new file mode 100644
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+cxl-read-labels(1)
+==================
+
+NAME
+----
+cxl-read-labels - read out the label area on a CXL memdev
+
+SYNOPSIS
+--------
+[verse]
+'cxl read-labels' <mem0> [<mem1>..<memN>] [<options>]
+
+include::labels-description.txt[]
+This command dumps the raw binary data in a memdev's label area to stdout or a
+file. In the multi-memdev case the data is concatenated.
+
+OPTIONS
+-------
+include::labels-options.txt[]
+
+-o::
+--output::
+ output file
+
+include::../copyright.txt[]
+
+SEE ALSO
+--------
+linkcxl:cxl-write-labels[1],
+linkcxl:cxl-zero-labels[1],
+CXL-2.0 9.13.2
new file mode 100644
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+
+cxl-write-labels(1)
+===================
+
+NAME
+----
+cxl-write-labels - write data to the label area on a memdev
+
+SYNOPSIS
+--------
+[verse]
+'cxl write-labels <mem> [-i <filename>]'
+
+include::labels-description.txt[]
+Read data from the input filename, or stdin, and write it to the given
+<mem> device. Note that the device must not be active in any region, or
+actively registered with the nvdimm subsystem. If it is, the kernel will
+not allow write access to the device's label data area.
+
+OPTIONS
+-------
+include::labels-options.txt[]
+-i::
+--input::
+ input file
+
+SEE ALSO
+--------
+linkcxl:cxl-read-labels[1],
+linkcxl:cxl-zero-labels[1],
+CXL-2.0 9.13.2
new file mode 100644
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+
+cxl-zero-labels(1)
+==================
+
+NAME
+----
+cxl-zero-labels - zero out the label area on a set of memdevs
+
+SYNOPSIS
+--------
+[verse]
+'cxl zero-labels' <mem0> [<mem1>..<memN>] [<options>]
+
+include::labels-description.txt[]
+This command resets the device to its default state by
+deleting all labels.
+
+OPTIONS
+-------
+include::labels-options.txt[]
+
+include::../copyright.txt[]
+
+SEE ALSO
+--------
+linkcxl:cxl-read-labels[1],
+linkcxl:cxl-write-labels[1],
+CXL-2.0 9.13.2
new file mode 100644
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+
+DESCRIPTION
+-----------
+The region label area is a small persistent partition of capacity
+available on some CXL memory devices. The label area is used to
+and configure or determine the set of memory devices participating
+in different interleave sets.
new file mode 100644
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+
+<memory device(s)>::
+include::memdev-option.txt[]
+
+-s::
+--size=::
+ Limit the operation to the given number of bytes. A size of 0
+ indicates to operate over the entire label capacity.
+
+-O::
+--offset=::
+ Begin the operation at the given offset into the label area.
+
+-v::
+ Turn on verbose debug messages in the library (if libcxl was built with
+ logging and debug enabled).
new file mode 100644
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+A 'memX' device name, or a memdev id number. Restrict the operation to
+the specified memdev(s). The keyword 'all' can be specified to indicate
+the lack of any restriction.
@@ -5,4 +5,9 @@
struct cxl_ctx;
int cmd_list(int argc, const char **argv, struct cxl_ctx *ctx);
+int cmd_write_labels(int argc, const char **argv, struct cxl_ctx *ctx);
+int cmd_read_labels(int argc, const char **argv, struct cxl_ctx *ctx);
+int cmd_zero_labels(int argc, const char **argv, struct cxl_ctx *ctx);
+int cmd_init_labels(int argc, const char **argv, struct cxl_ctx *ctx);
+int cmd_check_labels(int argc, const char **argv, struct cxl_ctx *ctx);
#endif /* _CXL_BUILTIN_H_ */
@@ -61,6 +61,9 @@ static struct cmd_struct commands[] = {
{ "version", .c_fn = cmd_version },
{ "list", .c_fn = cmd_list },
{ "help", .c_fn = cmd_help },
+ { "zero-labels", .c_fn = cmd_zero_labels },
+ { "read-labels", .c_fn = cmd_read_labels },
