@@ -22,6 +22,7 @@
#include "qemu/range.h"
#include "hw/pci/pci_bridge.h"
#include "hw/pci/pcie_port.h"
+#include "hw/pci/msi.h"
#include "hw/qdev-properties.h"
#include "hw/sysbus.h"
#include "qapi/error.h"
@@ -29,6 +30,10 @@
#define CXL_ROOT_PORT_DID 0x7075
+#define CXL_RP_MSI_OFFSET 0x60
+#define CXL_RP_MSI_SUPPORTED_FLAGS PCI_MSI_FLAGS_MASKBIT
+#define CXL_RP_MSI_NR_VECTOR 2
+
/* Copied from the gen root port which we derive */
#define GEN_PCIE_ROOT_PORT_AER_OFFSET 0x100
#define GEN_PCIE_ROOT_PORT_ACS_OFFSET \
@@ -47,6 +52,49 @@ typedef struct CXLRootPort {
#define TYPE_CXL_ROOT_PORT "cxl-rp"
DECLARE_INSTANCE_CHECKER(CXLRootPort, CXL_ROOT_PORT, TYPE_CXL_ROOT_PORT)
+/*
+ * If two MSI vector are allocated, Advanced Error Interrupt Message Number
+ * is 1. otherwise 0.
+ * 17.12.5.10 RPERRSTS, 32:27 bit Advanced Error Interrupt Message Number.
+ */
+static uint8_t cxl_rp_aer_vector(const PCIDevice *d)
+{
+ switch (msi_nr_vectors_allocated(d)) {
+ case 1:
+ return 0;
+ case 2:
+ return 1;
+ case 4:
+ case 8:
+ case 16:
+ case 32:
+ default:
+ break;
+ }
+ abort();
+ return 0;
+}
+
+static int cxl_rp_interrupts_init(PCIDevice *d, Error **errp)
+{
+ int rc;
+
+ rc = msi_init(d, CXL_RP_MSI_OFFSET, CXL_RP_MSI_NR_VECTOR,
+ CXL_RP_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
+ CXL_RP_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT,
+ errp);
+ if (rc < 0) {
+ assert(rc == -ENOTSUP);
+ }
+
+ return rc;
+}
+
+static void cxl_rp_interrupts_uninit(PCIDevice *d)
+{
+ msi_uninit(d);
+}
+
static void latch_registers(CXLRootPort *crp)
{
uint32_t *reg_state = crp->cxl_cstate.crb.cache_mem_registers;
@@ -183,6 +231,15 @@ static void cxl_rp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
}
}
+static void cxl_rp_aer_vector_update(PCIDevice *d)
+{
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(d);
+
+ if (rpc->aer_vector) {
+ pcie_aer_root_set_vector(d, rpc->aer_vector(d));
+ }
+}
+
static void cxl_rp_write_config(PCIDevice *d, uint32_t address, uint32_t val,
int len)
{
@@ -192,6 +249,7 @@ static void cxl_rp_write_config(PCIDevice *d, uint32_t address, uint32_t val,
pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
pci_bridge_write_config(d, address, val, len);
+ cxl_rp_aer_vector_update(d);
pcie_cap_flr_write_config(d, address, val, len);
pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
pcie_aer_write_config(d, address, val, len);
@@ -220,6 +278,9 @@ static void cxl_root_port_class_init(ObjectClass *oc, void *data)
rpc->aer_offset = GEN_PCIE_ROOT_PORT_AER_OFFSET;
rpc->acs_offset = GEN_PCIE_ROOT_PORT_ACS_OFFSET;
+ rpc->aer_vector = cxl_rp_aer_vector;
+ rpc->interrupts_init = cxl_rp_interrupts_init;
+ rpc->interrupts_uninit = cxl_rp_interrupts_uninit;
dc->hotpluggable = false;
}
Done to avoid fixing ACPI route description of traditional PCI interrupts on q35 and because we should probably move with the times anyway. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- hw/pci-bridge/cxl_root_port.c | 61 +++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+)