/regulator/da92*.txt
F: Documentation/devicetree/bindings/regulator/slg51000.txt
F: Documentation/devicetree/bindings/sound/da[79]*.txt