+ { "write-labels", .c_fn = cmd_write_labels },
};
int main(int argc, const char **argv)
new file mode 100644
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2020-2021 Intel Corporation. All rights reserved. */
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <limits.h>
+#include <util/log.h>
+#include <util/filter.h>
+#include <cxl/libcxl.h>
+#include <util/parse-options.h>
+#include <ccan/minmax/minmax.h>
+#include <ccan/array_size/array_size.h>
+
+struct action_context {
+ FILE *f_out;
+ FILE *f_in;
+};
+
+static struct parameters {
+ const char *outfile;
+ const char *infile;
+ unsigned len;
+ unsigned offset;
+ bool verbose;
+} param;
+
+#define fail(fmt, ...) \
+do { \
+ fprintf(stderr, "cxl-%s:%s:%d: " fmt, \
+ VERSION, __func__, __LINE__, ##__VA_ARGS__); \
+} while (0)
+
+#define BASE_OPTIONS() \
+OPT_BOOLEAN('v',"verbose", ¶m.verbose, "turn on debug")
+
+#define READ_OPTIONS() \
+OPT_STRING('o', "output", ¶m.outfile, "output-file", \
+ "filename to write label area contents")
+
+#define WRITE_OPTIONS() \
+OPT_STRING('i', "input", ¶m.infile, "input-file", \
+ "filename to read label area data")
+
+#define LABEL_OPTIONS() \
+OPT_UINTEGER('s', "size", ¶m.len, "number of label bytes to operate"), \
+OPT_UINTEGER('O', "offset", ¶m.offset, \
+ "offset into the label area to start operation")
+
+static const struct option read_options[] = {
+ BASE_OPTIONS(),
+ LABEL_OPTIONS(),
+ READ_OPTIONS(),
+ OPT_END(),
+};
+
+static const struct option write_options[] = {
+ BASE_OPTIONS(),
+ LABEL_OPTIONS(),
+ WRITE_OPTIONS(),
+ OPT_END(),
+};
+
+static const struct option zero_options[] = {
+ BASE_OPTIONS(),
+ LABEL_OPTIONS(),
+ OPT_END(),
+};
+
+static int action_zero(struct cxl_memdev *memdev, struct action_context *actx)
+{
+ size_t size;
+ int rc;
+
+ if (param.len)
+ size = param.len;
+ else
+ size = cxl_memdev_get_label_size(memdev);
+
+ if (cxl_memdev_nvdimm_bridge_active(memdev)) {
+ fprintf(stderr,
+ "%s: has active nvdimm bridge, abort label write\n",
+ cxl_memdev_get_devname(memdev));
+ return -EBUSY;
+ }
+
+ rc = cxl_memdev_zero_label(memdev, size, param.offset);
+ if (rc < 0)
+ fprintf(stderr, "%s: label zeroing failed: %s\n",
+ cxl_memdev_get_devname(memdev), strerror(-rc));
+
+ return rc;
+}
+
+static int action_write(struct cxl_memdev *memdev, struct action_context *actx)
+{
+ size_t size = param.len, read_len;
+ unsigned char *buf;
+ int rc;
+
+ if (cxl_memdev_nvdimm_bridge_active(memdev)) {
+ fprintf(stderr,
+ "%s: has active nvdimm bridge, abort label write\n",
+ cxl_memdev_get_devname(memdev));
+ return -EBUSY;
+ }
+
+ if (!size) {
+ size_t label_size = cxl_memdev_get_label_size(memdev);
+
+ fseek(actx->f_in, 0L, SEEK_END);
+ size = ftell(actx->f_in);
+ fseek(actx->f_in, 0L, SEEK_SET);
+
+ if (size > label_size) {
+ fprintf(stderr,
+ "File size (%zu) greater than label area size (%zu), aborting\n",
+ size, label_size);
+ return -EINVAL;
+ }
+ }
+
+ buf = calloc(1, size);
+ if (!buf)
+ return -ENOMEM;
+
+ read_len = fread(buf, 1, size, actx->f_in);
+ if (read_len != size) {
+ rc = -ENXIO;
+ goto out;
+ }
+
+ rc = cxl_memdev_write_label(memdev, buf, size, param.offset);
+ if (rc < 0)
+ fprintf(stderr, "%s: label write failed: %s\n",
+ cxl_memdev_get_devname(memdev), strerror(-rc));
+
+out:
+ free(buf);
+ return rc;
+}
+
+static int action_read(struct cxl_memdev *memdev, struct action_context *actx)
+{
+ size_t size, write_len;
+ char *buf;
+ int rc;
+
+ if (param.len)
+ size = param.len;
+ else
+ size = cxl_memdev_get_label_size(memdev);
+
+ buf = calloc(1, size);
+ if (!buf)
+ return -ENOMEM;
+
+ rc = cxl_memdev_read_label(memdev, buf, size, param.offset);
+ if (rc < 0) {
+ fprintf(stderr, "%s: label read failed: %s\n",
+ cxl_memdev_get_devname(memdev), strerror(-rc));
+ goto out;
+ }
+
+ write_len = fwrite(buf, 1, size, actx->f_out);
