From patchwork Thu Oct 12 18:53:30 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dave Jiang X-Patchwork-Id: 13419624 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F1C382AB39 for ; Thu, 12 Oct 2023 18:53:48 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="J2fgnfaq" Received: from mgamail.intel.com (mgamail.intel.com [134.134.136.24]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C2236BE for ; Thu, 12 Oct 2023 11:53:46 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1697136826; x=1728672826; h=subject:from:to:cc:date:message-id:mime-version: content-transfer-encoding; bh=E+24JKXmFdhmKf5wyharDRQcTFK8f40ngbL7CyDxeqQ=; b=J2fgnfaqfGHdZmbQ4ab5PiCogakKLofkyd/Wls4R7vMG2BIaZLq1JNis pmH4HSg0j1bUbLnrko8FgkRrFfokzzhc6wcUcjVRnDuRrZLaQAIj8GMNI Ok9rbShHGRyRa1Gxs4rZ7vTUqYbKGuna9LJFofFMFDdTgee+4U6jXV2iC fLhnHIW5alj9I4Nui1OSOWd7FNawae2yaKd4Rj9cUwLVyhFTTFv3v+Rtu GMKDC6vZeu8ebd8ms3gM63PVSxwNmQ+1uU4lOxrSudMFAO8aE14+aIgm3 IIRJokpTh1jmAdMsv62IBTOtu+XRPr1cChDka3PTd92KOyQWVTeY07Jpl g==; X-IronPort-AV: E=McAfee;i="6600,9927,10861"; a="387864856" X-IronPort-AV: E=Sophos;i="6.03,219,1694761200"; d="scan'208";a="387864856" Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by orsmga102.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 12 Oct 2023 11:53:32 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=McAfee;i="6600,9927,10861"; a="898245559" X-IronPort-AV: E=Sophos;i="6.03,219,1694761200"; d="scan'208";a="898245559" Received: from djiang5-mobl3.amr.corp.intel.com (HELO [192.168.1.177]) ([10.212.15.16]) by fmsmga001-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 12 Oct 2023 11:51:42 -0700 Subject: [PATCH v11 00/22] cxl: Add support for QTG ID retrieval for CXL subsystem From: Dave Jiang To: linux-cxl@vger.kernel.org Cc: Len Brown , Dan Williams , Jonathan Cameron , Davidlohr Bueso , Ira Weiny , Jonathan Cameron , "Rafael J. Wysocki" , "Rafael J. Wysocki" , Greg Kroah-Hartman , Hanjun Guo , dan.j.williams@intel.com, ira.weiny@intel.com, vishal.l.verma@intel.com, alison.schofield@intel.com, Jonathan.Cameron@huawei.com, dave@stgolabs.net Date: Thu, 12 Oct 2023 11:53:30 -0700 Message-ID: <169713674328.2205276.10184241477215488339.stgit@djiang5-mobl3> User-Agent: StGit/1.5 Precedence: bulk X-Mailing-List: linux-cxl@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF, RCVD_IN_DNSWL_BLOCKED,RCVD_IN_MSPIKE_H3,RCVD_IN_MSPIKE_WL, SPF_HELO_NONE,SPF_NONE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net cxl: Add support for QTG ID retrieval for CXL subsystem v11: - Add debug print for multiple DSMAS entries for a partition. (Jonathan) - Change qos_class0 to qos_class. (Dan) - Add verification of endpoint device's host bridge to root decoder targets. (Dan) - See individual patches for additional changes. v10: - Remove memory allocation in DSM handler. Add input parameters to request number of ids to return. (Dan) - Only export a single qos_class sysfs attribute, qos_class0 for devices. (Dan) - Add sanity check of device qos_class against root decoders (Dan) - Recombine all relevant patches for cxl upstream merge - Rebased against v6.6-rc4 v9: - Correct DSM input package to use integers. (Dan) - Remove all endien conversions. (Dan) v8: - Correct DSM return package parsing to use integers v7: - Minor changes. Please see specific patches for log entries addressing comments from v6. v6: - Please see specific patches for log entries addressing comments from v5. - Use CDAT sub-table structs as is, adjust w/o common header. Changing causes significant ACPICA code changes. - Deal with table header now that is a union. (Jonathan) - Move DSMAS list destroy to core/cdat.c. (Jonathan) - Retain and display entire QTG ID list from _DSM. (Jonathan) v5: - Please see specific patches for log entries addressing comments from v4. - Split out ACPI and generic node code to send separately to respective maintainers - Reworked to use ACPI tables code for