diff mbox series

mem/cxl-type3: Add sn option to provide serial number for PCI ecap

Message ID 20220923161835.9805-1-Jonathan.Cameron@huawei.com
State New, archived
Headers show
Series mem/cxl-type3: Add sn option to provide serial number for PCI ecap | expand

Commit Message

Jonathan Cameron Sept. 23, 2022, 4:18 p.m. UTC
The Device Serial Number Extended Capability PCI r6.0 sec 7.9.3
provides a standard way to provide a device serial number as
an IEEE defined 64-bit extended unique identifier EUI-64.

CXL 2.0 section 8.1.12.2 Memory Device PCIe Capabilities and
Extended Capabilities requires this to be used to uniquely
identify CXL memory devices.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---

This is the missing element to be able to use the Linux kernel
support for PMEM region creation.  Without this you can create
a region, but not remount it after reboot (as the label
is not valid).

 hw/mem/cxl_type3.c          | 14 +++++++++++++-
 include/hw/cxl/cxl_device.h |  1 +
 2 files changed, 14 insertions(+), 1 deletion(-)

Comments

Ben Widawsky Sept. 27, 2022, 4:45 p.m. UTC | #1
On 22-09-23 17:18:35, Jonathan Cameron wrote:
> The Device Serial Number Extended Capability PCI r6.0 sec 7.9.3
> provides a standard way to provide a device serial number as
> an IEEE defined 64-bit extended unique identifier EUI-64.
> 
> CXL 2.0 section 8.1.12.2 Memory Device PCIe Capabilities and
> Extended Capabilities requires this to be used to uniquely
> identify CXL memory devices.
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reviewed-by: Ben Widawsky <bwidawsk@kernel.org>

> ---
> 
> This is the missing element to be able to use the Linux kernel
> support for PMEM region creation.  Without this you can create
> a region, but not remount it after reboot (as the label
> is not valid).
> 
>  hw/mem/cxl_type3.c          | 14 +++++++++++++-
>  include/hw/cxl/cxl_device.h |  1 +
>  2 files changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index 3bf2869573..e0c1535b73 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -14,6 +14,12 @@
>  #include "sysemu/hostmem.h"
>  #include "hw/cxl/cxl.h"
>  
> +/*
> + * Null value of all Fs suggested by IEEE RA guidelines for use of
> + * EU, OUI and CID
> + */
> +#define UI64_NULL ~(0ULL)
> +
>  static void build_dvsecs(CXLType3Dev *ct3d)
>  {
>      CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
> @@ -149,7 +155,12 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp)
>      pci_config_set_class(pci_conf, PCI_CLASS_MEMORY_CXL);
>  
>      pcie_endpoint_cap_init(pci_dev, 0x80);
> -    cxl_cstate->dvsec_offset = 0x100;
> +    if (ct3d->sn != UI64_NULL) {
> +        pcie_dev_ser_num_init(pci_dev, 0x100, ct3d->sn);
> +        cxl_cstate->dvsec_offset = 0x100 + 0x0c;
> +    } else {
> +        cxl_cstate->dvsec_offset = 0x100;
> +    }

Perhaps just always make it 0x10c to keep it simple and debuggable?

>  
>      ct3d->cxl_cstate.pdev = pci_dev;
>      build_dvsecs(ct3d);
> @@ -275,6 +286,7 @@ static Property ct3_props[] = {
>                       HostMemoryBackend *),
>      DEFINE_PROP_LINK("lsa", CXLType3Dev, lsa, TYPE_MEMORY_BACKEND,
>                       HostMemoryBackend *),
> +    DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, UI64_NULL),
>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index 1e141b6621..e4d221cdb3 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -237,6 +237,7 @@ struct CXLType3Dev {
>      /* Properties */
>      HostMemoryBackend *hostmem;
>      HostMemoryBackend *lsa;
> +    uint64_t sn;
>  
>      /* State */
>      AddressSpace hostmem_as;
> -- 
> 2.32.0
>
diff mbox series

Patch

diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 3bf2869573..e0c1535b73 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -14,6 +14,12 @@ 
 #include "sysemu/hostmem.h"
 #include "hw/cxl/cxl.h"
 
+/*
+ * Null value of all Fs suggested by IEEE RA guidelines for use of
+ * EU, OUI and CID
+ */
+#define UI64_NULL ~(0ULL)
+
 static void build_dvsecs(CXLType3Dev *ct3d)
 {
     CXLComponentState *cxl_cstate = &ct3d->cxl_cstate;
@@ -149,7 +155,12 @@  static void ct3_realize(PCIDevice *pci_dev, Error **errp)
     pci_config_set_class(pci_conf, PCI_CLASS_MEMORY_CXL);
 
     pcie_endpoint_cap_init(pci_dev, 0x80);
-    cxl_cstate->dvsec_offset = 0x100;
+    if (ct3d->sn != UI64_NULL) {
+        pcie_dev_ser_num_init(pci_dev, 0x100, ct3d->sn);
+        cxl_cstate->dvsec_offset = 0x100 + 0x0c;
+    } else {
+        cxl_cstate->dvsec_offset = 0x100;
+    }
 
     ct3d->cxl_cstate.pdev = pci_dev;
     build_dvsecs(ct3d);
@@ -275,6 +286,7 @@  static Property ct3_props[] = {
                      HostMemoryBackend *),
     DEFINE_PROP_LINK("lsa", CXLType3Dev, lsa, TYPE_MEMORY_BACKEND,
                      HostMemoryBackend *),
+    DEFINE_PROP_UINT64("sn", CXLType3Dev, sn, UI64_NULL),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 1e141b6621..e4d221cdb3 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -237,6 +237,7 @@  struct CXLType3Dev {
     /* Properties */
     HostMemoryBackend *hostmem;
     HostMemoryBackend *lsa;
+    uint64_t sn;
 
     /* State */
     AddressSpace hostmem_as;