+ if (write_len != size) {
+ rc = -ENXIO;
+ goto out;
+ }
+ fflush(actx->f_out);
+
+out:
+ free(buf);
+ return rc;
+}
+
+static int memdev_action(int argc, const char **argv, struct cxl_ctx *ctx,
+ int (*action)(struct cxl_memdev *memdev, struct action_context *actx),
+ const struct option *options, const char *usage)
+{
+ struct cxl_memdev *memdev, *single = NULL;
+ struct action_context actx = { 0 };
+ int i, rc = 0, count = 0, err = 0;
+ const char * const u[] = {
+ usage,
+ NULL
+ };
+ unsigned long id;
+
+ argc = parse_options(argc, argv, options, u, 0);
+
+ if (argc == 0)
+ usage_with_options(u, options);
+ for (i = 0; i < argc; i++) {
+ if (strcmp(argv[i], "all") == 0) {
+ argv[0] = "all";
+ argc = 1;
+ break;
+ }
+
+ if (sscanf(argv[i], "mem%lu", &id) != 1) {
+ fprintf(stderr, "'%s' is not a valid memdev name\n",
+ argv[i]);
+ err++;
+ }
+ }
+
+ if (err == argc) {
+ usage_with_options(u, options);
+ return -EINVAL;
+ }
+
+ if (!param.outfile)
+ actx.f_out = stdout;
+ else {
+ actx.f_out = fopen(param.outfile, "w+");
+ if (!actx.f_out) {
+ fprintf(stderr, "failed to open: %s: (%s)\n",
+ param.outfile, strerror(errno));
+ rc = -errno;
+ goto out;
+ }
+ }
+
+ if (!param.infile) {
+ actx.f_in = stdin;
+ } else {
+ actx.f_in = fopen(param.infile, "r");
+ if (!actx.f_in) {
+ fprintf(stderr, "failed to open: %s: (%s)\n",
+ param.infile, strerror(errno));
+ rc = -errno;
+ goto out_close_fout;
+ }
+ }
+
+ if (param.verbose)
+ cxl_set_log_priority(ctx, LOG_DEBUG);
+
+ rc = 0;
+ err = 0;
+ count = 0;
+
+ for (i = 0; i < argc; i++) {
+ if (sscanf(argv[i], "mem%lu", &id) != 1
+ && strcmp(argv[i], "all") != 0)
+ continue;
+
+ cxl_memdev_foreach (ctx, memdev) {
+ if (!util_cxl_memdev_filter(memdev, argv[i]))
+ continue;
+
+ if (action == action_write) {
+ single = memdev;
+ rc = 0;
+ } else
+ rc = action(memdev, &actx);
+
+ if (rc == 0)
+ count++;
+ else if (rc && !err)
+ err = rc;
+ }
+ }
+ rc = err;
+
+ if (action == action_write) {
+ if (count > 1) {
+ error("write-labels only supports writing a single memdev\n");
+ usage_with_options(u, options);
+ return -EINVAL;
+ } else if (single) {
+ rc = action(single, &actx);
+ if (rc)
+ count = 0;
+ }
+ }
+
+ if (actx.f_in != stdin)
+ fclose(actx.f_in);
+
+ out_close_fout:
+ if (actx.f_out != stdout)
+ fclose(actx.f_out);
+
+ out:
+ /*
+ * count if some actions succeeded, 0 if none were attempted,
+ * negative error code otherwise.
+ */
+ if (count > 0)
+ return count;
+ return rc;
+}
+
+int cmd_write_labels(int argc, const char **argv, struct cxl_ctx *ctx)
+{
+ int count = memdev_action(argc, argv, ctx, action_write, write_options,
+ "cxl write-labels <memdev> [-i <filename>]");
+
+ fprintf(stderr, "wrote %d mem%s\n", count >= 0 ? count : 0,
+ count > 1 ? "s" : "");
+ return count >= 0 ? 0 : EXIT_FAILURE;
+}
+
+int cmd_read_labels(int argc, const char **argv, struct cxl_ctx *ctx)
+{
+ int count = memdev_action(argc, argv, ctx, action_read, read_options,
+ "cxl read-labels <mem0> [<mem1>..<memN>] [-o <filename>]");
+
+ fprintf(stderr, "read %d mem%s\n", count >= 0 ? count : 0,
+ count > 1 ? "s" : "");
+ return count >= 0 ? 0 : EXIT_FAILURE;
+}
+
+int cmd_zero_labels(int argc, const char **argv, struct cxl_ctx *ctx)
+{
+ int count = memdev_action(argc, argv, ctx, action_zero, zero_options,
+ "cxl zero-labels <mem0> [<mem1>..<memN>] [<options>]");
+
+ fprintf(stderr, "zeroed %d mem%s\n", count >= 0 ? count : 0,
+ count > 1 ? "s" : "");
+ return count >= 0 ? 0 : EXIT_FAILURE;
+}
@@ -19,7 +19,10 @@ endif
man1_MANS = \
cxl.1 \
- cxl-list.1
+ cxl-list.1 \
+ cxl-read-labels.1 \
+ cxl-write-labels.1 \
+ cxl-zero-labels.1
EXTRA_DIST = $(man1_MANS)
@@ -10,6 +10,7 @@ config.h: $(srcdir)/Makefile.am
cxl_SOURCES =\
cxl.c \
list.c \
+ memdev.c \
../util/json.c \
builtin.h