CDAT parsing (Dan) - Cache relevant perf data under dports (Dan) - Add cxl root callback for QTG ID _DSM (Dan) - Rename 'node_hmem_attr' to 'access_coordinate' (Dan) - Change qtg_id sysfs attrib to qos_class (Dan) v4: - Reworked PCIe link path latency calculation - 0-day fixes - Removed unused qos_list from cxl_memdev and its stray usages v3: - Please see specific patches for log entries addressing comments from v2. - Refactor cxl_port_probe() additions. (Alison) - Convert to use 'struct node_hmem_attrs' - Refactor to use common code for genport target allocation. - Add third array entry for target hmem_attrs to store genport locality data. - Go back to per partition QTG ID. (Dan) v2: - Please see specific patches for log entries addressing comments from v1. - Removed ACPICA code usages. - Removed PCI subsystem helpers for latency and bandwidth. - Add CXL switch CDAT parsing support (SSLBIS) - Add generic port SRAT+HMAT support (ACPI) - Export a single QTG ID via sysfs per memory device (Dan) - Provide rest of DSMAS range info in debugfs (Dan) Hi Dan, Please consider taking the entire series including the CXL bits for the next convenient merge window. Thanks! This series adds the retrieval of QoS Throttling Group (QTG) IDs for the CXL Fixed Memory Window Structure (CFMWS) and the CXL memory device. It provides the QTG IDs to user space to provide some guidance with putting the proper DPA range under the appropriate CFMWS window for a hot-plugged CXL memory device. The CFMWS structure contains a QTG ID that is associated with the memory window that the structure exports. On Linux, the CFMWS is represented as a CXL root decoder. The QTG ID will be attached to the CXL root decoder and exported as a sysfs attribute (qos_class). The QTG IDs for a device is retrieved via sending a _DSM method to the ACPI0017 device. The _DSM expects an input package of 4 DWORDS that contains the read latency, write latency, read bandwidth, and write banwidth. These are the caluclated numbers for the path between the CXL device and the CPU. The list of QTG IDs are also exported as a sysfs attribute under the mem device memory partition type: /sys/bus/cxl/devices/memX/ram/qos_class /sys/bus/cxl/devices/memX/pmem/qos_class A mapping of DPA ranges and it's correlated QTG IDs are found under /sys/kernel/debug/cxl/memX/qtgmap. Each DSMAS from the device CDAT will provide a DPA range. The latency numbers are the aggregated latencies for the path between the CXL device and the CPU. If a CXL device is directly attached to the CXL HB, the latency would be the aggregated latencies from the device Coherent Device Attribute Table (CDAT), the caluclated PCIe link latency between the device and the HB, and the generic port data from ACPI SRAT+HMAT. The bandwidth in this configuration would be the minimum between the CDAT bandwidth number, link bandwidth between the device and the HB, and the bandwidth data from the generic port data via ACPI SRAT+HMAT. If a configuration has a switch in between then the latency would be the aggregated latencies from the device CDAT, the link latency between device and switch, the latency from the switch CDAT, the link latency between switch and the HB, and the generic port latency between the CPU and the CXL HB. The bandwidth calculation would be the min of device CDAT bandwidth, link bandwith between device and switch, switch CDAT bandwidth, the link bandwidth between switch and HB, and the generic port bandwidth There can be 0 or more switches between the CXL device and the CXL HB. There are detailed examples on calculating bandwidth and latency in the CXL Memory Device Software Guide [4]. The CDAT provides Device Scoped Memory Affinity Structures (DSMAS) that contains the Device Physical Address (DPA) range and the related Device Scoped Latency and Bandwidth Informat Stuctures (DSLBIS). Each DSLBIS provides a latency or bandwidth entry that is tied to