diff mbox series

[v4,2/2] cxl: Move cxl_await_media_ready() to before capacity info retrieval

Message ID 168445102304.3241714.10279441298179336657.stgit@djiang5-mobl3
State New, archived
Headers show
Series None | expand

Commit Message

Dave Jiang May 18, 2023, 11:03 p.m. UTC
Move cxl_await_media_ready() to cxl_pci probe before driver starts issuing
IDENTIFY and retrieving memory device information to ensure that the
device is ready to provide the information. Allow pci_probe() to succeed
even if media is not ready. Cache the media failure in cxlds and don't ask
the device for any media information.

Suggested-by: Dan Williams <dan.j.williams@intel.com>
Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>

---
v4:
- Fail mem_probe() if media not ready. (Dan)
v3:
- Allow pci_probe() to succeed even when media is not ready. (Dan)
- Cache media failure and skip any operation probing the media. (Dan)
---
 drivers/cxl/core/mbox.c |   15 ++++++++++-----
 drivers/cxl/cxlmem.h    |    2 ++
 drivers/cxl/mem.c       |    3 +++
 drivers/cxl/pci.c       |    6 ++++++
 drivers/cxl/port.c      |    6 ------
 5 files changed, 21 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index f2addb457172..114e15d02bde 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -984,7 +984,7 @@  static int cxl_mem_get_partition_info(struct cxl_dev_state *cxlds)
  * cxl_dev_state_identify() - Send the IDENTIFY command to the device.
  * @cxlds: The device data for the operation
  *
- * Return: 0 if identify was executed successfully.
+ * Return: 0 if identify was executed successfully or media not ready.
  *
  * This will dispatch the identify command to the device and on success populate
  * structures to be exported to sysfs.
@@ -996,6 +996,9 @@  int cxl_dev_state_identify(struct cxl_dev_state *cxlds)
 	struct cxl_mbox_cmd mbox_cmd;
 	int rc;
 
+	if (!cxlds->media_ready)
+		return 0;
+
 	mbox_cmd = (struct cxl_mbox_cmd) {
 		.opcode = CXL_MBOX_OP_IDENTIFY,
 		.size_out = sizeof(id),
@@ -1065,10 +1068,12 @@  int cxl_mem_create_range_info(struct cxl_dev_state *cxlds)
 				   cxlds->persistent_only_bytes, "pmem");
 	}
 
-	rc = cxl_mem_get_partition_info(cxlds);
-	if (rc) {
-		dev_err(dev, "Failed to query partition information\n");
-		return rc;
+	if (cxlds->media_ready) {
+		rc = cxl_mem_get_partition_info(cxlds);
+		if (rc) {
+			dev_err(dev, "Failed to query partition information\n");
+			return rc;
+		}
 	}
 
 	rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0,
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 001dabf0231b..b24796862e13 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -227,6 +227,7 @@  struct cxl_event_state {
  * @regs: Parsed register blocks
  * @cxl_dvsec: Offset to the PCIe device DVSEC
  * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH)
+ * @media_ready: Indicate whether the device media is usable
  * @payload_size: Size of space for payload
  *                (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register)
  * @lsa_size: Size of Label Storage Area
@@ -263,6 +264,7 @@  struct cxl_dev_state {
 	int cxl_dvsec;
 
 	bool rcd;
+	bool media_ready;
 	size_t payload_size;
 	size_t lsa_size;
 	struct mutex mbox_mutex; /* Protects device mailbox and firmware */
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 39c4b54f0715..71d7eafb6c94 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -104,6 +104,9 @@  static int cxl_mem_probe(struct device *dev)
 	struct dentry *dentry;
 	int rc;
 
+	if (!cxlds->media_ready)
+		return -EBUSY;
+
 	/*
 	 * Someone is trying to reattach this device after it lost its port
 	 * connection (an endpoint port previously registered by this memdev was
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index ea38bd49b0cf..8e761c122966 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -708,6 +708,12 @@  static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		dev_dbg(&pdev->dev, "Failed to map RAS capability.\n");
 
+	rc = cxl_await_media_ready(cxlds);
+	if (rc == 0)
+		cxlds->media_ready = true;
+	else
+		dev_warn(&pdev->dev, "Media not active (%d)\n", rc);
+
 	rc = cxl_pci_setup_mailbox(cxlds);
 	if (rc)
 		return rc;
diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
index a49f5eb149f1..bfb948e00c42 100644
--- a/drivers/cxl/port.c
+++ b/drivers/cxl/port.c
@@ -108,12 +108,6 @@  static int cxl_endpoint_port_probe(struct cxl_port *port)
 	if (rc)
 		return rc;
 
-	rc = cxl_await_media_ready(cxlds);
-	if (rc) {
-		dev_err(&port->dev, "Media not active (%d)\n", rc);
-		return rc;
-	}
-
 	rc = devm_cxl_enumerate_decoders(cxlhdm, &info);
 	if (rc)
 		return rc;