diff mbox series

[6.1.y-cip,24/85] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties

Message ID 20250312112302.1605750-25-tommaso.merciai.xr@bp.renesas.com (mailing list archive)
State New
Headers show
Series soc: renesas: Add RZ/G3E support | expand

Commit Message

Tommaso Merciai March 12, 2025, 11:22 a.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

commit a76932e45e9b56ac24ee947294fbb52c3713f839 upstream.

On the RZ/G3S SMARC platform, the 'input' property is utilized in
gpio-hog nodes, and the 'output-enable' property is used for ETH0/1 TXC
pins.  Update the binding documentation to include these properties,
addressing the following dtbs_check warnings:

    arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: key-1-gpio-hog: 'anyOf' conditional failed, one must be fixed:
	    'input' does not match any of the regexes: 'pinctrl-[0-9]+'

    arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: pinctrl@11030000: eth0: 'anyOf' conditional failed, one must be fixed:
	    'output-enable' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240313083828.5048-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml      | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index b8937e01be92..845225d58cd0 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -120,7 +120,9 @@  additionalProperties:
         slew-rate: true
         gpio-hog: true
         gpios: true
+        input: true
         input-enable: true
+        output-enable: true
         output-high: true
         output-low: true
         line-name: true