a DSMAS entry via a per DSMAS unique DSMAD handle. Test setup is done with runqemu genport support branch [6]. The setup provides 2 CXL HBs with one HB having a CXL switch underneath. It also provides generic port support detailed below. A hacked up qemu branch is used to support generic port SRAT and HMAT [7]. To create the appropriate HMAT entries for generic port, the following qemu paramters must be added: -object genport,id=$X -numa node,genport=genport$X,nodeid=$Y,initiator=$Z -numa hmat-lb,initiator=$Z,target=$X,hierarchy=memory,data-type=access-latency,latency=$latency -numa hmat-lb,initiator=$Z,target=$X,hierarchy=memory,data-type=access-bandwidth,bandwidth=$bandwidthM for ((i = 0; i < total_nodes; i++)); do for ((j = 0; j < cxl_hbs; j++ )); do # 2 CXL HBs -numa dist,src=$i,dst=$X,val=$dist done done See the genport run_qemu branch for full details. [1]: https://www.computeexpresslink.org/download-the-specification [2]: https://uefi.org/sites/default/files/resources/Coherent%20Device%20Attribute%20Table_1.01.pdf [3]: https://uefi.org/sites/default/files/resources/ACPI_Spec_6_5_Aug29.pdf [4]: https://cdrdv2-public.intel.com/643805/643805_CXL%20Memory%20Device%20SW%20Guide_Rev1p0.pdf [5]: https://lore.kernel.org/linux-cxl/20230313195530.GA1532686@bhelgaas/T/#t [6]: https://git.kernel.org/pub/scm/linux/kernel/git/djiang/linux.git/log/?h=cxl-qtg [7]: https://github.com/pmem/run_qemu/tree/djiang/genport [8]: https://github.com/davejiang/qemu/tree/genport base-commit: 178e1ea6a68f12967ee0e9afc4d79a2939acd43c --- Dave Jiang (22): cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute cxl: Add checksum verification to CDAT from CXL cxl: Add support for reading CXL switch CDAT table acpi: Move common tables helper functions to common lib lib/firmware_table: tables: Add CDAT table parsing support base/node / acpi: Change 'node_hmem_attrs' to 'access_coordinates' acpi: numa: Create enum for memory_target access coordinates indexing acpi: numa: Add genport target allocation to the HMAT parsing acpi: Break out nesting for hmat_parse_locality() acpi: numa: Add setting of generic port system locality attributes acpi: numa: Add helper function to retrieve the performance attributes cxl: Add callback to parse the DSMAS subtables from CDAT cxl: Add callback to parse the DSLBIS subtable from CDAT cxl: Add callback to parse the SSLBIS subtable from CDAT cxl: Add support for _DSM Function for retrieving QTG ID cxl: Calculate and store PCI link latency for the downstream ports cxl: Store the access coordinates for the generic ports cxl: Add helper function that calculate performance data for downstream ports cxl: Compute the entire CXL path latency and bandwidth data cxl: Store QTG IDs and related info to the CXL memory device context cxl: Export sysfs attributes for memory device QoS class cxl: Check qos_class validity on memdev probe Documentation/ABI/testing/sysfs-bus-cxl | 49 +++++ MAINTAINERS | 2 + drivers/acpi/Kconfig | 1 + drivers/acpi/numa/hmat.c | 172 +++++++++++++--- drivers/acpi/tables.c | 178 +---------------- drivers/base/node.c | 12 +- drivers/cxl/Kconfig | 1 + drivers/cxl/acpi.c | 152 ++++++++++++++- drivers/cxl/core/Makefile | 1 + drivers/cxl/core/cdat.c | 249 ++++++++++++++++++++++++ drivers/cxl/core/mbox.c | 1 + drivers/cxl/core/memdev.c | 34 ++++ drivers/cxl/core/pci.c | 125 ++++++++++-- drivers/cxl/core/port.c | 124 +++++++++++- drivers/cxl/cxl.h | 74 +++++++ drivers/cxl/cxlmem.h | 23 +++ drivers/cxl/cxlpci.h | 15 ++ drivers/cxl/mem.c | 121 ++++++++++++ drivers/cxl/port.c | 123 +++++++++++- include/linux/acpi.h | 54 +++-- include/linux/fw_table.h | 52 +++++ include/linux/node.h | 8 +- lib/Kconfig | 3 + lib/Makefile | 2 + lib/fw_table.c | 237 ++++++++++++++++++++++ 25 files changed, 1545 insertions(+), 268 deletions(-) create mode 100644 drivers/cxl/core/cdat.c create mode 100644 include/linux/fw_table.h create mode 100644 lib/fw_table.c --